Advanced Search
BAI Jiuyang, WANG Jihui, LIN Sanbao, YANG Chunli. Width prediction of aluminium alloy weld additively manufactured by TIG arc[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(9): 87-90.
Citation: BAI Jiuyang, WANG Jihui, LIN Sanbao, YANG Chunli. Width prediction of aluminium alloy weld additively manufactured by TIG arc[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(9): 87-90.
shu

Width prediction of aluminium alloy weld additively manufactured by TIG arc

  • State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China

More Information
  • Received Date: March 30, 2015
    Graphical Abstract
    • Abstract
  • Four multi-layer single aluminum alloy beads using the same welding parameters were formed on substrates with four kinds of thickness by TIG arc. It is found that deposited metal width in stable region of different samples was basically unchanged. Based on this phenomenon, the experimental samples were designed using quadratic general rotary unitized design method and the model between process parameters (welding current, welding speed, wire feed speed and inter-layer temperature) and deposited metal width of stable region was established. The validation results show that the model has good prediction accuracy. Furthermore, it also reveals that the welding current, welding speed and inter-layer temperature were the main influential factors on deposited metal width. Among them, the welding current had the most influential effect, and then the welding speed and inter-layer temperature, successively. In addition, the welding speed and inter-layer temperature had interactive effects on deposited metal width.
    • FullText(HTML)
    • References (8)
  • 刘一搏, 孙清洁, 姜云禄, 等. 基于冷金属过渡技术快速成形工艺[J]. 焊接学报, 2014, 35(7): 1-4. Liu Yibao, Sun Qingjie, Jiang Yunlu, et al. Rapid prototyping process based on cold metal transfer arc welding technology[J]. Transactions of the China Welding Institution, 2014, 35(7): 1-4.
    李玉龙, 张 华, 张光云, 等. 基于TIG堆焊技术的低碳钢零件精密快速成形[J]. 焊接学报, 2009, 30(9): 37-40. Li Yulong, Zhang hua, Zhang Guanyun, et al. Precision rapid prototyping of steel parts using TIG deposition technology[J]. Transactions of the China Welding Institution, 2009, 30(9): 37-40.
    刘 宁. TC4钛合金TIG填丝堆焊成型技术研究[D]. 哈尔滨工业大学, 2013.
    陈天佐, 李泽高. 金属堆焊技术[M]. 北京: 机械工业出版社, 1991.
    张光云. TIG熔焊成型中焊缝几何尺寸的建模与控制[D]. 南昌大学, 2008.
    胡建文. GMAW快速成形熔敷焊道尺寸神经网络建模和参数预测[D]. 哈尔滨工业大学, 2012.
    申俊琦, 胡绳荪, 刘望兰, 等. 铝合金焊接快速成形层间间隔时间分析[J]. 焊接学报, 2008, 29(5): 109-112. Shen Junqi, Hu Shengsun, Liu Wanglan, et al. Effect of time interval in rapid prototyping of Al-alloy based on welding[J]. Transactions of the China Welding Institution, 2008, 29(5): 109-112.
    袁志发, 周静芋. 试验设计分析[M]. 北京;高等教育出版社, 2000.
    • Related Articles

  • Related Articles

    [1]HE Zhaoguo, ZHOU Dianwu, DENG Qiao, YANG Jiahao, WANG Xinyu. Influence of laser parameters on the steel/CFRP interface width and its predictive modeling[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2025, 46(2): 36-45. DOI: 10.12073/j.hjxb.20240901002
    [2]YAO Ping, LI Wenqiang, CHEN Wei, HE Riheng, ZHANG Peimei, ZHANG Guangchao. Prediction of weld size prediction based on Whale Optimization Algorithm[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(11): 133-139. DOI: 10.12073/j.hjxb.20240701001
    [3]WANG Tianqi, YANG Zhuang, LI Liangyu, HE Junjie. Research on forming and welding technology of thick wall structure arc added material manufacturing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(12): 78-82. DOI: 10.12073/j.hjxb.2019400317
    [4]YANG Zhuang, WANG Tianqi, LI Liangyu, LI Tianxu. Forming method and technology of arc additive manufacturing for thick wall structural parts[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(10): 100-105. DOI: 10.12073/j.hjxb.2019400270
    [5]ZHANG Zhaodong, ZENG Qingwen, LIU Liming, SUN Chengshuai. Forming regularity of aluminum alloy formed by laser induced MIG arc additive manufacturing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(8): 7-12. DOI: 10.12073/j.hjxb.2019400201
    [6]CHEN Ziqin, GAO Xiangdong, WANG Yu, YOU Deyong. Weldment back of weld width prediction based on neural network during high-power laser welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(11): 48-52. DOI: 10.12073/j.hjxb.2018390271
    [7]WANG Teng, GAO Xiangdong. Prediction algorithm of molten pool width based on support vector machine during high-power disk laser welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (5): 25-28.
    [8]XU Fujia, LÜ Yaohui, LIU Yuxin, XU Binshi, HE Peng. Prediction model of bead geometry shaped by rapid prototyping based on pulsed PAW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (1): 49-52.
    [9]SHEN Junqi, HU Shengsun, FENG Shengqiang, GAO Zhonglin. Bead geometry prediction based on SVM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (2): 103-106.
    [10]YU Xiu-ping, SUN Hua, ZHAO Xi-ren, Alexandre Gavrilov. Weld width prediction based on artificial neural network[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (5): 17-19,45.

  • Cited by

    Periodical cited type(58)

    1. 刘景城，叶晗哲，徐贵峰，娄昊，耿海滨. 不同基板热沉的铝合金电弧增材控形. 福州大学学报(自然科学版). 2024(01): 91-97 .
    2. 王鑫，赵津嫚，王倩，武佳璇，周子烨. 工艺参数对电弧增材制造工件的影响. 河北冶金. 2024(02): 32-38 .
    3. 谢煜捷，陈建平，贾晓丽，李黄石，康中进. 铝合金电弧增材制造研究现状与发展趋势. 轻工科技. 2024(05): 61-65 .
    4. 程圣，刘正勇，熊俊，王天石，陈帅. 薄壁构件GMA增材制造成形特性与尺寸预测. 电焊机. 2024(08): 71-77+101 .
    5. 姚屏，李文强，陈威，何日恒，张佩美，张广潮. 基于鲸鱼优化算法的焊缝尺寸预测. 焊接学报. 2024(11): 133-139 . 本站查看
    6. 王磊磊，吕飞阅，高转妮，虞文军，高川云，占小红. 电弧增材制造2319铝合金交叉桁条结构微观组织与拉伸性能研究. 机械工程学报. 2023(01): 267-277 .
    7. 余其芳，成雨萱，韦有翔，陈靖东，郝智远，敖三三. 电弧增材制造过程形性调控方法及在线质量监测技术研究进展. 焊接技术. 2023(03): 1-13+113 .
    8. 邢松龄，李充，周海鹏，陈高强，史清宇. 铝合金型材搅拌摩擦焊无减薄接头组织和性能. 焊接学报. 2023(11): 124-128+136 . 本站查看
    9. 姚波，马良，陈静，王振男. 电弧增材制造典型构件热应力变形仿真分析. 机械科学与技术. 2022(06): 961-970 .
    10. 任智强，孙瑜，叶瑞云. 镁合金表面激光电弧复合熔覆5556铝合金工艺研究. 热喷涂技术. 2022(03): 82-90 .
    11. 余圣甫，禹润缜，何天英，代轶励. 电弧增材制造技术及其应用的研究进展. 中国材料进展. 2021(03): 198-209 .
    12. 王轲，张元彬. ER5356铝合金双脉冲电弧增材制造成型工艺及组织研究. 热加工工艺. 2021(09): 20-23+28 .
    13. 李天旭，王天琪，李亮玉，杨壮. 典型薄壁结构件增材制造焊接路径规划优化算法. 焊接学报. 2021(02): 69-74+101-102 . 本站查看
    14. 倪加明，刘思余，李志豪，王锋华，李宝辉. 镁合金电弧熔丝增材成形质量控制研究. 热加工工艺. 2021(13): 128-132 .
    15. 李鑫磊，张广军. 电弧增材制造中空间曲面等距路径规划算法. 焊接学报. 2021(07): 14-20+98 . 本站查看
    16. 董海，高秀秀，魏铭琦. 基于ACS-DBN的电弧增材制造焊道尺寸预测. 系统仿真学报. 2021(12): 2828-2837 .
    17. 陈喆，彭勇，孔见，姜华. CMT工艺对铝合金焊道尺寸的影响. 热加工工艺. 2020(07): 128-132 .
    18. 杨光，彭晖杰，李长富，邢飞，刘祥宇，王超. 电弧增材制造5356铝合金的组织与性能研究. 稀有金属. 2020(03): 249-255 .
    19. 白涛，林健，程四华，雷永平，符寒光，葛进国. 冷金属过渡电弧增材制造H13钢块体的显微组织与力学性能. 机械工程材料. 2020(04): 67-71 .
    20. 石俊彪，赵昀，陈树君，迟杏. Tandem-GMAW电弧增材制造基层成型宽度研究及热过程分析. 天津大学学报(自然科学与工程技术版). 2020(09): 910-916 .
    21. 赵东升，孔乐乐，缪唐军，刘玉君. 船用铝合金电弧增材制造实验. 实验室科学. 2020(02): 23-26 .
    22. 段宣政，赵菲，王淑丹，赵广辉，吴志生. 国内外金属3D打印材料现状与发展. 焊接. 2020(02): 49-55+68 .
    23. 林泓延，黄舒薇，姚屏，王晓军. 工艺参数对机器人电弧增材制造成形的影响研究. 精密成形工程. 2020(04): 100-106 .
    24. 尹紫秋，熊俊. 基于ACT匹配的GMA增材制造熔池形貌三维重建. 焊接学报. 2019(01): 49-52+163 . 本站查看
    25. 罗怡，朱亮，韩静韬，许洁，张成洋. 电弧填丝增材制造过程熔滴射滴过渡特征及其对熔滴沉积成形的影响. 机械工程学报. 2019(03): 219-225 .
    26. 卢振洋，刘峰，蒋凡，陈树君，余旭，李方. 电弧热丝变极性等离子弧增材制造铝合金成型尺寸预测. 稀有金属材料与工程. 2019(02): 524-530 .
    27. 肖文磊，李志豪，马国财，赵罡. 铝合金电弧增材制造成形质量研究. 机械制造文摘(焊接分册). 2019(01): 22-26 .
    28. 焦文清，韩红彪，王磊，陈俊潮，王中豪. 高能脉冲精密冷焊的电弧特性和增材制造成形能力. 焊接. 2019(05): 27-31+66 .
    29. 王磊磊，张占辉，徐得伟，薛家祥，曾敏. 双脉冲电弧增材制造数值模拟与晶粒细化机理. 焊接学报. 2019(04): 137-140+147+167 . 本站查看
    30. 何杰，冯曰海，张林，占彬. 高强Al-Mg合金钨极氩弧双丝增材制造工艺与组织性能. 焊接学报. 2019(07): 109-113+166 . 本站查看
    31. 王天琪，李天旭，李亮玉，杨壮. 复杂结构薄壁件电弧增材制造离线编程技术. 焊接学报. 2019(05): 42-47+163 . 本站查看
    32. 杨笑宇，李言，杨明顺，赵鹏康. TIG丝材电弧增材制造铝合金薄壁件层宽层高预测. 热加工工艺. 2019(17): 134-137+141 .
    33. 张兆栋，曾庆文，刘黎明，孙承帅. 铝合金激光诱导MIG电弧增材制造成形尺寸规律. 焊接学报. 2019(08): 7-12+161 . 本站查看
    34. 任香会，王磊磊，董春林，薛家祥. 304不锈钢冷金属过渡电弧增材制造组织及力学性能. 焊接. 2019(09): 44-48+67 .
    35. 杨壮，王天琪，李亮玉，李天旭. 厚壁结构件电弧增材制造成形方法及工艺. 焊接学报. 2019(10): 100-105+165 . 本站查看
    36. Hao Zhong，Bojin Qi，Baoqiang Cong，Zewu Qi，Hongye Sun. Microstructure and Mechanical Properties of Wire + Arc Additively Manufactured 2050 Al–Li Alloy Wall Deposits. Chinese Journal of Mechanical Engineering. 2019(06): 184-190 .
    37. 林泓延，姚屏，李道良，梁道赞，周亢. 机器人电弧增材制造技术研究现状与趋势. 自动化与信息工程. 2019(06): 8-19 .
    38. 曲扬，杨可，郭博静，董浩然，雷步越，朱文杰，包晔峰，蒋永锋. 不锈钢电弧增材制造成形. 电焊机. 2018(01): 15-18+23 .
    39. 张弛，李宏杰，朱彦军，武帅，王安红. 结合焊接机器人和变位机的增材制造方法. 电焊机. 2018(04): 104-107 .
    40. 冯英超，刘金平，王世杰，孙清洁，徐鹏威，刘一搏. 固溶处理对Inconel 625合金电弧增材组织的影响. 焊接学报. 2018(06): 81-85+132 . 本站查看
    41. 张炼，张兆栋，刘黎明. 316不锈钢TIG电弧增材制造成形规律研究. 焊接技术. 2018(04): 10-14 .
    42. 苗秋玉，刘妙然，赵凯，马广义，吴东江. 铝合金增材制造技术研究进展. 激光与光电子学进展. 2018(01): 58-66 .
    43. 蒋旗，张培磊，聂云鹏. 基于RobotStudio平台的增材制造编程方法. 上海工程技术大学学报. 2018(01): 39-44 .
    44. 尹凡，王克鸿，冯曰海，罗添元. 电弧填丝增材制造的宽度尺寸建模及分析. 机械制造与自动化. 2018(03): 119-122 .
    45. 王秋雨，杨可，徐先宜，庄百亮，包晔峰，蒋永锋. 铝合金电弧增材制造成形工艺与性能研究. 电焊机. 2018(09): 76-80 .
    46. 江宏亮，姚巨坤，殷凤良. 丝材电弧增材制造技术的研究现状与应用. 热加工工艺. 2018(18): 25-29 .
    47. 邹田春，欧尧，秦嘉徐. 高强铝合金增材制造技术的研究进展. 热加工工艺. 2018(20): 34-37 .
    48. 迟大钊，马子奇，程怡，赵梓博，唐自衡. 3D打印镂空结构缺陷X射线CT检测. 焊接学报. 2018(11): 22-26+130 . 本站查看
    49. 陈森昌，张李超，迟彦惠，张平，王红云，李锋. 柔性再制造增材修复系统. 电焊机. 2017(07): 47-50 .
    50. 夏然飞，吴怀主，许晶. 复合铣削的金属件堆焊成形尺寸研究. 航空制造技术. 2017(12): 99-103+109 .
    51. 陈伟，陈玉华，毛育青. 铝合金增材制造技术研究进展. 精密成形工程. 2017(05): 214-219 .
    52. 陈树君，赵昀，肖珺，田宏宇. 铝合金电弧熔积成形机器人增材制造系统. 焊接. 2016(04): 9-12+73 .
    53. 柏久阳，范成磊，林三宝，杨春利. 基板散热作用对电弧堆焊成形中熔宽调控的影响. 焊接学报. 2016(03): 115-119+134 . 本站查看
    54. 柏久阳，范成磊，杨雨晨，徐艳利，李瑞，林三宝，王计辉. 2219铝合金TIG填丝堆焊成形薄壁试样组织特征. 焊接学报. 2016(06): 124-128+134 . 本站查看
    55. 刘志森，薛丁琪，韩绍华，邓将华，王琳，姚立纲. 基于CMT电弧增材的焊缝成形尺寸规律研究. 精密成形工程. 2016(06): 21-25 .
    56. 柏久阳，王计辉，林三宝，杨春利，范成磊. 电弧増材制造厚壁结构焊道间距计算策略. 机械工程学报. 2016(10): 97-102 .
    57. 张萍，刘德波，师建行，林三宝，刘宁. TIG增材制造TC4钛合金力学性能及工艺参数的影响规律. 焊接. 2015(10): 45-48+70 .
    58. 张萍，刘德波，柏久阳，林三宝，刘宁. 电弧增材制造的沉积态TC4钛合金薄壁零件组织特征. 焊接. 2015(11): 53-56+72 .

    Other cited types(80)

Catalog

    Get Citation
    PDF
    XML
    Article views (1097) PDF downloads (392) Cited by(138)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return