Advanced Search

column
Droplet transfer behavior and alternating magnetic field controlled experimental study of high efficiency MAG welding
FAN Ding, ZHENG Falei, XIAO Lei, CHEN Kexuan
2019, 40(5): 1-5. DOI: 10.12073/j.hjxb.2019400118
[Abstract] [PDF]
Microstructural features of underwater wet friction taper plug welded joints for X52 pipeline steel
XIONG Junzhen, YANG Xinqi, LIN Wei, LIU Kaixuan
2019, 40(5): 6-12. DOI: 10.12073/j.hjxb.2019400119
[Abstract] [PDF]
7A52 aluminum alloy VPPA-MIG hybrid welding residual stress testing based on elastic modulus variation
GAN Shiming, HAN Yongquan, CHEN Furong, LI Xiaofei
2019, 40(5): 13-17,23. DOI: 10.12073/j.hjxb.2019400120
[Abstract] [PDF]
Research on image fusion method of visible and near infrared weld pool
FANG Jimi, WANG Kehong, HUANG Yong
2019, 40(5): 18-23. DOI: 10.12073/j.hjxb.2019400121
[Abstract] [PDF]
Effect of welding speed on mechanical properties of bobbin tool friction stir welded 6005A-T6 aluminum alloy joints
JI Hua, DENG Yunlai, DENG Jianfeng, XU Hongyong, LIN Sen
2019, 40(5): 24-29. DOI: 10.12073/j.hjxb.2019400122
[Abstract] [PDF]
Influence of pin tool offset on the unconsumed interface and mechanical properties of the self-reacting friction stir welded joints
HAO Yunfei, BI Huangsheng, DAN Ting, HAO Zhibin, WANG Guoqing
2019, 40(5): 30-35. DOI: 10.12073/j.hjxb.2019400123
[Abstract] [PDF]
Evolution of microstructure and impact property in welding HAZ of TiNb steel
FU Kuijun, GAO Mingze, LENG Xuesong, YAN Junchun, TANG Haoyang
2019, 40(5): 36-41. DOI: 10.12073/j.hjxb.2019400124
[Abstract] [PDF]
Off-line programming technology for arc additive manufacturing of thin-walled components with complex structures
WANG Tianqi, LI Tianxu, LI Liangyu, YANG Zhuang
2019, 40(5): 42-47. DOI: 10.12073/j.hjxb.2019400125
[Abstract] [PDF]
Numerical simulations of 3D residual stresses on inclined cruciform welded joints
WEI Xing, LIU Maokun, XIAO Lin, ZHAO Junming
2019, 40(5): 48-53,78. DOI: 10.12073/j.hjxb.2019400126
[Abstract] [PDF]
Fracture behavior analysis of inclusions in large forgings of SA508.Gr3 low alloy steel
WU Yidang, ZHANG Bin, YANG Zhipeng, QIAO Mu, ZHANG Maolong
2019, 40(5): 54-59. DOI: 10.12073/j.hjxb.2019400127
[Abstract] [PDF]
Microstructures and properties of fiber laser-MIG hybrid welded joints for marine corrosion resistant steel DH36
GAO Yan, CUI Li, CHANG Yaoqing, GU Changshi, HE Dingyong
2019, 40(5): 60-66. DOI: 10.12073/j.hjxb.2019400128
[Abstract] [PDF]
Discharge mechanism of electro-spark deposition with rotary electrode
HAN Hongbiao, GUO Jingdi, JIAO Wenqing
2019, 40(5): 67-72. DOI: 10.12073/j.hjxb.2019400129
[Abstract] [PDF]
Effect of welding current on welding quality of M51/B318 dissimilar metal joint using resistance welding
LI Yuanbo, WU Decheng, LIU Guoyue, JIA Yuzhen, GUO Songming
2019, 40(5): 73-78. DOI: 10.12073/j.hjxb.2019400130
[Abstract] [PDF]
Effect of solidification condition and strain rate on tensile properties and fracture behavior of Sn-58Bi solder
YAN Lijing, ZHOU Minbo, ZHAO Xingfei
2019, 40(5): 79-83. DOI: 10.12073/j.hjxb.2019400131
[Abstract] [PDF]
Characterization and formation mechanisms of continuous porosities-like cracks in the heat-affected zone
YU Zhaohui, YAN Hongge, YAN Junhui, WEN Zhong, LI Wei
2019, 40(5): 84-88. DOI: 10.12073/j.hjxb.2019400132
[Abstract] [PDF]
Influence of gap on droplet transition of GMAW vertical welding and characteristics of temperature field
WANG Ziran, ZHANG Shanbao, YANG Zhanli, YANG Yicheng
2019, 40(5): 89-94. DOI: 10.12073/j.hjxb.2019400133
[Abstract] [PDF]
Characteristic analysis of copper/steel composite joint bypass-current wire-heating PAW on additive manufacturing
MIAO Yugang, LI Chunwang, ZHAO Huihui, ZOU Junpan, ZHANG Peng
2019, 40(5): 95-99. DOI: 10.12073/j.hjxb.2019400134
[Abstract] [PDF]
Forming accuracy and properties of wire arc additive manufacturing of 316L components using CMT process
WANG Xiaoguang, LIU Fencheng, FANG Ping, WU Shifeng
2019, 40(5): 100-106. DOI: 10.12073/j.hjxb.2019400135
[Abstract] [PDF]
Numerical simulation analysis of crack propagation in weld toe considering aspect ratio
YU Xi, WEI Guoqian, LI Shanshan, CHEN Siwen
2019, 40(5): 107-112,125. DOI: 10.12073/j.hjxb.2019400136
[Abstract] [PDF]
Properties and microstructure of 45 steel surface processed by electron beam micro melting polishing
WANG Rong, WANG You, CUI Yue, LI Sheng
2019, 40(5): 113-119. DOI: 10.12073/j.hjxb.2019400137
[Abstract] [PDF]
Numerical simulation of heat transfer and fluid flow for arc plasma in gas tungsten arc welding
LIU Zhengjun, LI Yuhang, SU Yunhai
2019, 40(5): 120-125. DOI: 10.12073/j.hjxb.2019400138
[Abstract] [PDF]
Effect of modulating frequency in changing pulse numbers on aluminum alloy double pulsed welding
WU Wei, XUE Jiaxiang, JIN Li, ZHANG Zhanhui
2019, 40(5): 126-130. DOI: 10.12073/j.hjxb.2019400139
[Abstract] [PDF]
Study of microstructure and properties of TP304/SS400 dissimilar welding joints under three processes
WANG Haiyan, NIU Chunju, CUI Guotao, ZHAI Haizhou
2019, 40(5): 131-136. DOI: 10.12073/j.hjxb.2019400140
[Abstract] [PDF]
Study on brass and 304 stainless steel packaging process by resistance soldering
SUN Zhichao, SANG Jian, SUI Yingjie, WANG Bo, ZHANG Hongtao
2019, 40(5): 137-142. DOI: 10.12073/j.hjxb.2019400141
[Abstract] [PDF]
Investigation on mechanical properties of friction plug welded joints for 2219 friction stir welds
SUN Zhuanping, YANG Xingqi, DU Bo, LIU Kaixuan, SONG Jianling
2019, 40(5): 143-147. DOI: 10.12073/j.hjxb.2019400142
[Abstract] [PDF]
Analysis on high temperature properties of TiAl alloy joints brazd with a Ti-based filler
LI Zhifeng, LI Xiaoqiang, LI Li, LOU Li, QU Shengguan
2019, 40(5): 148-153. DOI: 10.12073/j.hjxb.2019400143
[Abstract] [PDF]
Effect of alloy element on mechanical and corrosion resistance properties of weathering steel deposited metal
ZHANG Xiazhou, GAO Lijun, YAO Zhongcheng, ZHANG Xi
2019, 40(5): 154-160. DOI: 10.12073/j.hjxb.2019400144
[Abstract] [PDF]