Advanced Search
YANG Ke, YU Shengfu, YANG Hua. Microstructure and high-temperature wear-resistance of nitrogen-alloying hardfacing alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (1): 5-8.
Citation: YANG Ke, YU Shengfu, YANG Hua. Microstructure and high-temperature wear-resistance of nitrogen-alloying hardfacing alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (1): 5-8.
shu

Microstructure and high-temperature wear-resistance of nitrogen-alloying hardfacing alloy

  • 1.

    College of Mechanical and Electrical Engineering, Hehai University, Changzhou, Jiangsu 213022, China;Province Key Lab of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang, Jiangsu 212003, China

  • 2.

    College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

  • 3.

    Shanghai Jihaowang Shipbuilding Technology Development Co., Ltd, Shanghai 200136, China

More Information
  • Received Date: September 18, 2009
    Graphical Abstract
    • Abstract
  • The hardfacing alloy of martensitic stainless steel added nitrogen as alloying element was made,and the microstructure and high-temperature wear-resistance was also studied.It is found that the hardfacing alloy has two main phases of martensite and carbonitrides.The high-temperature wear mechanism between hardfacing alloy of the martensitic stainless steels and the low-carbon steel was abrasive wear because the effect of oxide formation on the surface of the low-carbon steel.The oxide was sticking on the surface of hardfacing alloys and increasing the abrasive wear damage.The results showed that carbonitride particles distributed homogeneously in the hardfacing alloy and had a good strengthening effect on the hardness and high-temperature wear resistance.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]HE Qiong, WANG Honghong, WANG Yangwen, ZHANG Fuwei, LI Xiaochen. Solidification behavior and characteristics of molten pool of high manganese austenitic steel for cryogenic application[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(9): 60-66. DOI: 10.12073/j.hjxb.20221120001
    [2]CHI Dazhao, MAI Chengle, SUN Changli, GANG Tie. Wavelet package based ultrasonic defect detection method for testing austenitic stainless steel weldment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 43-46.
    [3]XU Feng, XU Jinfeng, ZHAI Qiuya. Microstructural formation of austenitic stainless steel joint by capacitor discharge welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (12): 101-104.
    [4]XUE Gang, ZHAO Fuchen, JING Yanhong, NIU Jicheng, ZHANG Yonghui, GAI Dengyu. Effect of carbon on impact toughness of metal deposited with high strength austenite electrodes[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (8): 89-92.
    [5]LI Hongmei, SUN Daqian, WANG Wenquan, XUAN Zhaozhi, REN Zhenan. Microstructure and mechanical properties of austenite stainless steel wire joints welded by laser[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 71-74.
    [6]ZHANG Tianhong, DU Yi, ZHANG Junxu. Effect of carbon and nitrogen on microstructure and properties of austenite weld metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (7): 81-84,88.
    [7]LEI A-Li, MA Xiao-Ju, FENG La-Jun. Corrosion of austenitic stainless steel welded joint in sulfur-bearing solution[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (1): 89-92.
    [8]FU Rui-dong, LI Liang-yu, ZHENG Yang-zeng. TIG Welding of High Manganese Austenitic Steel for Super Cryogenic Application[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (3): 21-24.
    [9]Meng Qingsen, Liu Mancai, Yin Sheng yi, Yao Quanfu. Middle Chromium Austenitic Alloy for Hardface Welding of Impact Wear-resitant[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1998, (4): 42-48.
    [10]Lu Wenxiong, Zhang Havqian, Wu Yu, Wang Bao. “AUSTENITE-RICH BAND” IN THE FUSION ZONE OF DISSIMILAR STEEL WELDED JOINT[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (3): 134-140.

  • Cited by

    Periodical cited type(9)

    1. 胡一杰，孙有平，何江美，李旺珍. 轴肩压入量对2524铝合金FSSW接头组织性能的影响. 兵器材料科学与工程. 2020(01): 52-56 .
    2. 胡一杰，孙有平，何江美，李旺珍. 转速对2524铝合金搅拌摩擦点焊组织与性能的影响. 矿冶工程. 2020(02): 139-143 .
    3. 邱宇，孟强，栾国红，曾元松，李志强，张豪. 喷射成形7055铝合金薄板搅拌摩擦焊研究. 塑性工程学报. 2020(07): 117-122 .
    4. 金玉花，张林，张亮亮，王希靖. 7050铝合金搅拌摩擦焊接头的微观织构演变与力学性能. 材料导报. 2020(20): 20107-20111 .
    5. 金玉花，张林，张亮亮，王希靖. 7050铝合金FSW接头微区低周疲劳裂纹扩展行为. 焊接学报. 2020(10): 11-16+97-98 . 本站查看
    6. 金玉花，吴永武，王希靖，郭廷彪. 滚动轧制对铝合金搅拌摩擦焊接头性能的影响. 焊接学报. 2019(04): 50-54+163 . 本站查看
    7. 霍仁杰，金玉花，王宁，王广山，周彦林. 自然时效对2024铝合金搅拌摩擦焊接头拉伸性能和显微硬度的影响. 热加工工艺. 2019(15): 154-157 .
    8. 李萍，张凯，王薄笑天，薛克敏. 7A60铝合金搅拌摩擦加工组织及性能. 上海交通大学学报. 2019(11): 1381-1388 .
    9. 任思蒙，高崇，李书磊，李超，赵丕植. 焊接速度对厚板5083铝合金搅拌摩擦焊接头组织与性能的影响. 电焊机. 2018(08): 104-108 .

    Other cited types(9)

Catalog

    Get Citation
    PDF
    XML
    Article views (233) PDF downloads (61) Cited by(18)
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return