Advanced Search
ZHENG Shaoxian, JIA Kun, WANG Junping, ZHAO Xilong, SHI Wei. Formation mechanism of the grain boundary parallel to the edge of the “island-shaped zone” of the dissimilar steel joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(2): 48-53. DOI: 10.12073/j.hjxb.20211126003
Citation: ZHENG Shaoxian, JIA Kun, WANG Junping, ZHAO Xilong, SHI Wei. Formation mechanism of the grain boundary parallel to the edge of the “island-shaped zone” of the dissimilar steel joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(2): 48-53. DOI: 10.12073/j.hjxb.20211126003
shu

Formation mechanism of the grain boundary parallel to the edge of the “island-shaped zone” of the dissimilar steel joint

  • 1.

    Lanzhou Jiaotong University, Lanzhou, 730070, China

  • 2.

    Lanzhou LS Test Technology Co., Ltd., Lanzhou, 730314, China

More Information
  • Received Date: November 25, 2021
  • Available Online: February 06, 2023
    Graphical Abstract
    • Abstract
  • The grain boundary parallel to the edge of the “island-shaped zone” (ISZ) near the carbon steel fusion line of the dissimilar steel joint was studied. It was shown that the grain boundary parallel to the edge of the ISZ might be the migrated grain boundary or the solidified grain boundary. The ISZ had three kinds of structures, the first was consisted of the carbon steel base material and the composition transition region of its periphery, and the elements content in the composition transition region was between the carbon steel base material and the weld metal; the second was only consisted of the composition transition region, and the elements content in the composition transition region was also between the carbon steel base material and the weld metal; the third was only consisted of the composition transition region, but the Ni content in the composition transition region was higher than 5% − 6%. Only the ISZ with the first and second structures were possible to form the migrated grain boundary parallel to the edge of the ISZ, but the ISZ with the third structure could not form the migrated grain boundary parallel to the edge of the ISZ. The solidified grain boundary parallel to the edge of the ISZ was formed by the intersection of short cellular grains growing perpendicular to the ISZ surface with their adjacent subgrain bundles.
    • FullText(HTML)
    • References (13)
  • Omar A A. Effect of welding parameters on hard zone formation at dissimilar metal metal welds[J]. Welding Journal, 1998, 77(2): 86 − 93.
    李克俭, 李晓刚, 张宇, 等. 异种金属焊接接头微观组织演化及高温失效机理综述[J]. 电焊机, 2020, 50(9): 17 − 43. doi: 10.7512/j.issn.1001-2303.2020.09.03

    Li Kejian, Li Xiaogang, Zhang Yu, et al. Microstructure evolution and high temperature failure mechanism of dissimilar metal welded joints[J]. Electric Welding Machine, 2020, 50(9): 17 − 43. doi: 10.7512/j.issn.1001-2303.2020.09.03
    Alexandrov B T, Lippold J C, Sowards J W, et al. Fusion boundary microstructure evolution associated with embrittlement of Ni-base alloy overlays applied to carbon steel[J]. Welding in the World, 2013, 57(1): 39 − 53. doi: 10.1007/s40194-012-0007-1
    陆文雄, 张汉谦, 吴宇, 等. 异种钢焊接接头熔合区中的“富奥氏体带”[J]. 焊接学报, 1988, 9(3): 134 − 140.

    Lu Wenxiong, Zhang Hanqian, Wu Yu, et al. “Austenite-rich band” in the fusion zone of dissimilar steel welded joint[J]. Transactions of the China Welding Institution, 1988, 9(3): 134 − 140.
    Soysal T, Kou S, Tat D, et al. Macrosegregation in dissimilar-metal fusion welding[J]. Acta Materialia, 2016, 110(1): 149 − 160.
    Nelson T W, Lippold J C, Mills M J. Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar metal welds, part2: on-cooling transformations[J]. Welding Journal, 2000, 79(10): 267s − 277s.
    郑韶先, 时哲, 韩峰, 等. 超细颗粒焊剂约束电弧超窄间隙焊接1Cr18Ni9Ti不锈钢的焊缝成形分析[J]. 焊接学报, 2015, 36(2): 67 − 70.

    Zheng Shaoxian, Shi Zhe, Han Feng, et al. Ultra-narrow-gap weld of 1Cr18Ni9Ti stainless steel with constricted arc by ultra-fine granular flux[J]. Transactions of the China Welding Institution, 2015, 36(2): 67 − 70.
    Zheng Shaoxian, Li Xiaolei, Che Jun, et al. Weld formation and heating mechanism in ultra-narrow gap with constricted arc by ultra-fine granular flux[J]. China Welding, 2012, 21(1): 39 − 43.
    Lippold J C. Solidification behavior and cracking susceptibility of pulsed-laser welds in austenitic stainless steels[J]. Welding Journal, 1994, 73(6): 129s − 139s.
    潘春旭. 异种钢及异种金属焊接——显微结构特征及其转变机理[M]. 北京: 人民交通出版社, 2000.

    Pan Chunxu. Welding of dissimilar steel and dissimilar metals—microstructural characteristics and its transformation mechanism[M]. Beijing: China Communications Press, 2000.
    郑韶先, 曾道平, 孟倩, 等. 填充ER309焊丝的异种钢接头二型边界形成机理[J]. 焊接学报, 2021, 42(4): 56 − 61. doi: 10.12073/j.hjxb.20200902001

    Zheng Shaoxian, Zeng Daoping, Meng Qian, et al. Formation mechanism analysis of the type-II boundary of dissimilar steel joint with the filler metal of ER309[J]. Transactions of the China Welding Institution, 2021, 42(4): 56 − 61. doi: 10.12073/j.hjxb.20200902001
    孙齐磊, 邓化凌. 工程材料及其热处理[M]. 北京: 机械工业出版社, 2016.

    Sun Qilei, Deng Hualing. Engineering material and heat treatment [M]. Beijing: China Machine Press, 2016.
    埃里希·福克哈德. 不锈钢焊接冶金[M]. 栗卓新, 朱学军, 译. 北京: 化学工业出版社, 2004.

    Erich Folkhard. Welding metallurgy of stainless steel[M]. Li Zhuoxin, Zhu Xuejun , translated. Beijing: Chemical Industry Press, 2004.
    • Related Articles

  • Related Articles

    [1]WU Gang, CHEN Tian, YU Lianghui, LIU Zhipeng. Study on classification of tensile shear strength of spot welding joints based on PSO-SVM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(9): 120-128. DOI: 10.12073/j.hjxb.20230820001
    [2]FAN Wenxue, CHEN Furong. Prediction and optimization of tensile strength of 7A52 aluminum alloy friction stir welding joints based on response surface methodology[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(9): 55-60. DOI: 10.12073/j.hjxb.20210322001
    [3]YUAN Tao1, CHEN Shujun1, LUO Zhen2, ZHANG Yu2. A grain refining method of Al alloy welds with ultrasonic stirring[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(5): 21-24. DOI: 10.12073/j.hjxb.2018390114
    [4]ZHOU Liucheng, ZHOU Lei, LI Yinghong, WANG Cheng. Effect of laser shock processing on tensile strength of welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (4): 52-54,58.
    [5]CHEN Jianfeng, CAO Pingzhou, DONG Xianfeng. Experiment on tensile and shear strength of front fillet welded joint post-high-temperatures[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (9): 81-84.
    [6]GANG Tie, ZHAO Xuemei, LIN Sanbao, LUAN Yilin. Non-destructive evaluation of FSW tensile property[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 1-4.
    [7]XUE Song-bai, WU Yu-xiu, CUI Guo-ping, ZHANG Ling. Numerical simulation of effect of thermal cycling on tensile strength and microstructure of QFP soldered joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (11): 1-4.
    [8]YAO Li-hua, XUE Song-bai, WANG Peng, LIU Lin. Effect of diode-laser parameters on tensile strength of QFP micro-joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (10): 90-92.
    [9]HU Yong-fang, XUE Song-bai, SHI Yi-ping, YU Sheng-lin. Effects of lead-free solder on the tensile strength of QFP micro-joints soldered with different pitchs[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (10): 72-74.
    [10]ZHU Liang, CHEN Jian-hang. Characteristics of stress distribution and prediction of strength inheat-affected zone softened welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (3): 48-51.

Catalog

    Get Citation
    PDF
    XML
    Article views (234) PDF downloads (61) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return