Advanced Search
Yin Shike, Wang Yishan, Guo Huaili. Influnce of weld thermal cycle on properties of 10Ni5CrMoV steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (3): 147-153.
Citation: Yin Shike, Wang Yishan, Guo Huaili. Influnce of weld thermal cycle on properties of 10Ni5CrMoV steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (3): 147-153.

Influnce of weld thermal cycle on properties of 10Ni5CrMoV steel

More Information
  • Received Date: April 27, 1994
  • In this paper,by weld themo-simulation test with different peak temperatures and t8/5,the variation of HAZ properties of 10Ni5CrMoV steel was studied.The results obtained from the test showed that when the peak temperature of single thermal cycle increased,the HAZ impact toughness decreased, when t8/5≤40s,the impact toughness increased with t8/5 raising,but when t8/5 40s, the HAZ impact to ughness evidently decreased with t8/5 raising.The variation of temperature in repeately thermal cycle had no remarkable effect on the impact toughness.But when the peak temperature of the thermal cycle was 1350℃ firstly and 950℃ secondly,thehistogenetic phenomenon appeared in the HAZ.It's features and producing condition were explained in this paper.
  • Related Articles

    [1]LI Ruiying, ZHAO Ming, WU Chunmei. Determination of shape parameters of double ellipsoid heat source model in numerical simulation based on SYSWELD software[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(10): 93-96.
    [2]LI Yongzhi, LU Hao, CHEN Junmei, REN Liping. Welding deformation prediction and structure optimization of air conditioning compressor based on FEM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (3): 45-48.
    [3]MA Wenbo, CHEN Shuguang, LIU Huiqiong, LIN Wen, SHEN Yulong, LIU Jipu. FEM simulation of calibration on strain release coefficients in blind hole method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (2): 97-100.
    [4]LUO Aihui, ZHANG Yansong, CHEN Guanlong, ZHU Wenfeng. Heat input mechanics for spot welding electrode based on FEM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (5): 41-44.
    [5]ZHANG Jianqiang, ZHANG Guodong, ZHAO Haiyan, YUE Hongjie, ZHANG Haiquan, LU Anli. 3D-FEM numerical simulation of welding stress in thin aluminum alloy plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (6): 5-9.
    [6]HU Yong-fang, XUE Song-bai, YU Sheng-lin. FEM analysis of stress and strain in CBGA solder joint with different size under thermal cycle[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (10): 97-100.
    [7]WU Su, ZHAO Hai-yan, WANG Yu, ZHANG Xiao-hong. A new heat source model in numerical simulation of high energy beam welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (1): 91-94.
    [8]JIA Fa yong, HUO Li xing, ZHANG Yu feng, YANG Xin qi. Key influence factors in hot spot stress FEM analysis[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (3): 27-30.
    [9]WANG Jian hua, LU Hao, WEI Liang wu. Prediction of Welding Distortions Based on Theory of Inherent Strain by FEM and Its Application[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (6): 36-40.
    [10]LI Jie, Zhang Yu-feng, HUO Li-xing, WANG Dong-po. FEM Analysis of Beam-to-Column Welded Connection Under the Simulating Earthquake Cyclic Load[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (5): 15-18.
  • Cited by

    Periodical cited type(6)

    1. 郑文健,王宇,余洋,冯道臣,俞臻,王文军,闫德俊,杨建国. 氢致固态相变对AlCoCrFeNi_(2.1)共晶高熵合金力学性能的影响. 材料工程. 2025(02): 152-159 .
    2. 刘爱国,王昕龙,王微伟. 基于CiteSpace的国内高熵合金焊接研究进展分析. 焊接技术. 2024(10): 7-12 .
    3. 黄淼,冯道臣,刘一飞,郑文健,闫德俊,赖少波,杨建国. 电子束表面重熔高熵合金疲劳裂纹扩展行为研究. 材料科学与工艺. 2024(06): 1-9 .
    4. 唐景黎,黄本生,黄思语,郑建能. 高熵合金焊接技术研究现状与展望. 材料热处理学报. 2023(01): 10-21 .
    5. 杨柳青. 高熵合金在焊接领域当中的应用分析. 冶金与材料. 2023(06): 160-162 .
    6. 张秉刚,王一帆,王厚勤. 先进材料与异种材料电子束焊接研究进展. 焊接学报. 2022(08): 95-101+119-120 . 本站查看

    Other cited types(0)

Catalog

    Article views (307) PDF downloads (59) Cited by(6)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return