Advanced Search
HONG Bo, HUANG Mingcan, YIN Li, GONG Hai. Mathematical modeling and simulation on the lap welding groove of waving TIG[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (7): 43-46.
Citation: HONG Bo, HUANG Mingcan, YIN Li, GONG Hai. Mathematical modeling and simulation on the lap welding groove of waving TIG[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (7): 43-46.
shu

Mathematical modeling and simulation on the lap welding groove of waving TIG

  • Department of Mechanical Engineering, Xiangtan University, Xiangtan 411105, China

More Information
  • Received Date: July 31, 2007
    Graphical Abstract
    • Abstract
  • According to the character of the lap joint groove, the signal of the changing bulk of the column as the input signal was introduced into the mathematical model for the waving TIG welding of the lap joint groove, and the simulating model for the whole system accordingly was set up.Keeping the techniques parameters, the differences between the simulating results of this modeling, the traditional results which was made use of changing the height of the welding torch and the welding experiments results were analyzed and compared.It proves that the model reflectes the reality, and more accurate than the traditional ones.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]GU Yufen, BIAN Chunhong, LI Chunkai, SHI Yu. Effect of different component active fluxes on surface tension of weld pool in stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(6): 48-53. DOI: 10.12073/j.hjxb.20190911001
    [2]LI Liqun, HAO Yu, PENG Jin. Effect of surface tension on flow in laser deep penetration welding molten pool[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(2): 13-19. DOI: 10.12073/j.hjxb.2019400034
    [3]ZHANG Yong, SUN Linlin, TANG Jiacheng, TANG Mingyuan. Effect on liquid metal surface tension and TIG weld bead properties of Q235 steel by high silicon flyash[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(5): 92-96. DOI: 10.12073/j.hjxb.2018390130
    [4]SHEN Yanxu, LIN Tiesong, HE Peng, ZHU Ming, ZHANG Zhihui, LU Fengjiao. Sn behavior over Si3N4/2024Al composite surface in wetting test of Sn-Zn alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (7): 59-62.
    [5]LIU Mnig-zhi, ZHANG Guang-xian, Nie Li-li, Zhang Zhao-shan. Dynamic process of surface tension transformation (STT)[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (5): 60-64,80.
    [6]ZHANG Guang-xian, ZHOU Zeng-da, CHEN Ren-fu, YIN Hai, LIU Ming-zhi. Research on simulation for surface tension transformation in CO2 arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (4): 68-72.
    [7]ZHANG Guang-xian, ZOU Zeng-da, YIN Hai, LI si-hai, Li Zhong-you. Surface tension transformation in CO2 arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (1): 80-84.
    [8]WANG Xin-zhi, CHEN Wu-zhu, ZHAO Zi-xiang. Self-equalizing Transition between Electro-magnetic Force and Surface Tension in Short Circuit CO2 Welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (4): 24-28.
    [9]LEI Yong-ping, SHI Yao-wu, Hidekazu Murakawa. Infuence of Surface Tension and Alloy Vaporation on Heating Surface Temperature during Laser Welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (3): 13-16.
    [10]Meng Qingsen, Wang Bao, Lu Wenxiong. Effect of flux materials on surface tension of drops of electrodes[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1993, (2): 63-68.

Catalog

    Get Citation
    PDF
    XML
    Article views (258) PDF downloads (56) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return