Advanced Search
WU Tongli, WANG Kehong, YANG Jiajia, ZHOU Xiaoxia. High frequency hybrid twin-electrode TIG welding method and digital power supply design[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(9): 117-121,128. DOI: 10.12073/j.hjxb.2018390236
Citation: WU Tongli, WANG Kehong, YANG Jiajia, ZHOU Xiaoxia. High frequency hybrid twin-electrode TIG welding method and digital power supply design[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(9): 117-121,128. DOI: 10.12073/j.hjxb.2018390236
shu

High frequency hybrid twin-electrode TIG welding method and digital power supply design

  • School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

More Information
  • Received Date: November 22, 2017
    Graphical Abstract
    • Abstract
  • A new high quality and low consumption type of non-melting welding method was put forward, and a high frequency hybrid T-TIG power supply was developed, which could output two type current waveforms simultaneously. One was high frequency square current waveform with base current of 0~300 A, peak current of 0~100 A, frequency of 0~80 kHz, duty ratio of 0~100%, current rate of change up to 50 A/μs. The other was variable polarity square wave pulse current waveform with output current amplitude of 0~500 A, frequency of 0~100 Hz, duty ratio of 0~100%, current rate of change up to 300 A/ms. The test results of the power source indicated that the design of high frequency hybrid T-TIG power source has reached the anticipated design object, and the high frequency square current still has a rapid rising and falling edge change rate at the frequency of 80 kHz. At last, the welding test was carried out by using aluminum alloy plate, and the test results shown that the welding process was stable and the weld molding was good.
    • FullText(HTML)
    • References (10)
  • 王文翰. 焊接技术手册[M]. 郑州:河南科学技术出版社, 2002.
    Kobayashi K, Nishimura Y, Iijima T, et al. Practical application of high efficiency twin-arc TIG welding method (sedar-TIG) for pclng storage tank[J]. Welding in the World, 2013, 48(7-8):35-39.
    Kobayashi K, Yuki M, Tejima A, et al. Development of high efficiency TIG welding method (SEDAR-TIG)[J]. Ishikawajima-Harima Giho, 2002, 35(42):137-142.
    杨春利, 林三宝. 电弧焊基础[M]. 哈尔滨:哈尔滨工业大学出版社, 2003.
    王树保, 张海宽, 冷雪松, 等. 双钨极氩弧焊工艺及焊缝成形机理分析[J]. 焊接学报, 2007, 28(2):21-24 Wang Shubao, Zhang Haikuan, Leng Xuesong, et al. Twin-electrode TIG welding procedure and mechanism of weld formation[J]. Transactions of the China Welding Institution, 2007, 28(2):21-24, doi: 10.3321/j.issn:0253-360X.2007.02.006
    Mazzola M S, Molen G M. Modeling of a DC glow plasma loudspeaker[J]. The Journal of the Acoustical Society of America, 1987, 81(6):1972-1978. doi: 10.1121/1.394762
    吴敏生, 段向阳, 李路明, 等. 电弧超声的激发及其特性研究[J]. 清华大学学报(自然科学版), 1999, 39(6):110-112 Wu Minsheng, Duan Xiangyang, Li Luming, et al. Study of arc-ultrasonic excitation and its characteristics[J]. Journal of Tsinghua University:Science and Technology, 1999, 39(6):110-112, doi: 10.3321/j.issn:1000-0054.1999.06.031
    齐铂金, 许海鹰, 周兴国, 等. 快变换超音频直流脉冲TIG焊[J]. 焊接学报, 2009, 30(7):57-60 Qi Bojin, Xu Haiying, Zhou Xingguo, et al. Fast transform ultra-sonic pulse TIG welding[J]. Transactions of the China Welding Institution, 2009, 30(7):57-60, doi: 10.3321/j.issn:0253-360X.2009.07.015
    王建军, 林涛. 电弧超声激励共熔池双钨极氩弧焊接方法[J]. 上海交通大学学报, 2011, 45(1):15-18 Wang Jianjun, Lin Tao. Twin-arc TIG welding with ultrasonic excitation[J]. Journal of Shanghai Jiaotong University, 2011, 45(1):15-18, doi: 10.3969/j.issn.1674-8115.2011.01.004
    Morisada Y, Fujii H, Inagaki F, et al. Development of high frequency tungsten inert gas welding method[J]. Materials & Design, 2013, 44:12-16.
    • Related Articles

  • Related Articles

    [1]FENG Yulan, WU Zhisheng, SUN Zhiyu. Numerical simulation of the influence of thickness of cladding material on stress and strain of welded joint of stainless steel composite plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(1): 73-82. DOI: 10.12073/j.hjxb.20230606001
    [2]YUAN Jiaxin, SHAO Fei, BAI Linyue, XU Qian, SUN Bin, WANG Jingtao. Research on the interface of composite plate via explosive welding TC1/1060/6061 based on experiments and numerical simulations[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(9): 81-87. DOI: 10.12073/j.hjxb.20221020002
    [3]TIAN Qichao, MA Honghao, SHEN Zhaowu, CHEN Zijun, ZHAO Kai, Zhao Yang. Explosive welding and performance test of Al0.1CoCrFeNi high-entropy alloy/TA2 composite plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(6): 22-29. DOI: 10.12073/j.hjxb.20200506002
    [4]WANG Bin, LI Sheng, ZHU Fuhui, LI Xifeng. Evaluation on interfacial defect size of diffusion bonding based on ultrasonic non-destructive testing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(8): 34-38. DOI: 10.12073/j.hjxb.20200323004
    [5]FANG Zhonghang, SHI Changgen, FENG Ke, GE Yuheng, YOU Jun. Explosive welding experiment and property test of TA2-1060-TA2 cladding plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(9): 87-92. DOI: 10.12073/j.hjxb.2019400241
    [6]LIAO Dongbo, ZHA Wusheng, LI Wei. Microstructure of stainless steel-carbon steel composite plates produced by explosive welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (5): 99-102.
    [7]ZHANG Bao-qi, WANG De-he, LI Xiao-jie, YANG Wen-bin. Analysis of microstructure in bond interfacial zone of 321-15CrMoR composite plate by explosive welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (2): 108-112.
    [8]LU Ming, WANG Yao-hua, YOU Jun, CAI Li-gen. Explosive Welding Test and Performance Study on Composite Sheet of Tool-Steel with Q235 Carbon-Steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (4): 47-50.
    [9]Fan Jingyun, Wan Guoqing, Fan Jingshun. Electro-magnetic Non-destructive Testing of Friction Welding Defects[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1997, (1): 43-49.
    [10]Liu Huoxiang, Guo Rongyuan. HYDRAULIC DESTRUCTION AND FATIGUE TESTS OF CYLINDRICAL MODEL VESSEL WITH DECLIVOUS CRACKS[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1981, (3): 111-122.

  • Cited by

    Periodical cited type(10)

    1. 胡超杰，杜阿龙，杨露露，杨斌. 复合材料承压结构健康监测技术研究进展. 力学季刊. 2024(03): 593-613 .
    2. 冯飞，傅彦青，常海林，李洁，曾周燏，李伟. 不锈钢复合板制备及其焊接技术研究进展. 工业建筑. 2024(12): 71-89 .
    3. 刘海春，贾涛，刘宇恒，迟大钊. 高强铝合金T形接头缺陷超声TOFD检测. 焊接. 2024(12): 67-73 .
    4. 刘爱国. 虚拟卧式压力容器焊接生产线设计. 机械制造文摘(焊接分册). 2023(03): 39-43 .
    5. 臧伟，袁雪婷，郭龙创，张杭永. 电站冷凝器用钛钢复合板结合界面均匀性研究. 压力容器. 2022(01): 34-39+68 .
    6. 吴三孩，石端虎，历长云，赵洪枫，米国发. 基于列处理的T型焊件微焦点X射线检测图像缺陷分割. 热加工工艺. 2022(07): 114-118 .
    7. 代欣欣，高向东，郑俏俏，季玉坤. 焊缝缺陷磁光成像模糊聚类识别方法. 焊接学报. 2021(01): 54-57+101 . 本站查看
    8. 孙倩，陈菁，崔晓玉，范蕙萍，张罡. 钛/钢复合板显微组织及拉伸和疲劳断口分析. 兵器材料科学与工程. 2021(03): 128-132 .
    9. 韩玉改，刘宝剑，孙靖东，李二兴. 超厚爆炸复合板覆层裂纹分析. 电焊机. 2020(05): 54-56+135-136 .
    10. 魏于波. 无损检测技术在压力容器检验中的应用研究. 设备监理. 2019(12): 36-37 .

    Other cited types(2)

Catalog

    Get Citation
    XML
    Article views (608) PDF downloads (165) Cited by(12)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return