Advanced Search
ZHENG Shaoxian, WANG Junping, ZHAO Xilong, SHI Wei. Microstructure and mechanical property of the thick-walled dissimilar steel joint of FSS/ASS with the combined "TIG cold welding + UNGW"[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(7): 28-35. DOI: 10.12073/j.hjxb.20210720001
Citation: ZHENG Shaoxian, WANG Junping, ZHAO Xilong, SHI Wei. Microstructure and mechanical property of the thick-walled dissimilar steel joint of FSS/ASS with the combined "TIG cold welding + UNGW"[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(7): 28-35. DOI: 10.12073/j.hjxb.20210720001
shu

Microstructure and mechanical property of the thick-walled dissimilar steel joint of FSS/ASS with the combined "TIG cold welding + UNGW"

  • 1.

    Lanzhou Jiaotong University, Lanzhou, 730070, China

  • 2.

    Lanzhou LS Test Technology Co., Ltd., Lanzhou, 730314, China

More Information
  • Received Date: July 19, 2021
  • Available Online: April 27, 2022
    Graphical Abstract
    • Abstract
  • A combined welding technology of "TIG cold welding + UNGW" in this paper was proposed, in order to effectively solve the problem of welding heat affected zone(HAZ) grain coarsening in ferritic stainless steel, and the problem of forming vermicular δ ferrite in the part of fusion zone of the welded joint and near welding HAZ for welding of austenitic stainless steel, which significantly reduces corrosion resistance in this areas. Welding between 1Cr17/1Cr18Ni9Ti thick wall dissimilar stainless steels was conducted, meanwhile the microstructure, mechanical properties and corrosion resistance of the welded joint were tested and analyzed. The result shows that the HAZ grains of 1Cr17 base metal of combined welded joint are not coarsened, moreover, there is no vermicular δ ferrite in the part of fusion zone and near heat affected zone of 1Cr18Ni9Ti base metal. The tensile strength of combined welded joint is better than that of 1Cr17 base metal, and the impact absorption energy of HAZ of 1Cr17 base metal is equivalent to that of the 1Cr17 base metal. It shows a downward trend of corrosion resistance from the cladding layer of combined welded joint, the 1Cr18Ni9Ti base metal, 1Cr17 base metal, UNGW weld zone to the welded joint.
    • FullText(HTML)
    • References (10)
  • 郑淮北, 叶晓宁, 张雪峰, 等. 12%Cr铁素体不锈钢粗晶区组织转变和晶粒长大及析出相分析[J]. 焊接学报, 2011, 32(6): 37 − 40.

    Zheng Huaibei, Ye Xiaoning, Zhang Xuefeng, et al. Microstructure transformation, grain growth and precipitated phase of 12%Cr ferritic stainless steel in coarse grain zone[J]. Transactions of the China Welding Institution, 2011, 32(6): 37 − 40.
    Lippold J C, Kotecki D J. 不锈钢焊接冶金学及焊接性[M]. 陈剑虹, 译. 北京: 机械工业出版社, 2008.

    Lippold J C, Kotecki D J. Welding metallurgy and weldability of stainless steel[M]. Chen Jianhong, trans. Beijing: China Machine Press, 2008.
    郑韶先, 徐龙强, 杜宝峰, 等. 1Cr18Ni9Ti不锈钢脉冲超窄间隙焊接头的组织及耐腐蚀性能[J]. 机械工程材料, 2021, 45(4): 13 − 18. doi: 10.11973/jxgccl202104003

    Zheng Shaoxian, Xu Longqiang, Du Baofeng, et al. Microstructures and corrosion resistance of 1Cr18Ni9Ti stainless steel pulsed ultra-narrow-gap welded joint[J]. Materials for Mechanical Engineering, 2021, 45(4): 13 − 18. doi: 10.11973/jxgccl202104003
    尚文娟. 430铁素体不锈钢焊接接头脆化及低热输入焊接工艺研究[D]. 兰州: 兰州理工大学, 2013.

    Shang Wenjuan. Study on welded joint embrittlement and low heat input welding technology of 430 ferritic stainless steel[D]. Lanzhou: Lanzhou University of Technology, 2013.
    贺舒榕, 王文先, 张婷婷, 等. 铁素体不锈钢CMT焊接接头HAZ组织性能研究[J]. 机械工程与自动化, 2014(5): 97 − 98. doi: 10.3969/j.issn.1672-6413.2014.05.039

    He Shurong, Wang Wenxian, Zhang Tingting, et al. Microstructures and properties of ferritic stainless steel CMT welding HAZ[J]. Mechanical Engineering & Automation, 2014(5): 97 − 98. doi: 10.3969/j.issn.1672-6413.2014.05.039
    刘腊腊, 胡绳荪, 申俊琦, 等. 激光焊接热输入对26Cr-3.5Mo铁素体不锈钢组织性能的影响[J]. 中国激光, 2015, 42(2): 101 − 107.

    Liu Lala, Hu Shengsun, Shen Junqi, et al. Effect of laser welding heat input on microstructure and properties of 26Cr-3.5Mo ferritic stainless steel[J]. Chinese Journal of Lasers, 2015, 42(2): 101 − 107.
    Reddy G M, Mohandas T, Rao A S, et al. Influence of welding processes on microstructure and mechanical properties of dissimilar austenitic-ferritic stainless steel welds[J]. Materials and Manufacturing Processes, 2007, 20(2): 147 − 173.
    郑韶先, 汪军平, 杨妹娟, 等. 1Cr17不锈钢表面TIG冷焊重熔和丝材熔敷工艺及改性层的组织和性能[J]. 机械工程材料, 2021, 45(12): 42 − 48. doi: 10.11973/jxgccl202112008

    Zheng Shaoxian, Wang Junping, Yang Meijuan, et al. Remelting and wire cladding process by TIG cold welding on surface of 1Cr17 stainless steel and microstructures and properties of modified layers[J]. Materials for Mechanical Engineering, 2021, 45(12): 42 − 48. doi: 10.11973/jxgccl202112008
    郑韶先, 时哲, 韩峰, 等. 超细颗粒焊剂约束电弧超窄间隙焊接1Cr18Ni9Ti不锈钢的焊缝成形分析[J]. 焊接学报, 2015, 36(2): 67 − 70.

    Zheng shaoxian, Shi Zhe, Han Feng, et al. Ultra-narrow-gap weld of 1Cr18Ni9Ti stainless steel with constricted arc by ultra-fine granular flux[J]. Transactions of the China Welding Institution, 2015, 36(2): 67 − 70.
    张勇, 覃作祥, 许鸿吉, 等. 经济型铁素体不锈钢焊接接头组织与耐蚀性能[J]. 焊接学报, 2012, 33(12): 18 − 22.

    Zhang Yong, Qin Zuoxiang, Xu Hongji, et al. Microstructure and corrosion resistance of welding joints of economic ferritic stainless steel[J]. Transactions of the China Welding Institution, 2012, 33(12): 18 − 22.
    • Related Articles

  • Related Articles

    [1]WU Gang, CHEN Tian, YU Lianghui, LIU Zhipeng. Study on classification of tensile shear strength of spot welding joints based on PSO-SVM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(9): 120-128. DOI: 10.12073/j.hjxb.20230820001
    [2]FAN Wenxue, CHEN Furong. Prediction and optimization of tensile strength of 7A52 aluminum alloy friction stir welding joints based on response surface methodology[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(9): 55-60. DOI: 10.12073/j.hjxb.20210322001
    [3]YUAN Tao1, CHEN Shujun1, LUO Zhen2, ZHANG Yu2. A grain refining method of Al alloy welds with ultrasonic stirring[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(5): 21-24. DOI: 10.12073/j.hjxb.2018390114
    [4]ZHOU Liucheng, ZHOU Lei, LI Yinghong, WANG Cheng. Effect of laser shock processing on tensile strength of welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (4): 52-54,58.
    [5]CHEN Jianfeng, CAO Pingzhou, DONG Xianfeng. Experiment on tensile and shear strength of front fillet welded joint post-high-temperatures[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (9): 81-84.
    [6]GANG Tie, ZHAO Xuemei, LIN Sanbao, LUAN Yilin. Non-destructive evaluation of FSW tensile property[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 1-4.
    [7]XUE Song-bai, WU Yu-xiu, CUI Guo-ping, ZHANG Ling. Numerical simulation of effect of thermal cycling on tensile strength and microstructure of QFP soldered joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (11): 1-4.
    [8]YAO Li-hua, XUE Song-bai, WANG Peng, LIU Lin. Effect of diode-laser parameters on tensile strength of QFP micro-joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (10): 90-92.
    [9]HU Yong-fang, XUE Song-bai, SHI Yi-ping, YU Sheng-lin. Effects of lead-free solder on the tensile strength of QFP micro-joints soldered with different pitchs[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (10): 72-74.
    [10]ZHU Liang, CHEN Jian-hang. Characteristics of stress distribution and prediction of strength inheat-affected zone softened welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (3): 48-51.

Catalog

    Get Citation
    PDF
    XML
    Article views (351) PDF downloads (55) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return