Advanced Search
MIAO Yu gang, LIU Li ming, ZHAO Jie, DING De kai. Microstructure feature analysis of fusion welded joint of wrought Mg-alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (2): 63-66.
Citation: MIAO Yu gang, LIU Li ming, ZHAO Jie, DING De kai. Microstructure feature analysis of fusion welded joint of wrought Mg-alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (2): 63-66.

Microstructure feature analysis of fusion welded joint of wrought Mg-alloy

More Information
  • Received Date: August 04, 2002
  • In this paper,the microstructures,phase constituent and micro zone analysis of AZ31B wrought Mg alloy welded joint were investigated by optical microscope,XRD and EPMA.The results showed that the fibrous structure of AZ31B Mg alloy disappeared;the fine crystal grain appeared in weld metal and the microstructure of heat affected zone (HAZ) obviously became coarse.The fine equiaxed grains were observed in the weld metal,the microstructure at room temperature consists of δ-Mg phase and compound of γ-Mg17Al12.It found the Mg content in the weld metal is lower than parent metal,however,Al content is higher than parent metal,at the same time there are the segregation of Mg,Al and Zn elements in weld metal.
  • Related Articles

    [1]XU Liang, LI Kangning, YANG Haifeng, SONG Kunlin, GU Shiwei. Effect of microtexturing characteristics on the performance of laser welded aluminum alloy-CFRTP joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(2): 75-81. DOI: 10.12073/j.hjxb.20230915001
    [2]ZHANG Liangliang, WANG Xijing, WEI Xueling, LIU Xiao, CHAI Tingxi. Effect of rotation speed on texture type in friction stir welding joint for 6082-T6 aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(3): 128-132. DOI: 10.12073/j.hjxb.2019400085
    [3]MA Tiejun, XIAO Yao, LI Wenya, YANG Xiawei. Investigation on microstructure and texture evolution of linear friction welded IN718 superalloy joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(11): 119-123.
    [4]WANG Hongfeng, WANG Jianli, ZUO Dunwen, SONG Weiwei, JI Ling. Fatigue analysis of TC11/TC17 heterogeneous titanium alloy linear friction jointing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 81-84.
    [5]TIE Min, LI Hong, LI Zhuoxin, WOLFGANG Tillmann. Effect on wettability of borosilicate glass on kovar alloy using electron beam surface texturing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 61-64.
    [6]LIU Hai, ZHANG Lixia, REN Wei, FENG Jicai. Vacuum diffusion bonding of surface textured stainless steel and aluminum[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 41-44.
    [7]ZHANG Lixia, ZHANG Ruoheng, YANG Jinghong, LEI Min. Vacuum diffusion bonding of textured WC-Co cemented carbide and aluminum[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(1): 95-98.
    [8]WANG Guoqing, SONG Zhihua, WU Aiping, ZHAO Yifu, ZOU Guisheng, REN Jialie. EBSD analysis of microstructure and texture of Ti3Al alloy laser welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (4): 63-66.
    [9]ZOU Yirong, WU Zheming, ZENG Kai, DU Dong. Visual recognition in weld seam tracking based on texture features[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (5): 13-16.
    [10]WANG Shenghua, DU Dong, ZENG Kai, ZOU Yirong. Weld recognition based on texture feature[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (11): 5-8.
  • Cited by

    Periodical cited type(4)

    1. 张群兵,东拓,谭猛猛,门浩翔,张建勋. TC17钛合金激光焊接接头微观组织和力学性能. 机械制造文摘(焊接分册). 2024(02): 1-5 .
    2. 张春波,袁明强,周军,全威,孙佳佳,乌彦全,王志永. 42CrMo/GH4169异种金属惯性摩擦焊工艺. 焊接. 2023(08): 6-13 .
    3. 何光进,李川,吴厦,李昊瑜,陈大军,付扬帆,刘正涛,代野,莫非,江波. 铝合金线性摩擦焊研究现状. 精密成形工程. 2022(06): 131-140 .
    4. 李睿,周军,张春波,乌彦全,梁武,秦丰. TC4/Ti17异质钛合金线性摩擦焊接头组织及力学性能. 机械制造文摘(焊接分册). 2021(02): 11-17 .

    Other cited types(6)

Catalog

    Article views (215) PDF downloads (64) Cited by(10)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return