王加友，杨 峰，韩 伟. 摇动电弧窄间隙熔化极气体保护焊接方法及焊炬:中国, 200810236274.5[P], 2008-11-19.[2] 任志鹏. 电弧摆动式NG-GMAW焊枪及其工艺性能[D]. 上海：上海交通大学，2013.[3] 朱 杰. 摇动电弧窄间隙焊接系统的单机控制研究[D]. 镇江：江苏科技大学, 2009.[4] Wang J Y, Zhu J, Zhang C,et al. Development of swing arc narrow gap vertical welding process[J]. ISIJ International, 2015, 55(5): 1076-1082.[5] Wang J Y, Zhu J, Fu P,et al. A swing arc system for narrow gap GMA welding[J]. ISIJ International, 2012, 52(1):110-114.[6] 姬书得，方洪渊，刘雪松，等. 基于串状热源的手工摆动焊接压力场的数值模拟[J]. 焊接学报，2005, 26(5):46-48.Ji Shude, Fang Hongyuan, Liu Xuesong,et al. Numerical simulation of stress field of manual swing welding on basis of cluster heat source[J]. Transactions of the China Welding Institution, 2005, 26(5): 46-48.[7] 张华军，张广军，蔡春波，等. 摆动焊接动态过程温度场数值模拟[J]. 焊接学报，2008, 29(2): 65-68.Zhang Huajun, Zhang Guangjun, Cai Chunbo,et al. Numerical simulation of temperature field of dynamic welding process with weaving[J]. Transactions of the China Welding Institution, 2008, 29(2): 65-68.[8] 兰 虎，张华军，陈阿静，等. 窄间隙GMAW立焊动态过程模拟及热物理特性[J]. 焊接学报，2015，36(7): 77-82.Lan Hu, Zhang Huajun, Chen Ajing,et al. Numerical simulation of dynamic process and thermal physical properties of narrow gap MAG vertical welding[J]. Transactions of the China Welding Institution, 2015, 36(7): 77-82.[9] 方臣富，陈志伟，胥国祥，等. 缆式焊丝CO2气体保护焊工艺研究[J]. 金属学报，2012,48(11): 1299-1305.Fang Chenfu, Chen Zhiwei, Xu Guoxiang,et al. Study on the process of CTWW CO2gas shielded welding[J]. Acta Metallurgica Sinca, 2012, 48(11): 1299-1305.