Advanced Search

column
Micro weld detection based on magneto-optical lmaging and wavelet multi-scale fusion
GAO Xiangdong, HUANG Guanxiong, XIAO Zhenlin, CHEN Xiaohui
2016, 37(4): 1-4.
[Abstract] [PDF]
Notch stress concepts for fatigue assessment of welded portal crane rail structure
WANG Dongpo, CAO Shu, DENG Caiyan
2016, 37(4): 5-8.
[Abstract] [PDF]
High power supply optimization design based on BP neural network and genetic algorithm
ZHOU Jianping, XU Yan, CAO Jiong, YIN Yiliang, XU Yihao
2016, 37(4): 9-13.
[Abstract] [PDF]
Study on fatigue performance of stainless steel non-penetration laser lap welding of SUS301L stainless steel body
ZHU Guoren, CHEN Song, LI Mengmeng
2016, 37(4): 14-18.
[Abstract] [PDF]
Effect of process parameters on mechanical properties of friction stir welded 2195 Al-Li alloy joints
ZHANG Hua, QIN Hailong, WU Huiqiang
2016, 37(4): 19-23.
[Abstract] [PDF]
Study on CMT welding-brazing joint microstructure of 7A52 Al alloy-steel stud and influence of Ni coating
GE Jiaqi, WANG Kehong, ZHOU Qi, ZHANG Deku
2016, 37(4): 24-28.
[Abstract] [PDF]
Numerical simulation of deep-penetration laser welding based on level-set method
ZHANG Yi, LIU Xixia, SHI Rukun, WANG Xia, YANG Xiong
2016, 37(4): 29-34.
[Abstract] [PDF]
Strength evaluation and prediction of TiAl and 40Cr diffusion bonding joint
LUAN Yilin, GANG Tie, ZHANG Chi
2016, 37(4): 35-38.
[Abstract] [PDF]
Simulation of material flow behavior during refill friction stir spot welding process
JI Shude, ZHUO Bin, MA Lin, CHAI Peng, ZHANG Liguo, LI Zhengwei
2016, 37(4): 39-42.
[Abstract] [PDF]
Evaluation of local strength of welding joint by using double holes micro shear test
CAI Shujuan, ZHU Liang, ZHANG Zhongfa
2016, 37(4): 43-46.
[Abstract] [PDF]
Joining of SiO2f/SiO2 composite to Nb using Ag-Cu-In-Ti brazing filler
CHEN Bo, WU Shibiao, XIONG Huaping, LI Wenwen
2016, 37(4): 47-51.
[Abstract] [PDF]
Impact of external magnetic field generated by permanent magnet on mechanical property and microstructure of aluminum alloy resistance spot weld
YAO Qi, LI Yang, LUO Zhen, ZHANG Yu
2016, 37(4): 52-56.
[Abstract] [PDF]
Effect of hydrogenation on uniformity of superplastic deformation of titanium alloy laser weld
FAN Zhao, CHENG Donghai, CHEN Yiping, HU Dean
2016, 37(4): 57-60.
[Abstract] [PDF]
Critical width of tensile-shear test specimen for resistance spot welding joints
CUI Xuetuan, ZHAO Yujin, LUO Zhen, YAN Fuyu, AO Sansan, LUO Tong
2016, 37(4): 61-64.
[Abstract] [PDF]
Analysis process of plasma arc melting brazing lap joint of dissimilar materials of aluminum and copper
PENG Chi, CHENG Donghai, CHEN Yiping, HU Dean
2016, 37(4): 65-68.
[Abstract] [PDF]
Study on welding residual stress and distortion in Q345/SUS304 dissimilar steel butt weld of V and K groove type
CAI Jianpeng, DENG Dean, JIANG Xiaohua, ZHANG Yanjie
2016, 37(4): 69-72.
[Abstract] [PDF]
Novel antifriction and wear-resistant composite coating with self-sensing detection and its luminescent properties
LI Wensheng, ZHANG Mina, HE Ling, YANG Xiaotian, WU Xuejun
2016, 37(4): 73-76.
[Abstract] [PDF]
Numerical simulation analysis on T-shaped pipe weldments temperature and stress-strain field based on SYSWELD
LI Zhizhong, ZHOU Jianping, XU Yan, LI Bingru
2016, 37(4): 77-80,94.
[Abstract] [PDF]
Effect of joint type on mechanical properties of three-sheet 6061 aluminum alloy resistance spot welds
YAN Fuyu, LI Yang, LUO Zhen, ZHAO Yujin, CUI Xuetuan, LUO Tong
2016, 37(4): 81-84.
[Abstract] [PDF]
Numerical simulation and experimental verification of resistance spot welding with DP780 dual-phase steel
SUN Xiaoyu, HUANG Lei, WANG Wurong, WEI Xicheng
2016, 37(4): 85-88.
[Abstract] [PDF]
Numerical simulation analysis of welding residual stresses in spherical tank
WAN Jin, LI Jia, LIN Shaoxiong
2016, 37(4): 89-94.
[Abstract] [PDF]
Control of deformation for fatigue crack repair in combustion chamber case shell on aeroengine
GAO Shuangsheng, QU Shen, YANG Shuo, LI Xiaoguang, LU Shanping, LI ying, ZHOU Guannan
2016, 37(4): 95-97,123.
[Abstract] [PDF]
Pinless friction stir lap welding of AA2024 alloy sheet: joint formability and property
JIANG Ruorong, LI Wenya, YANG Xiawei, GAO Dalu
2016, 37(4): 98-102.
[Abstract] [PDF]
Numerical analysis of microstructure evolution of coarse grained zone in sidewall during narrow gap submerged arc welding
ZHANG Lei, LIU Changqing, YU Jingwei, HU Xihai, GONG Feng, JIN Guangri
2016, 37(4): 103-106.
[Abstract] [PDF]
Process and mechanism of friction stir spot welding between ABS plastic and 6082 aluminum alloy
WANG Xijing, WANG Xiaolong, ZHANG Zhongke, DENG Xiangbin
2016, 37(4): 107-110.
[Abstract] [PDF]
Structure and mechanical property of DD6/FGH96 linear friction welding joint
JI Yajuan, ZHANG Tiancang, GUO Delun, LI Ju
2016, 37(4): 111-114.
[Abstract] [PDF]
Numerical simulation of keyhole evolution for 2219 aluminum alloy electron beam spot welding process
LIU Chengcai, LIU Chengdan, LIU Weiwei, HE Jingshan
2016, 37(4): 115-118.
[Abstract] [PDF]
Effect of phase difference on arc stability and weld quality of tandem P-GMAW
CHEN Dongsheng, CHEN Maoai, WU Chuansong
2016, 37(4): 119-123.
[Abstract] [PDF]
Microstructure of TIG welded joint of marine titanium alloy
GAO Fuyang, LIAO Zhiqian, XIONG Jinhui, LI Shikai
2016, 37(4): 124-128.
[Abstract] [PDF]
Abstracts
2016, 37(4): 129-134.
[Abstract] [PDF]

Email alert

RSS