- Ei Compendex
- Scopus
- DOAJ
- Chinese Science Citation Database (CSCD)
- World Journals Clout Index Report
- T1 level in Directory for Mechanical EngineeringDisciplines
| Citation: |
PENG Jin, XU Hongqiao, WANG Xingxing, LI Shuai, LI Liqun, LONG Weimin, CHEN Benle. Study on the dynamic behavior of molten pool in laser welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(11): 1-7. DOI: 10.12073/j.hjxb.20221220001
|
In this paper, the dynamic behaviors of molten pool in autogenous laser welding and laser welding with filler wire were analyzed by high-speed camera online monitoring system, and the appearance of weld was compared and analyzed.The dynamic behaviors of molten pool under the action of autogenous laser welding and laser welding with filler wire were further analyzed by numerical simulation.The results showed that the surface of the molten pool behind the keyhole wall in autogenous laser welding, the flow from the keyhole opening to the tail of the molten pool occurred, and the metal bulge appeared behind the keyhole opening. The size of the metal bulge was large, and the weld formation in autogenous laser welding was poor, and there were pits on the surface.The surface melt of the molten pool behind the keyhole wall in laser welding with filler wire flowed from the keyhole opening to the tail of the molten pool. But under the surface of the molten pool there was a flow from the tail of the molten pool to the keyhole. Although welding spatter would also occur, the size of welding spatter was relatively small, and due to the filling effect of liquid metal, the weld surface was not easy to appear concave defects, and the weld was well formed. Compared with the autogenous laser welding, the fluctuation of melt flow velocity behind the keyhole wall increased significantly after the liquid droplet entered the molten pool.
| [1] |
刘红兵, 陶汪, 陈洁, 等. 激光填丝焊焊丝熔入行为特征[J]. 焊接学报, 2013, 34(11): 73 − 77.
Liu Hongbing, Tao Wang, Chen Jie et al. Filler wire dynamics during laser beam welding with filler wire[J]. Transactions of the China Welding Institution, 2013, 34(11): 73 − 77.
|
| [2] |
彭进, 李俐群, 林尚扬 等. 激光液态填充焊的填材熔化与过渡稳定性[J]. 焊接学报, 2016, 37(7): 9 − 12.
Peng Jin, Li Liqun, Lin Shangyang, et al. Stability of filler melting and transfer with pre-melting liquid filler[J]. Transactions of the China Welding Institution, 2016, 37(7): 9 − 12.
|
| [3] |
Dilthey U, Fuest D, Scheller W. Laser welding with filler wire[J]. Optical and Quantum Electronics, 1995, 27: 1181 − 1191. doi: 10.1007/BF00326474
|
| [4] |
Zhang X, Yang W X, Xiao R S. Microstructure and mechanical properties of laser beam welded Al-Li alloy 2060 with Al-Mg filler wire[J]. Materials & Design, 2015, 88: 446 − 450.
|
| [5] |
Jokinen T, Karhu M, Kujanpää V. Welding of thick austenitic stainless steel using Nd: Yttrium–Aluminum–Garnet laser with filler wire and hybrid process[J]. Journal of Laser Applications, 2003, 15(4): 220 − 224. doi: 10.2351/1.1620007
|
| [6] |
Li S C, Chen G Y, Katayama S, et al. Relationship between spatter formation and dynamic molten pool during high-power deep-penetration laser welding[J]. Applied Surface Science, 2014, 303: 481 − 488. doi: 10.1016/j.apsusc.2014.03.030
|
| [7] |
Kawahito Y, Mizutani M, Katayama S. Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometry[J]. Journal of Physics D:Applied Physics, 2007, 40(19): 5854 − 5859. doi: 10.1088/0022-3727/40/19/009
|
| [8] |
Katayama S, Kawahito Y, Mizutani M. Elucidation of laser welding phenomena and factors affecting weld penetration and welding defects[J]. Physics Procedia, 2010, 5: 9 − 17. doi: 10.1016/j.phpro.2010.08.024
|
| [9] |
Sohail M, Han S W, Na S J, et al. Characteristics of weld pool behavior in laser welding with various power inputs[J]. Welding in the World, 2014, 58(3): 269 − 277. doi: 10.1007/s40194-014-0112-4
|
| [10] |
Li X B, Lu F G, Cui H C, et al. Numerical modeling on the formation process of keyhole-induced porosity for laser welding steel with T-joint[J]. International Journal of Advanced Manufacturing Technology, 2014, 72(1): 241 − 254.
|
| [11] |
张屹, 刘西霞, 史如坤, 等. 基于Level-Set方法的小孔及熔池动态形成数值模拟[J]. 焊接学报, 2016, 37(4): 29 − 34.
Zhang Yi, Liu Xixia, Shi Rukun, et al. Numerical simulation of deep-penetration laser welding based on level-set method[J]. Transactions of the China Welding Institution, 2016, 37(4): 29 − 34.
|
| [12] |
彭进, 胡素梦, 王星星 等. 填材对激光焊接匙孔与熔池三维瞬态行为的影响[J]. 中国激光, 2018, 45(1): 0102003.
Peng Jin, Hu Sumeng, Wang Xingxing, et al. Numerical simulation of effect of filler metal on three-dimensional transient behavior of keyhole and molten pool in laser welding[J]. Chinese Journal of Lasers, 2018, 45(1): 0102003.
|
| [1] | LIU Yuan, Li Yue, WANG Jianfeng, WANG Leilei, ZHAN Xiaohong. The effect of heat input on the dynamic characteristic of keyhole during laser mirror welding of 2219 aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(6): 103-110. DOI: 10.12073/j.hjxb.20220802003 |
| [2] | Liqun LI, Ping HE, Jianfeng GONG. Simulation analysis of droplet action on keyhole during laser-MIG composite welding of aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(8): 1-7. DOI: 10.12073/j.hjxb.20220304002 |
| [3] | WANG Hongyu, DING Rui, HUANG Aiguo, KAN Peng. Analysis on keyhole phase change and flow field of back reflection induced synergistic laser weld[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(5): 125-128. DOI: 10.12073/j.hjxb.2018390137 |
| [4] | AO Sansan, LUO Zhen, HUANG Zunyue, FENG Mengnan. Numerical calculation and experimental analysis based on acoustic emission of molten pool keyhole in laser deep penetration welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(11): 93-98. |
| [5] | LIU Chengcai, LIU Chengdan, LIU Weiwei, HE Jingshan. Numerical simulation of keyhole evolution for 2219 aluminum alloy electron beam spot welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(4): 115-118. |
| [6] | CHEN Weidong, PANG Shengyong, LIAO Dunming, ZHOU Jianxin. Numerical simulation of transient keyhole instability and weld pool behaviors in parallel dual-beam laser welding Part I. Model development and transient keyhole behaviors[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (3): 5-9. |
| [7] | ZHANG Tao, WU Chuansong. Numerical simulation of temperature field and fluid flow in keyhole plasma arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (7): 87-90. |
| [8] | LUO Yi, LIU Jinhe, YE Hong. Numerical simulation on keyhole thermal effect of vacuum electron beam welding of magnesium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (12): 73-76. |
| [9] | WANG Renping, LEI Yongping, SHI Yaowu. Numerical simulation of keyhole formation process in laser deep penetration welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (11): 38-40. |
| [10] | PANG Shengyong, CHEN Liliang, YIN Yajun, HU Lunji, DUAN Aiqin. Simulations of transient keyhole and dynamic melt pool behaviors during laser welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (2): 71-74. |
| 1. |
杨泽坤，徐锴，杨战利，张焱，费大奎，周坤，杨永波. 缆式焊丝GMAW焊缝截面侧偏行为机理分析. 焊接学报. 2024(01): 83-87+134 .
 本站查看
| |
| 2. |
赵文勇，胥国祥. 基于数值模拟技术的焊接结构学课程教学改革研究. 造纸装备及材料. 2024(11): 254-256 .
|
Supported by:
Beijing Renhe Information Technology Co. Ltd
DownLoad: