Advanced Search
ZHANG Min, ZHANG Enhua, ZHI Jinhua, MENG Qiang, ZHANG Haicun. Pitting corrosion resistance of PH stainless steel of FV520B and its welding joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (10): 37-40.
Citation: ZHANG Min, ZHANG Enhua, ZHI Jinhua, MENG Qiang, ZHANG Haicun. Pitting corrosion resistance of PH stainless steel of FV520B and its welding joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (10): 37-40.

Pitting corrosion resistance of PH stainless steel of FV520B and its welding joint

More Information
  • Received Date: August 05, 2011
  • The corrosion-resistance of the steel FV520B had been tested respectively in the HCl and H2SO4(10%) under the 35℃.The result showed that under the above condition the base metal and the welding welding joint suffered a much more serious pitting corrosion in the HCl(10%) than that in the H2SO4 of the same mass fraction, the chloridion has more serious destructive effect on the passivation film of the stainless steel, which causes the deeper corrosive pitting.while the corrosive effect of 10% mass fraction H2SO4 is relatively inferior, the corrosion products are different either, but under the different corrosive environment, all the corrosive level of the weld joint in the welding point is lower than the HAZ.
  • Related Articles

    [1]ZHANG Zhiqiang, ZHANG Yuhang, ZHANG Hongwei, MA Qiang, CHU Haoran, ZHANG Yongchun. Microstructure and corrosion resistance of UNS S32750 super duplex stainless steel laser welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(4): 14-20. DOI: 10.12073/j.hjxb.20220510003
    [2]FENG Daochen, ZHENG Wenjian, GAO Guoben, ZHOU Zhou, HE Yanming, YANG Jianguo. Corrosion resistance of AlCoCrFeNi2.1 high entropy alloy welded joint by electron beam welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(5): 43-48. DOI: 10.12073/j.hjxb.20220101006
    [3]ZHONG Yang, ZHENG Zhizhen, Li Jianjun, ZHANG Hua. Microstructure and corrosion resistance of laser-MIG 316L stainless steel under the nitrogen assistance[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(12): 7-17. DOI: 10.12073/j.hjxb.20210421005
    [4]ZHAO Wei, ZOU Yong, XIA Dianxiu, ZOU Zengda. Analysis of microstructure and corrosion resistance of X80 pipeline steel welded by shielded metal arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(10): 51-54.
    [5]ZHANG Bin, GUO Libin, CUI Hai, ZHANG Huigang. Test and analysis on corrosion resistance of MWEDM surfaces[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(11): 93-96.
    [6]LI Jungang, LÜ Ying, LI Muqin, WANG Hongwei, ZHU Zhaojun, WEI Zunjie, MENG Xiangcai. Discharge during microarc oxidation process on Mg-7Li alloy and its corrosion resistance[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (7): 25-28.
    [7]LIU Wanhui, LIU Wenbin, BAO Ailian. Improvement of corrosion resistance of friction stir welded joint of 7N01-T5 aluminum alloy by micro-arc oxidation[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (1): 29-32.
    [8]ZHANG Yong, QIN Zuoxiang, XU Hongji, LU Xing, TONG Wei. Microstructure and corrosion resistance of welding joints of economic ferritic stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (12): 18-22.
    [9]CHENG Yiyuan, WANG Yong, SHENG Yijian, CHEN Yankun, XUE Minpeng. Investigation on nitrogen distribution and corrosion resistance of 35CrMoA steel in laser quenching-nitriding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (1): 69-72,76.
    [10]KONG Xiaodong, YANG Mingbo, ZHU Meiwu. Effects of metallurgical factors on corrosion behaviors of welded joints of low-alloy steels[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (7): 105-109.

Catalog

    Article views (259) PDF downloads (87) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return