Advanced Search
XU Kai, WU Pengbo, LI Linlin, HUANG Ruisheng, LIANG Xiaomei, LIANG Yu. Microstructure and performance analysis of laser-MIG hybrid welding joints of aluminum alloy with multi-stranded wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(11): 43-49. DOI: 10.12073/j.hjxb.20210813001
Citation: XU Kai, WU Pengbo, LI Linlin, HUANG Ruisheng, LIANG Xiaomei, LIANG Yu. Microstructure and performance analysis of laser-MIG hybrid welding joints of aluminum alloy with multi-stranded wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(11): 43-49. DOI: 10.12073/j.hjxb.20210813001
shu

Microstructure and performance analysis of laser-MIG hybrid welding joints of aluminum alloy with multi-stranded wire

  • 1.

    Harbin Welding Institute Co., Ltd., Harbin 150028

  • 2.

    Norinco Group Air Ammunition Research Institute Co., Ltd., Harbin 150028

  • 3.

    Jiangsu Lianjie Welding Technology Co., Ltd., Jiangyin 214400

More Information
  • Received Date: August 12, 2021
  • Available Online: October 13, 2022
    Graphical Abstract
    • Abstract
  • The butt welding experiment of 5A06 aluminum alloy laser multi-strand MIG hybrid welding was carried out by 1 × 3 structure ER5356 aluminum alloy multi-strand wire. The mechanical properties and microstructures of 20 mm thick welded joints were studied by scanning electron microscopy, EBSD analysis, tensile and hardness tests. The results showed that the laser multi-strand MIG hybrid welding presented good process performance. The weld was mainly composed of α (Al) matrix and dispersedly distributed Al3Mg2 second phases. The center zone of the weld was mainly equiaxed grains, with the average grain size of 34.83 μm. The grain in the heat affected zone was fine, with the average grain size of 10.21 μm, and there existed recovery and recrystallization. The hardness of the welded joint was between 75 and 90 HV, and that of the fusion zone was the lowest, which was 84.6% of the base metal. The average tensile strength of the welded joint was 291 MPa, which was 84.2% of that of the base metal. The fracture position of the tensile specimen was near the fusion zone, and the fracture showed ductile fracture characteristic.
    • FullText(HTML)
    • References (10)
  • 段凯扬, 戈兆文. 焊接工艺评定国际新趋势—焊接经验评定与标准焊接工艺规程[J]. 压力容器, 2020, 37(5): 52 − 57. doi: 10.3969/j.issn.1001-4837.2020.05.009

    Duan Kaiyang, Ge Zhaowen. New international tendency in welding procedure qualification: previous welding experience and standard welding procedure specification[J]. Pressure Vessel Technology, 2020, 37(5): 52 − 57. doi: 10.3969/j.issn.1001-4837.2020.05.009
    雷振, 徐良, 王旭友, 等. 激光-电弧复合焊接技术国内研究现状及典型应用[J]. 焊接, 2018(12): 1 − 6.

    Lei Zhen, Xu Liang, Wang Xuyou, et al. Typical applications and research status of laser-arc hybrid welding technology[J]. Welding & Joining, 2018(12): 1 − 6.
    韩晓辉, 李帅贞, 毛镇东, 等. 高速列车用6106-T6铝合金型材激光-电弧复合焊接工艺及接头性能[J]. 中国激光, 2019, 46(12): 86 − 94.

    Han Xiaohui, Li Shuaizhen, Mao Zhendong, et al. Laser-arc hybrid welding process and joint properties of 6106-T6 aluminum alloy profiles for high-speed trains[J]. Chinese Journal of Lasers, 2019, 46(12): 86 − 94.
    雷振, 常云峰, 徐富家, 等. 高速列车6N01铝合金型材激光-MIG复合填丝焊接技术[J]. 焊接, 2019(5): 18 − 22.

    Lei Zhen, Chang Yunfeng, Xu Fujia, et al. Laser-MIG hybrid wire filling welding technology for 6N01 aluminum alloy profile of high speed train[J]. Welding & Joining, 2019(5): 18 − 22.
    董晓晶, 李桓, 杨立军, 等. 铝合金多股复合焊丝脉冲MIG焊接接头组织与性能分析[J]. 焊接学报, 2019, 40(11): 61 − 67. doi: 10.12073/j.hjxb.2019400289

    Dong Xiaojing, Li Huan, Yang Lijun, et al. Microstructure and mechanical properties of pulse MIG aluminum alloy welded joints by means of a novel multi-strands composite welding wire[J]. Transactions of the China Welding Institution, 2019, 40(11): 61 − 67. doi: 10.12073/j.hjxb.2019400289
    Chen Yong, Fang Chenfu, Yang Zhidong, et al. Cable-type welding wire arc welding[J]. Springer London, 2018, 94(1): 835 − 844.
    徐锴, 武鹏博, 黄瑞生, 等. 多股绞合焊丝研究与应用进展[J]. 焊接, 2020(7): 6 − 18.

    Xu Kai, Wu Pengbo, Huang Ruisheng, et al. Research and application progress of multi-strand welding wire[J]. Welding & Joining, 2020(7): 6 − 18.
    杨志东. 缆式焊丝气保焊电弧旋转及熔滴过渡行为研究[D]. 镇江: 江苏科技大学, 2018.

    Yang Zhidong. Study on arc rotation and droplet transfer behavior of cable-type welding wire GMAW[D]. Zhenjiang: Jiangsu University of Science and Technology, 2018.
    Yang Zhidong, Fang Chenfu, Wu Mingfang et al. The mechanisms of arc coupling and rotation in cable-type welding wire CO2 welding[J]. Journal of Materials Processing Technology, 2018, 255: 443 − 450. doi: 10.1016/j.jmatprotec.2017.12.032
    徐锴, 武鹏博, 梁晓梅, 等. 铝合金激光-多股绞合焊丝MIG复合焊特性分析[J]. 焊接学报, 2021, 42(1): 16 − 23. doi: 10.12073/j.hjxb.20201120003

    Xu Kai, Wu Pengbo, Liang Xiaomei, et al. Analysis of characteristic of aluminum alloy laser multi strand welding wire MIG hybrid welding[J]. Transactions of the China Welding Institution, 2021, 42(1): 16 − 23. doi: 10.12073/j.hjxb.20201120003
    • Related Articles

  • Related Articles

    [1]XU Kai, WU Pengbo, LIANG Xiaomei, CHEN Jian, HUANG Ruisheng. Analysis of characteristics of aluminum alloy laser multi stranded welding wire MIG hybrid welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(1): 16-23. DOI: 10.12073/j.hjxb.20201120003
    [2]DONG Xiaojing, LI Huan, YANG Lijun, LIANG Yu. Microstructure and mechanical properties of pulse MIG aluminum alloy welded joints by means of a novel multi-strands composite welding wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(11): 61-67. DOI: 10.12073/j.hjxb.2019400289
    [3]CHANG Yunfeng, LEI Zhen, WANG Xuyou, YANG Haifeng. Stability of laser-MIG hybrid welding process with filling wire for aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(10): 119-123. DOI: 10.12073/j.hjxb.2018390260
    [4]CHANG Yunfeng, LEI Zhen, WANG Xuyou, TENG Bin. Process of laser-MIG hybrid welding of 2A14 aluminum alloy with filler wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(7): 40-44. DOI: 10.12073/j.hjxb.20161121004
    [5]ZHU Zongtao, ZHU Quanchao, LI Yuanxing, CHEN Hui. Microstructure and mechanical property of A7N01 aluminum alloy welded by laser-MIG hybrid method with assisting ultrasonic vibration[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(6): 80-84.
    [6]CAI Hua, LIN Kaili, XIAO Rongshi. Process and microstructure properties of laser beam welding of thin 2524 aluminum alloy sheet with filler wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(4): 24-28.
    [7]YUAN Lei, HUA Xueming, ZHANG Wang, LI Fang, WU Yixiong. Phenomena of wire melting and bead formation in AC pulse MIG welding of aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (10): 92-96.
    [8]LU Lihui, SHI Yu, HUANG Jiankang, FAN Jiawei, FAN Ding. Vision sensing and control for wire extension in pulsed MIG welding of aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (7): 63-66.
    [9]YAO Wei, WANG Zhimin, LI Hongwei, WANG Chunming. Double-layers laser-MIG hybrid welding method in welding thick aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (7): 21-24.
    [10]SHI Yu, HUANG Jiankang, FAN Ding, XUE Cheng. Vision-based identification model and extracting algorithm of wire extension in aluminum MIG alloy welding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (8): 1-4.

Catalog

    Get Citation
    PDF
    XML
    Article views (378) PDF downloads (85) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return