Advanced Search
LI Juan, LI Lixin, QIN Qingdong, TU Quan, HE Peng. Microstructure and property of SiC ceramic brazed joint filled with Ti foam/AlSiMg filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(9): 86-91. DOI: 10.12073/j.hjxb.20211213001
Citation: LI Juan, LI Lixin, QIN Qingdong, TU Quan, HE Peng. Microstructure and property of SiC ceramic brazed joint filled with Ti foam/AlSiMg filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(9): 86-91. DOI: 10.12073/j.hjxb.20211213001
shu

Microstructure and property of SiC ceramic brazed joint filled with Ti foam/AlSiMg filler metal

  • 1.

    Guizhou Key Laboratory for Preparation of Light Metal Materials, Guizhou Institute of Technology, Guiyang, 550003, China

  • 2.

    AECC Guizhou Liyang Aero-Engine Co., Ltd., Guiyang, 550014, China

  • 3.

    State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, China

More Information
  • Received Date: December 12, 2021
  • Available Online: April 28, 2022
    Graphical Abstract
    • Abstract
  • In order to enrich the design ideas of brazing filler metal for SiC ceramic, a novel Ti foam/AlSiMg composite filler has been proposed. The interfacial adhesion between the filler metal and SiC ceramic was improved by the dissolution of Ti element, and the in-situ reinforced brazing seam was obtained by the reaction between Ti foam and AlSiMg metal which improved the mechanical property of the joint. Vacuum brazing of SiC ceramics was carried out with brazing temperature of 700 ℃, holding time of 60 min and welding pressure of 10 MPa. Microstructure, composition and properties of the joints were analyzed by optical microscope, scanning electron microscope, energy dispersive spectrometer, X-ray diffractometer, electron microprobe analysis, and shearing test. The applicability of Ti foam/AlSiMg filler metal for SiC ceramic brazing was explored. The results show that the structure of the joint with Ti foam/AlSiMg filler was "SiC/Al/Ti(Al,Si)3/ Ti(Al,Si)3 in-situ reinforced Ti based brazing seam/Ti(Al,Si)3/Al/SiC". The fracture occurred between the Al alloy interfacial layer and SiC ceramic. The dissolution of Ti in the liquid Al alloy improved the interfacial adhesion between Al alloy interlayer and SiC ceramic. The shearing strength of the joint with Ti foam/AlSiMg filler metal was 111 MPa.
    • FullText(HTML)
    • References (18)
  • Wang G, Yang Y L, He R J, et al. A novel high entropy CoFeCrNiCu alloy filler to braze SiC ceramics[J]. Journal of the European Ceramic Society, 2020, 40: 3391 − 3398.
    Hao Z T, Wang D P, Yang Z W, et al. Microstructural evolution and mechanical properties of FeNi42 alloy and SiC ceramic joint vacuum brazed with Ag-based filler metals[J]. Ceramics International, 2020, 46: 12795 − 12805.
    Yang J, Huang J H, Ye Z, et al. Influence of interfacial reaction on reactive wettability of molten Ag-Cu-X wt.%Ti filler metal on SiC ceramic substrate and mechanism analysis[J]. Applied Surface Science, 2018, 436: 768 − 778.
    Song Y Y, Liu D, Hu S P, et al. Graphene nanoplatelets reinforced AgCuTi composite filler for brazing SiC ceramic[J]. Journal of the European Ceramic Society, 2019, 39: 696 − 704.
    Wang G, Cai Y J, Xu Q M, et al. Microstructural and mechanical properties of Inconel 600/ZrB2-SiC joints brazed with AgCu/Cu-foam/AgCu/Ti multi-layered composite filler[J]. Journal of Materials Research and Technology, 2020, 9(3): 3430 − 3437. doi: 10.1016/j.jmrt.2020.01.080
    Zhang L X, Zhang B, Sun Z, et al. Brazing of ZrB2-SiC-C and GH99 with AgCuTi/SiC interpenetrating network structural composite as an interlayer[J]. Ceramics International, 2020, 46: 10224 − 10232.
    Li C, Huang C Y, Chen L, et al. Microstructure and mechanical properties of the SiC/Nb joint brazed using AgCuTi + B4C composite filler metal[J]. International Journal of Refractory Metals and Hard Materials, 2019, 85: 105049.
    Wang Z Q, Li C, Si X Q, et al. Interfacial microstructure and mechanical properties of SiC joints achieved by reactive air brazing using Ag-V2O5 filler[J]. Journal of the European Ceramic Society, 2019, 39: 2617 − 2625.
    王星星, 彭进, 崔大田, 等. 一种AgCuTi钎料及其制备方法: CN106334882A [P]. 2017 − 01 − 18.

    Wang Xingxing, Peng Jin, Cui Datian, et al. A kind of preparation method for AgCuTi filler metal: CN106334882A[P]. 2017 − 01 − 18.
    Shi J M, Wang Q, Li J L, et al. Interfacial microstructure and mechanical property of ZrC-SiC ceramic and TiAl joint brazed with Ag-Zr active filler metal[J]. Materials Characterization, 2019, 156: 109850. doi: 10.1016/j.jeurceramsoc.2021.06.047
    Shi H J, Peng H B, Chai Y D, et al. Effect of Zr addition on the interfacial reaction of the SiC joint brazed by Inconel 625 powder filler[J]. Journal of the European Ceramic Society, 2021, 41(13): 6238 − 6247.
    Li Z, Wei R W, Wen Q, et al. Microstructure and mechanical properties of SiC ceramic joints vacuum brazed with in-situ formed SiC particulate reinforced Si-24Ti alloy[J]. Vacuum, 2020, 173: 109160.
    He Z J, Li C, Yang B, et al. Interfacial reaction and brazing behaviour of SiCf/SiC with Cf/C composites using Si-10Zr at high temperatures[J]. Journal of the European Ceramic Society, 2021, 41: 1142 − 1150.
    Yang J, Zhang X Y, Ma G L, et al. Microstructural evolution and mechanical property of a SiCf/SiC composite/Ni-based superalloy joint brazed with an Au-Cu-Ti filler[J]. Journal of the European Ceramic Society, 2021, 41: 2312 − 2322.
    Yang J, Zhang X Y, Ma G L, et al. A study of the SiCf/SiC composite/ Ni-based superalloy dissimilar joint brazed with a composite filler[J]. Journal of Materials Research and Technology, 2021, 11: 2114 − 2126.
    林盼盼, 杨佳, 步澜斌, 等. TiZrNiCu钎焊(Cf-SiCf)/SiBCN与Nb的界面产物及机理分析[J]. 焊接学报, 2019, 40(9): 7 − 13.

    Lin Panpan, Yang Jia, Bu Lanbin, et al. Microstructure evolution and joining mechanism of brazing (Cf-SiCf)/SiBCN to Nb with TiZrNiCu[J]. Transactions of the China Welding Institution, 2019, 40(9): 7 − 13.
    Li J, Chang Z H, Li Y S, et al. Microstructure and property of bonds obtained by vacuum brazing using Al-Si-Ti-Cu-In filler metal[J]. China Welding, 2021, 30(3): 1 − 6.
    Wang G, Yang Y L, Wang M, et al. Brazing ZrB2-SiC ceramics to Nb with a novel CoFeNiCrCu high entropy alloy[J]. Journal of the European Ceramic Society, 2021, 41: 54 − 61.
    • Related Articles

  • Related Articles

    [1]TAO Jun, HOU Jinbao, JIANG Bangzheng, YANG Zhaoxi, CHEN Xiukai. Effect of SiC powder ratio on interfacial microstructure and mechanical property of CMC /superalloy brazing joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2025, 46(2): 87-94. DOI: 10.12073/j.hjxb.20240908002
    [2]YANG Jing, XUE Peng, ZHANG Yongfeng, FANG Xu, JIANG Chenyu, SHI Kai. Microstructure and properties of boron carbide ceramic brazed joints with high nitrogen steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(5): 113-118. DOI: 10.12073/j.hjxb.20230601001
    [3]GAO Hui, ZHOU Canfeng, HU Xiaohui, LI Wenlong. Microstructure and properties of annular coaxial powder feeding TIG cladding layer doped with SiC for 316L stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(4): 49-56. DOI: 10.12073/j.hjxb.20230424001
    [4]TAO Yong, WANG Rui, SONG Kuijing, LIU Dashuang, ZHONG Zhihong, WU Yucheng. Interfacial microstructure and mechanical properties of B4C matrix composite joints diffusion bonded with Ti interlayer[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(1): 29-35. DOI: 10.12073/j.hjxb.20210802001
    [5]LI Chun, ZHENG Zujin, QI Junlei, FENG Jicai, CAO Jian. Effect of the SiC content in the Ag-Cu+SiC composite brazing filler on the microstructure and mechanical properties of the Al2O3/TC4 brazing joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(12): 11-16. DOI: 10.12073/j.hjxb.2019400002-y
    [6]LIN Panpan, LIN Tiesong, HE Peng, WANG Maochang, YANG Hangao. Microstructure and mechanical property of Al2O3/Ti joint with biocompatibility[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(7): 16-23. DOI: 10.12073/j.hjxb.2019400175
    [7]SONG Xiaoguo, ZHAO Yixuan, HE Qiuyu, CAO Jian, LEI Yuzhen, FENG Jicai. Effect of Ti content in composite filler on interfacial microstructure and joining property of Si3N4 brazed joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(3): 5-8.
    [8]XU Xiaolong, LI Zhuoran, LIU Ruihua, WANG Zhengzheng. Microstructure and mechanical properties of ZrB2-SiC ceramic composite brazed joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(1): 59-62.
    [9]LI Zhuoran, XU Xiaolong, LIU Wenbo, LU Zhiguo. Effect of joint clearances on microstructure and property of brazed SiC ceramics[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (11): 9-12.
    [10]YANG Zhenwen, ZHANG Lixia, LIU Yuzhang, HE Peng. Microstructure and mechanical property of vacuum brazed TiAl and C/SiC joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (3): 65-68.

  • Cited by

    Periodical cited type(2)

    1. 康蕾，刘飞，陈韬. 1050A纯铝/TA15钛合金异种金属冷焊接头组织与性能. 焊接. 2024(12): 61-66 .
    2. 闫耀天，刘柏深，曹健，亓钧雷. 直流电热冲击辅助多组分氧化物钎焊SiC陶瓷的工艺及性能. 焊接学报. 2022(11): 22-29+164 . 本站查看

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML
    Article views (380) PDF downloads (46) Cited by(2)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return