Advanced Search
WANG Xijing, LI Shuwei, NIU Yong, Zhang Jie. Fatigue crack growth rate of A7075 FSW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (9): 5-7.
Citation: WANG Xijing, LI Shuwei, NIU Yong, Zhang Jie. Fatigue crack growth rate of A7075 FSW[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (9): 5-7.
shu

Fatigue crack growth rate of A7075 FSW

  • State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China

More Information
  • Received Date: October 23, 2007
    Graphical Abstract
    • Abstract
  • The fatigue crack growth rate of A7075-T651 aluminum baseplate, FSW welding and heat-affected zone were studied. And A7075-T651 aluminum baseplate were welded with FSW-3LM-015 friction stir welding machine.Fatigue crack growth tests using CT specimen and 810 Material test system for testing machine.Polynomial method obtained by increasing fatigue crack growth rate (da/dN)and (ΔK) respectively, include the base metal and welding zone and the heat-affected zone in the same sample group (da/dN) and (ΔK)combined data points overall regression analysis.Experimental results indicated fatigue crack growth rate of the heat-affected zone is higher than that of the base metal and weld the nuclear area
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]WANG Tao, XUE Gang, YANG Jianguo, FANG Hongyuan. Equal load carrying capacity design system of joint based on stress intensity factor[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (8): 101-104.
    [2]WANG Tao, YANG Jianguo, LIU Xuesong, FANG Hongyuan, ZHOU Lipeng. Influence of joint geometric parameters on shape factor of under-matched butt joint with center crack[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (1): 101-104.
    [3]XU Lianyong, JING Hongyang. Stress intensity factor of interfacial crack between metal-base ceramic coating and steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (3): 84-88.
    [4]YU Ping, TIAN Zhiling, PAN Chuan, XUE Zhenkui. Gas in weld for self-shielded flux-cored arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (2): 67-70.
    [5]SUI Yong-li, DU Ze-yu, HUANG Fu-xiang, TIAN Liang. Influence of hydrogen on weld metal toughness by self-shielded flux-cored wire welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (12): 74-76.
    [6]WANG Bao, YANG Lin, WANG Yong. Observation and analysis of metal transfer phenomena for flux-cored electrodes in CO2 arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (7): 77-80.
    [7]ZHANG Zhong-ping, HUO Li-xing, WANG Dong-po, ZHANG Yu-feng. Effect of sprayed coatings on stress intensity factor of weld toe crack of cruciform welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (2): 85-88.
    [8]WANG Fu-de, LI Zhi-yuan, YOU Min. Abrasive Wear of Cladding Metal of YDCrMoV CO2 Shielded Flux-cored Wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (4): 46-49.
    [9]Zhang Wenyue, Yang Qingxia, Xu Yuhuan. Research on hardening factor of welding HAZ[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1991, (4): 195-200.
    [10]Zhang Wenyue, Zhu Meili, Qin Boxiong. Research on effective diffusive hydrogen and hydrogen diffusive factor of welding cold cracking susceptibility[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1991, (3): 129-135.

Catalog

    Get Citation
    PDF
    XML
    Article views (192) PDF downloads (64) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return