Advanced Search
HAN Hongbiao, GUO Jingdi, JIAO Wenqing. Discharge mechanism of electro-spark deposition with rotary electrode[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(5): 67-72. DOI: 10.12073/j.hjxb.2019400129
Citation: HAN Hongbiao, GUO Jingdi, JIAO Wenqing. Discharge mechanism of electro-spark deposition with rotary electrode[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(5): 67-72. DOI: 10.12073/j.hjxb.2019400129
shu

Discharge mechanism of electro-spark deposition with rotary electrode

  • Henan University of Science and Technology, Luoyang 471003, China

More Information
  • Received Date: September 13, 2017
    Graphical Abstract
    • Abstract
  • Single point gap discharge, single point contact discharge and continuous discharge with rotary electrode tests were conducted in order to study the discharge mechanism of electro-spark deposition with rotary electrode. The voltage and current waveform between the electrode and substrate in discharge process were collected and analyzed. The results show that the medium between electrode and substrate can be broken down and result in gap discharge under certain voltage and gap conditions. Contact discharge mainly consists of two stages: short circuit discharge and gap discharge. The contact state between electrode and substrate is complicated and variable in the process of electro-spark deposition with rotary electrode. During the discharge process, there exists not only non-contact discharge phenomena, but contact discharge and short circuit discharge phenomena. Most of them are contact discharge phenomena.
    • FullText(HTML)
    • References (14)
  • Staia M H, Fragiel A, Cruz M, et al. Characterization and wear behavior of pulsed electrode surfacing coatings[J]. Wear, 2001, 251(1):1051-1060.
    Hong X, Tan Y, Wang X, et al. Effects of nitrogen flux on microstructure and tribological properties of in-situ TiN coatings deposited on TC11 titanium alloy by electrospark deposition[J]. Transactions of Nonferrous Metals Society of China, 2015, 25(10):3329-3338.
    吴公一,张占领,孙凯伟,等. TA2表面电火花沉积Zr/WC复合涂层特性及界面行为研究[J].表面技术, 2016, 45(1):96-100 Wu Gongyi, Zhang Zhanling, Sun Kaiwei, et al. Coating characters and interface behavior between TA2 and Zr/WC coating produced by electro-spark deposition[J]. Surface Technology, 2016, 45(1):96-100
    韩红彪,李向阳.电容充放电脉冲数字控制型电火花沉积电源[J].焊接学报, 2014, 35(3):23-26 Han Hongbiao, Li Xiangyang. Digital control of capacitance charge-discharge pulse in electro-spark deposition power supply[J]. Transactions of the China Welding Institution, 2014, 35(3):23-26
    Burkov A A, Pyachin S A. Formation of WC-Co coating by a novel technique of electrospark granules deposition[J]. Materials&Design, 2015, 80:109-115.
    张留伟,邵俊.电火花沉积技术研究现状及发展趋势[J].装备制造技术, 2017(8):76-79 Zhang Liuwei, Shao Jun. Research status and development trend of electro-spark surface deposition technology[J]. Equipment Manufacturing Technology, 2017(8):76-79
    Jin Guo, Lu Bingwen, Hou Dingding, et al. Influence of rare earths addition on residual stress of Fe-based coating prepared by brush plating technology[J]. Journal of Rare Earths, 2016, 34(3):336-340.
    方瑞.超声冲击复合电火花处理改善材料性能的研究[D].天津:天津大学, 2015.
    Zhang Fuju, Ma Liqing, Zhang Guodong, et al. Interface behavior and microstructure transformation of welded joint of 35CrMo steel by electro-spark deposition[J]. China Welding, 2005, 14(1):15-18.
    Alexander V R, Orhan S. The use of bipolar current pulses in electrospark alloying of metal[J]. Surface and Coatings Technology, 2003(168):129-135.
    彭子龙,方东,刘永红,等.微细放电沉积金属微结构增材制造工艺及装备[J].电焊机, 2015, 45(10):73-76 Peng Zilong, Fang Dong, Liu Yonghong, et al. Process and equipments design of micro metal structure additive manufacturing by micro electrical discharge deposition[J]. Electric Welding Machine, 2015, 45(10):73-76
    Tang S K. The process fundamentals and parameters of electro-spark deposition[D]. Ontario, Canada:University of Waterloo, 2009.
    何鹏,吴承东,钱乙余,等.钛合金表面电火花沉积WC电极的粘连行为分析[J].焊接学报, 2006, 27(4):25-28 He Peng, Wu Chengdong, Qian Yiyu, et al. Adhesion behavior of WC coating deposited on titanium alloy by electrospark deposition[J]. Transactions of the China Welding Institution, 2006, 27(4):25-28
    刘晋春.特种加工[M].北京:机械工业出版社, 1987.
    • Related Articles

Catalog

    Get Citation
    PDF
    XML
    Article views PDF downloads Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return