Advanced Search

column
Microstructure numerical simulation of weld pool in rapid solidification
ZHANG Min, WANG Qiang, LI Jihong, LI Lin, ZHI Jinhua, LUO Hailong
2013(7): 1-4,28.
[Abstract] [PDF]
A real-time wavelet de-noising method of magnetism-control arc seam tracking signal
HONG Bo, YANG Xuedao, HE Rongtuo, XIANG Xiaoming
2013(7): 5-8.
[Abstract] [PDF]
Formation mechanism and microstructure of Cf/Al and TiAl joint by SHS joining with Al-Ni-CuO interlayer
LI Zhuoran, FENG Guangjie, XU Kai, ZHANG Xianglong
2013(7): 9-12.
[Abstract] [PDF]
Interfacial microstructure and properties of TiAl joints brazed with composite filler reinforced by particles
SONG Xiaoguo, CAO Jian, CHEN Haiyan, SI Guodong, FENG Jicai
2013(7): 13-16.
[Abstract] [PDF]
Effect of Si on microstructure and properties of Fe-Cr-C-B self-shielded open arc hardfacing alloys
GONG Jianxun, DING Fen, TANG Tianshun, XIAO Yifeng
2013(7): 17-20.
[Abstract] [PDF]
Microstructure and mechanical properties of laser multi-layer deposition of Ti-6Al-3Mo alloy
ZHANG Fengying, LIANG Guangsheng, ZHANG Jian, CHEN Hong
2013(7): 21-24.
[Abstract] [PDF]
Discharge during microarc oxidation process on Mg-7Li alloy and its corrosion resistance
LI Jungang, LÜ Ying, LI Muqin, WANG Hongwei, ZHU Zhaojun, WEI Zunjie, MENG Xiangcai
2013(7): 25-28.
[Abstract] [PDF]
Intelligent decision of welding quality classification based on rough set
TAO Liang, SUN Tongjing, DUAN Bin, ZHANG Guangxian
2013(7): 29-32.
[Abstract] [PDF]
Numerical simulation of temperature field during scanning electron beam welding of TC4 titanium alloy
CHEN Binbin, PANG Shengyong, ZHOU Jianxin, SUO Hongbo, CHEN Zheyuan, GONG Shuili
2013(7): 33-37.
[Abstract] [PDF]
Microstructure and properties of WC-17% Co coating by cold spraying deposition with carbide powder at different scales
CHEN Xiao, WANG Hongtao, JI Gangchang, BAI Xiaobo, DONG Zengxiang, YANG Fenggen
2013(7): 38-42.
[Abstract] [PDF]
Evaluation on CO2 arc welding stability based on quantitative analysis of class frequency distribution of short-circuit time
GAO Liwen, XUE Jiaxiang, CHEN Hui, LIN Zhihui, LIANG Yongquan
2013(7): 43-46.
[Abstract] [PDF]
Fillet weld visual inspection based on coded structured light
SUN Dawei, CAI Yan, TONG Tong, WU Yixiong
2013(7): 47-50.
[Abstract] [PDF]
Heating characteristic of constricting TIG arc with insulating plate in narrow gap welding
LI Yuanbo, ZHU Liang
2013(7): 51-54.
[Abstract] [PDF]
Brazing of Cf/SiC composite to Ti alloy with (Ti-Zr-Cu-Ni)+W composite filler material
CUI Bing, HUANG Jihua, CAI Chuang, CHEN Shuhai
2013(7): 55-58.
[Abstract] [PDF]
Sn behavior over Si3N4/2024Al composite surface in wetting test of Sn-Zn alloy
SHEN Yanxu, LIN Tiesong, HE Peng, ZHU Ming, ZHANG Zhihui, LU Fengjiao
2013(7): 59-62.
[Abstract] [PDF]
Alternate arcing behavior of double-wire pulse MIG welding process with single power
DI Yong, LI Huan, YANG Lijun, GU Xiaoyan, GAO Ying
2013(7): 63-67.
[Abstract] [PDF]
Numerical simulation on creep failure of T91/HR3C heatresistant steels welded joint
ZHANG Jianqiang, ZHANG Guodong, YAO Bingyin, LI Taijiang, LIU Fuguang
2013(7): 68-72.
[Abstract] [PDF]
Microstructure and mechanical properties of SiCp/Al joints by electron beam welding
CHEN Guoqing, ZHANG Binggang, ZHEN Gongbo, HE Jun, FENG Jicai
2013(7): 73-76.
[Abstract] [PDF]
Characterization of nugget nucleation information by acoustic emission signals during resistance spot welding
LUO Yi, CHU Chenghua, LI Jinglong
2013(7): 77-80.
[Abstract] [PDF]
Effect of mechanical shaping method on fatigue property of aluminium alloy welded joint
YAN Zhongjie, FANG Hongyuan, LIU Xuesong, WANG Shuaili
2013(7): 81-84.
[Abstract] [PDF]
Effect of welding ways on microstructure and mechanical properties of 6082 aluminum alloy
DONG Jihong, NIE Xusheng, YAN Jiangwu, DONG Chunlin, LUAN Guohong
2013(7): 85-88.
[Abstract] [PDF]
Comparative analysis of residual stress of main components of hydraulic support
ZHANG Yiliang, CUI Shuanwei, LI Xiaoyan
2013(7): 89-92.
[Abstract] [PDF]
Curvature scale space-based boundary points detection of weld seam of tailored blanks laser welding
ZHANG Wanjiang, XU Min
2013(7): 93-96.
[Abstract] [PDF]
Effects of shoulder plug depth on joining performance of AA2024/AA2024 friction stir welded joints
ZHAO Lei, ZHANG Tiancang, LI Xiaohong, SUN Chengbin
2013(7): 97-100.
[Abstract] [PDF]
Effects of shielding gas composition on microstructure and toughness of 440 MPa HSLA steel weld metals with gas metal arc welding
XIAO Xiaoming, PENG Yun, MA Chengyong, TIAN Zhiling
2013(7): 101-104.
[Abstract] [PDF]
Three dimensional model for heat transfer and plastic flow of friction stir welding
FENG Tiantao, ZHANG Xiaohui
2013(7): 105-108.
[Abstract] [PDF]
Analysis of stress concentration factors of overlap joints based on finite element method
FU Lei, CHENG Ronglong, YANG Jianguo, WANG Tao, FANG Hongyuan
2013(7): 109-112.
[Abstract] [PDF]

Email alert

RSS