Advanced Search
CAI Jianpeng, HE Jing, ZHANG Yanjie, DENG Dean. Study on welding residual stress and distortion of Q345/SUS304 dissimilar steel butt weld[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(1): 71-75.
Citation: CAI Jianpeng, HE Jing, ZHANG Yanjie, DENG Dean. Study on welding residual stress and distortion of Q345/SUS304 dissimilar steel butt weld[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(1): 71-75.
shu

Study on welding residual stress and distortion of Q345/SUS304 dissimilar steel butt weld

  • 1.

    College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China

  • 2.

    College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China;Chongqing ChangZheng Heavy industry Co., Ltd., Chongqing 400083, China

  • 3.

    1. College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China

More Information
  • Received Date: April 06, 2014
    Graphical Abstract
    • Abstract
  • Based on ABAQUS software, a computational approach was developed to simulate the welding temperature field, the residual stress distribution and the deformation of Q345/SUS304 dissimilar steel multi-pass welding joint with a thickness of 10 mm. Meanwhile, experiments were carried out to measure welding residual stresses, transverse shrinkage and angular distortion of the butt weld. Through comparing the simulated results with the measured data, it was found that both residual stresses and deformation predicted by the numerical model were in good agreement with the experimental measurements. The simulation results show that the longitudinal residual stress distribution is discontinuous near the fusion line between Q345 and weld metal, and the longitudinal stresses next to the fusion line in the Q345 steel side are significantly lower than those in the both sides of this region. Also, another interesting phenomenon is that the region with high tensile stress in SUS304 side is wider than that in Q345 side. In addition, both the simulation results and the experiment measurement indicated that a relatively large angular distortion was produced in the joint after welding.
    • FullText(HTML)
    • References (8)
  • Ueda Y, Murakawa H, Ma N. Welding deformation and residual stress prevention[M]. New York: Elsevier, 2012.
    杨厚君, 章应霖, 曹 晟, 等. 异种钢焊接接头碳迁移试验现象的分析[J]. 焊接学报, 2001, 22(2): 89-92. Yang Houjun, Zhang Yinglin, Cao Sheng, et al. Experimental phenomena of carbon migration in dissimilar metal weldments[J]. Transactions of the China Welding Institution, 2001, 22(2): 89-92.
    史春元, 李小刚, 于启湛, 等. 异种钢焊接接头加热后碳迁移区力学性能的变化规律[J]. 焊接学报, 2000, 21(3): 59-61. Shi Chunyuan, Li Xiaogang, Yu Qizhan, et al. Mechanical properties of carbon migration zone of dissimilar steel welded joints after heating[J]. Transactions of the China Welding Institution, 2000, 21(3): 59-61.
    黄明亮, 王 来, 亚生江, 等. 异质焊头Cr5Mo/Cr21Ni12碳扩散的研究[J]. 金属学报, 2000, 36(9): 902-906. Huang Mingliang, Wang Lai, Ya Shengjiang, et al. Study on carbon diffusion in Cr5Mo/Cr21Ni12 dissimilar metal welds[J]. Acta Metallurgica Sinica, 2000, 36(9): 902-906.
    Deng D, Murakawa H. Numerical simulation of temperature filed and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements[J]. Computational Materials Science, 2006, 37: 269-277.
    叶延洪, 孙加民, 蔡建鹏, 等. 焊缝屈服强度对SM490A钢焊缝残余应力预测精度的影响[J]. 焊接学报, 2015, 36(7): 17-20. Ye Yanhong, Sun Jiamin, Cai Jianpeng, et al. Influence of yield strength of weld metal on prediction accuracy of welding residual stress in SM490A steel joint[J]. Transactions of the China Welding Institution, 2015, 36(7): 17-20.
    邓德安, 梁 伟, 罗 宇, 等. 采用热弹塑性有限元方法预测低碳钢钢管焊接变形[J]. 焊接学报, 2006, 27(1): 76-80. Deng Dean, Liang Wei, Luo Yu, et al. Prediction of welding distortion in a mild steel pipe by means of thermal-elastic-plastic finite element method[J]. Transactions of the China Welding Institution, 2006, 27(1): 76-80.
    Deng D. Influence of deposition sequence on welding residual stress and deformation in an austenitic stainless steel J-groove welded joint[J]. Materials and Design, 2013, 49: 1022-1033.
    • Related Articles

  • Related Articles

    [1]CAI Jiasi, WANG Wen, GAO Jianxin, JIN Hongxi, WEI Yanhong. Effect of oscillating laser welding parameters on energy distribution and joint forming of 5A06 thick plate aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2025, 46(1): 48-58. DOI: 10.12073/j.hjxb.20231105001
    [2]YAO Liangzhen, YIN Yisheng, ZHANG Chengrui, ZHOU Litao, LIU Riliang. Optimization of laser welding quality at corners based on power tracking control[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(5): 102-108. DOI: 10.12073/j.hjxb.20220519001
    [3]SHEN Chunlong, ZHANG Meiping, ZHOU Qi, XU Jianhua, WANG Kehong. 3D transient simulation and computation for electron beam energy density spatial distribution[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (9): 1-4.
    [4]CHEN Guoqing, ZHANG Binggang, WU Zhenzhou, LIU Chenglai. Microstructure and mechanical properties of electron beam welded dissimilar TiAl/Ti60 joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (12): 41-44.
    [5]ZHANG Binggang, CHEN Guoqing, GUO Dongjie, LIU Chenglai. Electron beam welding of dissimilar high temperature titanium alloy Ti55 and Ti60[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (12): 5-8.
    [6]YANG Xiaohong, SONG Yonglun, HU Kunping, XIA Yuan. Characteristic of energy distribution at anode and cathode on AC TIG welding arc[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (11): 29-32.
    [7]YAO Wei, GONG Shui-li, CHEN Li. Effect of energy parameters on weld shaping for hybrid laser plasma welding of titanium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (9): 81-84.
    [8]QIN Guo-liang, LIN Shang-yang. Laser welding volume energy and its influence on weld penetration in laser deep penetration welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (7): 74-76.
    [9]WANG Hou-xiao, SUN Jun-sheng, WEI Yan-hong, ZHENG Yuan-yuan. Solution and application of energy distribution models based on point heat sources during gas metal arc welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (5): 27-30,34.
    [10]WANG Zhi-yong, CHEN Kai, ZUO Tie-chuan. Influence of High-oiwer CO2 Laser Beams' Transverse Intensity Distribution on Laser Welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (3): 17-19.

Catalog

    Get Citation
    PDF
    XML
    Article views (1005) PDF downloads (624) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return