Advanced Search
LI Guo, GONG Jianming, CHEN Hu. Finite element analysis and nanoindentation-based experiment of residual stress of SS304/BNi-2/SS304 stainless steel brazed joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (7): 79-82,86.
Citation: LI Guo, GONG Jianming, CHEN Hu. Finite element analysis and nanoindentation-based experiment of residual stress of SS304/BNi-2/SS304 stainless steel brazed joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (7): 79-82,86.
shu

Finite element analysis and nanoindentation-based experiment of residual stress of SS304/BNi-2/SS304 stainless steel brazed joints

  • 1.

    School of Mechanical and Power Engineering, Nanjing University of Technology, Nanjing 210009, China

  • 2.

    Technical Development Department, Ningbo Special Equipment Inspection and Test Center, Ningbo 315020, Zhejiang, China

More Information
  • Received Date: February 04, 2009
    Graphical Abstract
    • Abstract
  • The numerical analysis was implemented on the residual stress of the SS304/BNi-2/SS304 T shape brazed joint by both finite element method(FEM) employing ABAQUS sequentially coupling code and Nanoindentation technology.The results show that the residual stress of the brazed joint produced due to the mechanical property mismatch of the base metal SS304 and the filler BNi-2.The residual stress which can induce the crack initiation and is maximum at the fillet and decreases gradually along the mid-seaming.The other zone is uniformity.So the fillet becomes the weakest area.The Nanoindentation test adopts the Suresh model and the experimental results are corresponded with the FEM and also prove the efficient and reliability of FEM.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]XU Xinxin, LIANG Xiaoguang, YANG Ruisheng, YAN Dongyang, ZHOU Li. Effect of welding residual stress on bearing capacity of fusion welded joint of 2219 aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(10): 17-22. DOI: 10.12073/j.hjxb.20200403004
    [2]HUANG Chaoqun1, LI Huan1, LUO Chuanguang1,2, SONG Yonglun3. Comparative study of blind hole method and indentation method in measuring residual stress of 2219 aluminum alloy arc-welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(7): 54-58. DOI: 10.12073/j.hjxb.20150710004
    [3]LIANG Wei, GUO Kefeng, GONG Yi, BIAN Gongwen. High precision prediction method of residual stress and welding distortion of aluminum alloy sheet[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(5): 58-62. DOI: 10.12073/j.hjxb.20170513
    [4]SUN Jiantong, LI Xiaoyan, ZHANG Liang, YAO Wentao. Study of residual stress measurement of rolling aluminum alloy using x-Ray diffraction method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(1): 61-64.
    [5]DING Sansan, LI Qiang, GOU Guoqing. Effect of residual stress on fatigue behavior of welded joint of A7N01 aluminum alloy for high-speed trcion[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(9): 23-28.
    [6]HUANG Zhiye, CHEN Furong. Finite element analysis of shot peening treatment to improve welding pesidual stress of 7A52 aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(3): 35-40.
    [7]WANG Xijing, Li Na, ZHANG Zhongke, Li Changri. FSW residual stress of aluminum alloy LY12[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (9): 81-84.
    [8]ZHOU Guangtao, LIU Xuesong, YANG Jianguo, YAN Dejun, FANG Hongyuan. Numerical simulation of welding residual stress for longitudinal straight weld seam for aluminum alloy thin-wall cylinder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (6): 89-92.
    [9]FU Pengfei, HUANG Rui, LIU Fangjun, ZUO Congjin. Microstructure and residual stress of TA12 titanium alloy with electron beam welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (2): 82-84.
    [10]WANG Hong-yang, CHI Ming-sheng, HUANG Rui-sheng, LIU Li-ming. Analysis on residual stress of hybrid laser-tungste inert gas arc welding of magnesium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (11): 33-36.

  • Cited by

    Periodical cited type(6)

    1. 蒋凡，张成钰，徐斌，张国凯，闫朝阳，陈树君. 变极性等离子弧焊技术发展及其在航天制造领域应用现状. 航天制造技术. 2024(03): 15-26 .
    2. 甘世明，张佳欣，包晓艳，韩永全，孙振邦. 能量配比对6 mm 7A52铝合金板材VPPA-MIG复合焊接残余应力分布的影响. 内蒙古工业大学学报(自然科学版). 2024(05): 461-466 .
    3. 邱劲松，马佳良，杨鑫华，许鸿吉. 钻孔法测大型构件焊接残余应力试验的误差分析与优化. 焊接技术. 2022(03): 27-33+114 .
    4. 梁巧云，蔺治强，张吉银，姚倡锋. 叶片铣削及喷丸加工残余应力测试与三维表征. 机械科学与技术. 2022(11): 1794-1804 .
    5. 黄如旭，谢晓忠，张平平，祁江涛，李艳青，黄进浩. 基于盲孔法的水下承压结构残余应力测试研究. 舰船科学技术. 2021(07): 23-27 .
    6. 李刚，李中双，符伟，谭俊哲，杨康. 焊接顺序对管状大厚度V形接头焊接残余应力场的影响. 材料导报. 2021(S2): 325-328 .

    Other cited types(2)

Catalog

    Get Citation
    PDF
    XML
    Article views (370) PDF downloads (120) Cited by(8)
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return