Advanced Search
WU Mingfang, WANG Fei, WANG Fengjiang, XU Guoxiang. Pulse current auxiliary liquid diffusion bonding between Ti (C,N)-Al203 CMC and 40Cr steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(6): 31-34.
Citation: WU Mingfang, WANG Fei, WANG Fengjiang, XU Guoxiang. Pulse current auxiliary liquid diffusion bonding between Ti (C,N)-Al203 CMC and 40Cr steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(6): 31-34.
shu

Pulse current auxiliary liquid diffusion bonding between Ti (C,N)-Al203 CMC and 40Cr steel

  • Provincial Key Laboratory of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang 212003, China

More Information
  • Received Date: September 23, 2013
    Graphical Abstract
    • Abstract
  • Diffusion bonding behavior between Ti(C,N)-Al203 ceramic matrix composites (CMC) and 40Cr steel was investigated using pulse current auxiliary liquid diffusion bonding process. The effect of aided pulse current and holding time during diffusion bonding on the element distribution, phase structure and thickness of the reactive layer at the interface was characterized. The results show that aided pulse current during diffusion bonding promoted the metallurgical bonding between CMC and 40Cr steel. The corresponding joint strength was about 146~180 MPa and was not obviously affected by the holding time during bonding. The diffusion path and rate of atoms at the interface were apparently changed by the loading of pulse current during diffusion bonding. Consequently, the growth of interfacial inter-metallic compounds and the content of low melting point eutectic phases could be controlled to improve the joint strength.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]ZHANG Xiaoli, LI Yuzhen, LONG Peng, XUE Jiaxiang. Pulsed MIG welding of aluminum alloy sheet based on fuzzy self-tuning PID control[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (11): 83-87.
    [2]HUANG Jiankang, ZHANG Gang, FAN Ding, SHI Yu. Decoupling control analysis of aluminum alloy pulse MIG welding process based on dynamic fuzzy neural networks[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (9): 43-47.
    [3]LÜ Yan, TIAN Xincheng, LIANG Jun. Decoupling control design and simulation of aluminum alloy pulsed MIG welding based on dynamic PLS framework[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (6): 17-20.
    [4]LU Lihui, SHI Yu, HUANG Jiankang, FAN Jiawei, FAN Ding. Vision sensing and control for wire extension in pulsed MIG welding of aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (7): 63-66.
    [5]HUANG Jiankang, SHI Yu, LU Lihui, ZHU Ming, FAN Ding. Weld width control of double pulsed MIG welding for aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (5): 13-16.
    [6]SHI Yu, XUE Cheng, FAN Ding, LI Jianjun. Modeling and simulation of decoupling control system of aluminum pulsed MIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (5): 9-12.
    [7]HAN Jing-hua, SHAN Ping, HU Sheng-sun, LU Ya-jing. Modeing and simulation of digital signal processor-based pulsed metal inert-gas welding digital control system[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (6): 91-94.
    [8]GUO Hai-yun, LI Huan, LIU Qiong, WANG Jiong-xiang, LIU Xin-quan, ZHAO Wei-zhen, FU Yu-wen. Effect of pulsed parameters on dynamic simulating waveform of pulsed submergedarc welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (9): 61-64.
    [9]WU Feng-shun, LU Zhong-liang, WANG Lei, HU Yan-xiang, XIE Ming-li. Application of statistical process control in submerged arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (2): 69-72,76.
    [10]Yin Shuyan, Gang Tie, Bu Huaquan. Microcumputer control system of synergic pulsed MIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1991, (1): 46-52.

  • Cited by

    Periodical cited type(12)

    1. 周勇，张成文，张国军，李纪运，付芳艳，王洪铎. MAG焊接技术研究进展. 热加工工艺. 2023(15): 6-12 .
    2. 徐刚，张天雷，何林基，沈艳涛，马春伟. 摆动电弧窄间隙厚板焊接工艺与熔池演变数值研究. 轻工机械. 2021(01): 40-46 .
    3. 彭广涛，张义顺，张华军，兰虎. 弧间距对T形接头全熔透横角焊缝成形的影响. 焊接技术. 2021(04): 24-28 .
    4. 莫春立，李贞尚，赵磊，常云龙. TIG焊熔池流动及温度分布的数值模拟. 沈阳航空航天大学学报. 2021(02): 28-34 .
    5. 张义顺，丛林，张华军. 中厚板立向角焊缝机器人深熔焊接工艺. 沈阳工业大学学报. 2021(06): 635-640 .
    6. 王子然，赵宝，李洪涛，李荣，王克南. U型钢机器人快速MAG焊接工艺研究. 机械制造文摘(焊接分册). 2019(02): 19-25 .
    7. 王子然，张善保，杨战利，杨义成. 间隙对GMAW立焊熔滴过渡的影响及温度场特性. 焊接学报. 2019(05): 89-94+165 . 本站查看
    8. 胥国祥，朱杰，王加友，李林，郑志强. 摇动电弧窄间隙FCAW立焊流体流动数值分析模型. 机械工程学报. 2019(18): 63-69 .
    9. 洪宇翔，汤小虎，唐碧波，芦川. 摆动电弧立焊熔池热源模型及电流波形分析. 电焊机. 2018(11): 1-6 .
    10. 袁帅，刘文吉，李亮玉，蒋晓. 考虑侧壁熔合的摆动电弧窄间隙MAG焊温度场热源模型. 焊接学报. 2018(12): 95-99+133 . 本站查看
    11. 胥国祥，潘海潮，王加友. 摇动电弧窄间隙GMAW焊温度场数值分析模型. 焊接学报. 2017(10): 55-60+131 . 本站查看
    12. 江祥胜，许燕，周建平，单雪海. 基于金属粉末支撑的堆焊成形铺粉系统研究. 机床与液压. 2017(13): 15-18+80 .

    Other cited types(14)

Catalog

    Get Citation
    PDF
    XML
    Article views (199) PDF downloads (88) Cited by(26)
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return