Advanced Search
WANG Shun, TONG Jinzhong, HAN Hongbiao. An automatic control device of contact force for electro-spark deposition and deposition test[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(3): 42-47. DOI: 10.12073/j.hjxb.20201108001
Citation: WANG Shun, TONG Jinzhong, HAN Hongbiao. An automatic control device of contact force for electro-spark deposition and deposition test[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(3): 42-47. DOI: 10.12073/j.hjxb.20201108001
shu

An automatic control device of contact force for electro-spark deposition and deposition test

  • 1.

    Henan University of Science and Technology, Luoyang 471003，China

  • 2.

    Sinopec Huabei Oilfield Service Corporation, Zhengzhou 450006, China

More Information
  • Received Date: November 07, 2020
  • Available Online: April 22, 2021
    Graphical Abstract
    • Abstract
  • An automatic control device of contact force for electro-spark deposition was designed to study the influence of contact force on electro-spark deposition. Automatic deposition with different contact forces was tested. The deposition efficiency, mass transfer efficiency, surface morphology of deposited layer and the number of various discharge waveforms under different test conditions were analyzed. The results show that when the contact force is 1.0 N, the maximum deposition efficiency and mass transfer efficiency are achieved, and the surface quality of the deposited layer is also good. The automatic control device for the contact force of electro-spark deposition can maintain the contact force between the electrode and the workpiece, so as to keep automatic electrode feeding. The change of contact force will change the contact status between the electrode and workpiece. With the increase of the contact force, sparks and splashes produced in automatic deposition decrease, and the short-circuit discharges increase while the contact discharges decrease, thus affecting the automatic deposition efficiency and the quality of deposited layer. Under certain test conditions, selecting the appropriate contact force can improve the deposition efficiency and mass transfer efficiency, and obtain a better quality of the deposited layer.
    • FullText(HTML)
    • References (15)
  • 辛昊, 王海涛, 高立, 等. 电火花沉积技术研究现状及其发展[J]. 热加工工艺, 2018, 47(20): 25 − 29.

    Xin Hao, Wang Haitao, Gao Li, et al. Research status and development of electric-spark deposition technology[J]. Hot Working Technology, 2018, 47(20): 25 − 29.
    罗成, 董仕节, 熊翔, 等. 电火花沉积表面处理技术的应用进展[J]. 表面技术, 2009, 38(4): 53 − 56. doi: 10.3969/j.issn.1001-3660.2009.04.019

    Luo Cheng, Dong Shijie, Xiong Xiang, et al. Application progress of electrospark deposition surfacing technology[J]. Surface Technology, 2009, 38(4): 53 − 56. doi: 10.3969/j.issn.1001-3660.2009.04.019
    Kuptsov K A, Sheveyko A N, Zamulaeva E I, et al. Two-layer nanocomposite WC/a-C coatings produced by a combination of pulsed arc evaporation and electro-spark deposition in vacuum[J]. Materials & Design, 2019, 167: 107645.
    Liu Y, Wang D P, Deng C Y, et al. Novel method to fabricate Ti-Al intermetallic compound coatings on Ti-6Al-4V alloy by combined ultrasonic impact treatment and electrospark deposition[J]. Journal of Alloys and Compounds, 2015, 628: 208 − 212. doi: 10.1016/j.jallcom.2014.12.144
    Yue T M, Liu J W. Magnetic-aided electrospark deposition[J]. The International Journal of Advanced Manufacturing Technology, 2019, 105: 1507 − 1517. doi: 10.1007/s00170-019-04383-w
    王彦芳, 司爽爽, 宋增金, 等. 电火花沉积非晶涂层的组织结构与摩擦磨损性能[J]. 焊接学报, 2018, 39(7): 121 − 124. doi: 10.12073/j.hjxb.2018390188

    Wang Yanfang, Si Shuangshuang, Song Zengjin, et al. Microstructure and tribology behaviors of Zr-based amorphous coating on ZL101 by electro-spark deposition[J]. Transactions of the China Welding Institution, 2018, 39(7): 121 − 124. doi: 10.12073/j.hjxb.2018390188
    魏祥, 陈志国, 钟掘, 等. 电火花沉积制备Fe-8B-Mo非晶涂层的可行性[J]. 中国表面工程, 2016, 29(5): 16 − 23. doi: 10.11933/j.issn.1007-9289.2016.05.002

    Wei Xiang, Chen Zhiguo, Zhong Jue, et al. Feasibility on preparation of Fe-8B-Mo amorphous coatings by electrospark deposition[J]. China Surface Engineering, 2016, 29(5): 16 − 23. doi: 10.11933/j.issn.1007-9289.2016.05.002
    Wei X, Chen Z, Zhong J, et al. Facile preparation of nanocrytaline Fe2B coating by direct electro-spark deposition of coarse-grained Fe2B electrode material[J]. Journal of Alloys and Compounds, 2017, 717: 31 − 40.
    Hong X, Tan Y, Wang X, et al. Microstructure and wear resistant performance of TiN/Zr-base amorphous-nanocrystalline composite coatings on titanium alloy by electrospark deposition[J]. Surface & Coatings Technology, 2016, 305: 67 − 75.
    Wang X R, Wang Z Q, Li W S, et al. Preparation and microstructure of CuNiTiZr medium-entropy alloy coatings on TC11 substrate via electrospark-computer numerical control deposition process[J]. Materials Letters, 2017, 197: 143 − 145. doi: 10.1016/j.matlet.2017.03.109
    Frangini S, Masci A. A study on the effect of a dynamic contact force control for improving electrospark coating properties[J]. Surface & Coatings Technology, 2010, 204(16): 2613 − 2623.
    高莹, 韩敬华, 娄丽艳, 等. 电极力对Cr12MoV电火花沉积YG6工艺影响[J]. 焊接学报, 2014, 35(1): 45 − 48.

    Gao Ying, Han Jinghua, Lou Liyan, et al. Influence of electrode pressure on Cr12MoV electric-spark depositing YG6 process[J]. Transactions of the China Welding Institution, 2014, 35(1): 45 − 48.
    Alexander V R, Orhan S. The use of bipolar current pulses in electrospark alloying of metal surfaces[J]. Surface and Coatings Technology, 2003, 168(2): 129 − 135.
    金柏冬, 曹国辉, 王振龙, 等. 空气中微细电火花沉积的工艺规律研究[J]. 中国机械工程, 2006, 17(2): 111 − 115. doi: 10.3321/j.issn:1004-132X.2006.02.001

    Jin Baidong, Cao Guohui, Wang Zhenlong, et al. Research on processing law of micro-EDD in air[J]. China Mechanical Engineering, 2006, 17(2): 111 − 115. doi: 10.3321/j.issn:1004-132X.2006.02.001
    韩红彪, 郭敬迪, 焦文清. 旋转电极电火花沉积/堆焊的放电机理[J]. 焊接学报, 2019, 40(5): 67 − 72. doi: 10.12073/j.hjxb.2019400129

    Han Hongbiao, Guo Jingdi, Jiao Wenqing. Discharge mechanism of electro-spark deposition with rotary electrode[J]. Transactions of the China Welding Institution, 2019, 40(5): 67 − 72. doi: 10.12073/j.hjxb.2019400129
    • Related Articles

  • Related Articles

    [1]ZHENG Guangzhen, HAN Hongbiao, WANG Rui, ZHANG Peng. Electrode wobble technology of electro-spark deposition based on orthogonal tests[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2025, 46(3): 43-50, 136. DOI: 10.12073/j.hjxb.20231215001
    [2]LE Jian, LI Fayuan, SHU Zhiheng, ZENG Mingru, ZHANG Hua. Welding current and voltage detection and control method based on visual sensing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(11): 85-89. DOI: 10.12073/j.hjxb.20240705002
    [3]HOU Yujie, HAN Hongbiao, YANG Xin, ZHENG Guangzhen. Development of a closed loop control system for discharge parameters of electric spark deposition[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(9): 53-59. DOI: 10.12073/j.hjxb.20221122003
    [4]LI Mengnan, HAN Hongbiao, LI Shikang, HOU Yujie. Effect of rotating electrode contact force on discharge parameters and material transfer in electric-spark deposition[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(1): 71-77. DOI: 10.12073/j.hjxb.20220206001
    [5]WANG Shun, HAN Hongbiao, LI Shikang, LI Mengnan. Analysis of the influence of cylindrical electrode parameters on electro-spark deposition quality based on orthogonal experiment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(7): 37-43. DOI: 10.12073/j.hjxb.20210131002
    [6]HAN Hongbiao, GUO Jingdi, JIAO Wenqing. Discharge mechanism of electro-spark deposition with rotary electrode[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(5): 67-72. DOI: 10.12073/j.hjxb.2019400129
    [7]HAN hongbiao, LI Xiangyang. Digital control of capacitance charge-discharge pulse in electro-spark deposition power supply[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(3): 23-26，70.
    [8]GAO Ying, HAN Jinghua, LOU Liyan, LI Huan. Influence of electrode pressure on Cr12MoV electric-spark depositing YG6 process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(1): 45-48.
    [9]LI Zhenying, DAI Liping, HOU Ming, HE Qiong. Automatic control of open arc surfacing system for the milling roller[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (4): 82-84.
    [10]YANG Li-jun, LI Huan, HU Sheng-gang, LI Jun-yue. Pulsed MIG Welding Inverter Power Source by Spectral and Control System[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (1): 41-44.

  • Cited by

    Periodical cited type(5)

    1. 张仁航，李帅贞，汪认，何建英，许骏，孙晓红，冷康龙. 全熔透与部分熔透十字接头疲劳性能对比分析. 金属加工(热加工). 2021(03): 45-48 .
    2. 周松，查涛，黄研清，安金岚，回丽，王磊. 典型高速列车用6N01铝合金焊接接头的微观组织及疲劳性能. 中国有色金属学报. 2021(05): 1253-1260 .
    3. 杜亚芳，王东坡，刘秀国，龚宝明，邓彩艳. T形接头承载角焊缝根部裂纹扩展角度. 焊接学报. 2021(09): 21-27+98 . 本站查看
    4. 张军，张凤梅，周韶泽. 惯性载荷作用下结构应力法焊接结构抗疲劳性能研究. 大连交通大学学报. 2019(01): 40-45 .
    5. 王苹，米莉艳，于谊飞，董平沙. 7N01铝合金十字接头抗疲劳设计. 焊接学报. 2019(10): 20-24+161-162 . 本站查看

    Other cited types(5)

Catalog

    Get Citation
    PDF
    XML
    Article views (348) PDF downloads (11) Cited by(10)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return