Citation: | LIU Xiaogang, SHEN Shun, ZHU Yangyang. Establishment of microstructure model of welded joint based on improved VORONOI diagram method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(1): 60-66. DOI: 10.12073/j.hjxb.20210515002 |
李星, 方斌, 徐秀国, 等. 材料微观组织结构三维模拟的研究进展[J]. 材料导报, 2011, 25(S2): 245 − 247.
Li Xing, Fang Bin, Xu Xiuguo, et al. Research progress in three-dimensional simulation of material microstructure[J]. Materials Review, 2011, 25(S2): 245 − 247.
|
左永基. 考虑电子束焊接头微观组织特性的疲劳裂纹萌生数值模拟[D]. 南京: 南京航空航天大学, 2019.
Zuo Yongji. Numerical simulation of fatigue crack initiation considering the microstructure characteristics of electron beam welding joint [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2019.
|
Zyska Andrzej. CA modeling of microsegregation and growth of equiaxed dendrites in the binary Al-Mg alloy[J]. Materials, 2021, 14(12): 3393. doi: 10.3390/ma14123393
|
张昭, 胡超平. 搅拌头转速对2024-T3铝合金搅拌摩擦焊接中晶粒生长的影响[J]. 机械工程材料, 2018, 42(3): 80 − 86. doi: 10.11973/jxgccl201803015
Zhang Zhao, Hu Chaoping. Effect of rotation speed of stirring head on grain growth in friction stir welding of 2024-T3 aluminum alloy[J]. Mechanical Engineering Materials, 2018, 42(3): 80 − 86. doi: 10.11973/jxgccl201803015
|
Zhang T, Lu S H, Wu Y X, et al. Optimization of deformation parameters of dynamic recrystallization for 7055 aluminum alloy by cellular automaton[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(6): 1327 − 1337. doi: 10.1016/S1003-6326(17)60154-7
|
Kim S G, Hwang H S, Huh J Y. Phase-field simulations of dendritic morphologies in hot-dip galvanized Zn-Al coatings[J]. Computational Materials Science, 2021, 186: 110060. doi: 10.1016/j.commatsci.2020.110060
|
熊凌轩. GH4169高温合金微观组织的三维EBSD重构及细观力学模拟研究[D]. 哈尔滨: 哈尔滨工业大学, 2019.
Xiong Lingxuan. Three-dimensional EBSD reconstruction of the microstructure of GH4169 superalloy and study on micromechanics Simulation [D]. Harbin: Harbin Institute of Technology, 2019.
|
杨宝林. 某型粉末合金材料微观组织结构的计算机重构[D]. 兰州: 兰州理工大学, 2011.
Yang Baolin. Computer reconstruction of microstructure of a certain powder alloy material[D]. Lanzhou: Lanzhou University of Technology, 2011.
|
Herrera S V, Niffenegger M. Application of hysteresis energy criterion in a microstructure-based model for fatigue crack initiation and evolution in austenitic stainless steel[J]. International Journal of Fatigue, 2017, 100: 84 − 93. doi: 10.1016/j.ijfatigue.2017.03.014
|
Truong D T, Takeshi I. A computational simulation of martensitic transformation in polycrystal TRIP steel by crystal plasticity FEM with voronoi tessellation[J]. Key Engineering Materials, 2019, 4712: 71 − 77.
|
Hoshide T, Kusuura K. Life prediction by simulation of crack growth in notched components with different microstructure and under multiaxial fatigue[J]. Fatigue & Fracture of Engineering Materials & Structures, 1998, 21(2): 201 − 213.
|
史君林, 赵建平. 基于Voronoi图金属微观多晶体三维建模方法与拉伸模拟[C]// 中国机械工程学会压力容器分会. 第九届全国压力容器学术会议论文集—压力容器先进技术, 合肥: 合肥工业大学出版社, 2017: 174 − 179.
Shi Junlin, Zhao Jianping. Three-dimensional modeling method and tensile simulation of metal micro-polycrystal based on Voronoi diagram [C]// Pressure Vessel Branch of China Mechanical Engineering Society. Proceedings of the Ninth National Conference on Pressure Vessels—Advanced Technology of Pressure Vessel, Hefei: Hefei University of Technology Publishing House, 2017: 174 − 179.
|
Kramberger J, Jezernik N, Göncz P, et al. Extension of the Tanaka–Mura model for fatigue crack initiation in thermally cut martensitic steels[J]. Engineering Fracture Mechanics, 2009, 77(11): 2040 − 2050.
|
牟园伟, 陆山. 基于宏—细观模型的疲劳裂纹萌生数值模拟[J]. 机械强度, 2012, 34(3): 379 − 383.
Mou Yuanwei, Lu Shan. Numerical simulation of fatigue crack initiation based on macro-microscopic model[J]. Mechanical strength, 2012, 34(3): 379 − 383.
|
王东, 赵军. 基于Voronoi法和随机法的微纳米复合陶瓷刀具材料微观结构建模[J]. 人工晶体学报, 2015, 44(10): 2918 − 2923. doi: 10.3969/j.issn.1000-985X.2015.10.050
Wang Dong, Zhao Jun. Modeling of micro-nano composite ceramic tool material microstructure based on Voronoi method and random method[J]. Chinese Journal of Intraocular Crystal, 2015, 44(10): 2918 − 2923. doi: 10.3969/j.issn.1000-985X.2015.10.050
|
刘俊卿, 李蒙, 左帆. 基于晶体塑性理论的疲劳裂纹起始数值模拟[J]. 航空材料学报, 2016, 36(2): 74 − 79. doi: 10.11868/j.issn.1005-5053.2016.2.012
Liu Junqing, LI Meng, Zuo Fan. Numerical simulation of fatigue crack initiation based on crystal plasticity theory[J]. Journal of Aeronautical Materials, 2016, 36(2): 74 − 79. doi: 10.11868/j.issn.1005-5053.2016.2.012
|
钟飞. 基于晶体塑性有限元的镍基合金GH4169拉伸性能及疲劳行为研究[D]. 上海: 华东理工大学, 2017.
Zhong Fei. Study on tensile properties and fatigue behavior of Nickel base alloy GH4169 based on crystal plastic finite element [D]. Shanghai: East China University of Science and Technology, 2017.
|
刘金义, 刘爽. Voronoi图应用综述[J]. 工程图学学报, 2004(2): 125 − 132.
Liu Jinyi, Liu Shuang. Overview of Voronoi diagram application[J]. Journal of Engineering Graphics, 2004(2): 125 − 132.
|
邓彩艳, 尹庭辉, 龚宝明. TC11钛合金电子束焊接接头超高周疲劳性能[J]. 焊接学报, 2018, 39(4): 23 − 26. doi: 10.12073/j.hjxb.2018390088
Deng Caiyan, Yin Tinghui, Gong Baoming. Properties of very-high-cycle fatigue of TC11 titanium alloy EBW welded joints[J]. Transactions of the China Welding Institution, 2018, 39(4): 23 − 26. doi: 10.12073/j.hjxb.2018390088
|
Tanaka K, Mura T. A dislocation model for fatigue crack initiation[J]. Journal of Applied Mechanics, 1981, 48(1): 97 − 103. doi: 10.1115/1.3157599
|
邓彩艳, 刘庚, 龚宝明, 等. 基于Tanaka-Murad位错模型的疲劳裂纹萌生寿命预测[J]. 焊接学报, 2021, 42(1): 30 − 37. doi: 10.12073/j.hjxb.20200706003
Deng Caiyan, Liu Geng, Gong Baoming, et al. Fatigue crack initiation life prediction based on Tanaka-Mura dislocation model[J]. Transactions of the China Welding Institution, 2021, 42(1): 30 − 37. doi: 10.12073/j.hjxb.20200706003
|
田伟, 钟燕, 王宇宙, 等. GH4169D合金电子束焊接接头显微组织和持久断裂特征[J]. 稀有金属材料与工程, 2021, 50(3): 1055 − 1061.
Tian Wei, Zhong Yan, Wang Yuzhou, et al. Microstructure and stress rupture characteristic of electron beam welded GH4169D alloy[J]. Rare Metal Materials and Engineering, 2021, 50(3): 1055 − 1061.
|
许磊. GH4169电子束焊接头拉剪复合应力下疲劳寿命预测模型研究[D]. 南京: 南京航空航天大学, 2021.
Xu Lei. Study on fatigue life prediction model of GH4169 electron beam welded joint under tension and shear compound stress[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2021.
|
[1] | YANG Yule, DAI Yanfeng, GUO Meng, YANG Chao, PENG Weikang. Microstructure and mechanical properties of ultra-high strength AerMet 100 Steel formed by laser metal deposition[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2025, 46(3): 137-144. DOI: 10.12073/j.hjxb.20231219002 |
[2] | XIE Yujiang, YANG Yule, CHI Changtai. Microstructures and mechanical properties of laser metal deposited 24CrNiMo steel in different atmospheres[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(5): 19-24. DOI: 10.12073/j.hjxb.20190905001 |
[3] | WANG Bo, LIU Han, XUE Songbai, LI Yang, LOU Jiyuan, LOU Yinbin. Effect of rare earth Ce on microstructure and properties of Zn-22Al filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (11): 61-64. |
[4] | ZHANG Man, WANG Pengfei, ZHANG Lincai, LIN Yuebin. Microstructure and mechanical properties of Cu/Al joint brazed with Zn-Al-Ag filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (9): 55-58. |
[5] | SHEN Zhikang, YANG Xinqi, ZHANG Zhaohua, YIN Yuhuan. Analysis of microstructure and mechanical properties of refill friction stir spot welded aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (6): 73-76. |
[6] | ZHANG Shuai, XUE Songbai, YANG Jinlong, LOU Jiang, WANG Shuiqing. Effect of P element on microstructure and properties of Al-Si-Zn filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (5): 103-107. |
[7] | YANG Changyong, XU Jiuhua, DING Wenfeng, FU Yucan, CHEN Zhenzhen. Microstructure and mechanical property of Ag-Cu-Ti fillers added with rare earth lanthanum[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (1): 67-70,74. |
[8] | ZHANG Weihua, QIU Xiaoming, CHEN Xiaowei, ZHAO Xihua, SUN Daqian, LI Yongqiang. Microstructure and mechanical property of transient liquid phase bonded aluminum silicon alloy joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (2): 121-124. |
[9] | HAN Xianpeng, XUE Songbai, Gu Liyong, GU Wenhua, ZHANG Xin. Effect of gallium on microstructure and mechanical properties of Ag-Cu-Zn filler metals[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (2): 45-48. |
[10] | SHI Yiping, XUE Songbai, WANG Jianxin, GU Liyong, GU Wenhua. Effects of Ce on spreadability of Sn-Cu-Ni lead-free solder and mechanical properties of soldered joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (11): 73-77. |
1. |
余丁坤,薛鹏,陈融,黄世盛,王萍,唐卫岗. 低银BAg10CuZnSnInNd钎料组织与性能. 焊接学报. 2023(04): 93-97+134-135 .
![]() | |
2. |
彭宇涛,李佳航,李子坚,俞强,沈炳建,王晓飞,王晓蓉,沈杭燕,刘薇. 低银无镉Ag-Cu-Zn钎料的合金化改性. 材料热处理学报. 2020(02): 166-172 .
![]() | |
3. |
曹秀斌,郭亚静,钱敏科,王俭辛. Pr对Ag30CuZnSn接头强度的影响及断口分析. 江苏科技大学学报(自然科学版). 2020(06): 23-25+100 .
![]() |