Advanced Search
ZHENG Shaoxian, LI Yenan, SHI Wei, ZHAO Xilong. Microstructures and mechanical properties of welding joint of Q235/1Cr18Ni9Ti dissimilar steel with ultra-narrow-gap welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(8): 38-43. DOI: 10.12073/j.hjxb.2019400206
Citation: ZHENG Shaoxian, LI Yenan, SHI Wei, ZHAO Xilong. Microstructures and mechanical properties of welding joint of Q235/1Cr18Ni9Ti dissimilar steel with ultra-narrow-gap welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(8): 38-43. DOI: 10.12073/j.hjxb.2019400206
shu

Microstructures and mechanical properties of welding joint of Q235/1Cr18Ni9Ti dissimilar steel with ultra-narrow-gap welding

  • 1.

    Lanzhou Jiaotong University, Lanzhou 730070, China

  • 2.

    Lanzhou LS Test Technology Co., Ltd., Lanzhou 730314, China

More Information
  • Received Date: September 05, 2018
    Graphical Abstract
    • Abstract
  • Dissimilar steels with thick wall welded by ultra-narrow-gap welding have some extra advantages in increasing welding efficiency, reducing production costs, improving mechanical properties of joint. In the paper, microstructures and mechanical properties of welding joint of Q235/1Cr18Ni9Ti dissimilar steels with ultra-narrow-gap welding were studied. The results indicated that welding pool of backing weld solidified with the FA solidification mode, and solidification microstructures were made of fine equiaxed grains of austenites and a few dendritic ferrites. Welding pool of filling bead and cover pass near the transition region of fusion solidified with the AF solidification mode, solidification microstructures are made of cellular austenites and ferrites between cellular austenites, welding pool of filling bead and cover pass far away from the transition region of fusion can solidify with the FA solidification mode, and solidification microstructures were made of columnar dendrite of austenites and a few skeleton ferrites. Ultra-narrow-gap welding joint of dissimilar steel had excellent tensile strength and bending property, and the heat affected zone near the Q235 base metal can not soften. Impact toughness of the transition region of fusion and the heat affected zone near the Q235 base metal was better than that of weld zone.
    • FullText(HTML)
    • References (11)
  • Dupont J N. Microstructural evolution and high temperature failure of ferritic to austenitic dissimilar welds[J]. International Materials Reviews, 2012, 57(4):208-234.
    郑云蔚,蔡志鹏,何雨晨,等.异种钢窄间隙焊母材熔合比对碳迁移现象影响的研究[J].机械工程学报, 2016, 52(12):74-80 Zheng Yunwei, Cai Zhipeng, He Yuchen, et al. Study on the influence of fusion ratio on carbon migration phenomenon in the narrow gap welding of dissimilar steels[J]. Journal of Mechanical Engineering, 2016, 52(12):74-80
    Nelson T W, Lippold J C, Mills M J. Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar metal welds-part2:on-cooling transformations[J]. Welding Journal, 2000(10):267-277.
    杜兵,李彦,贾玉力.异种钢接头熔合区的脆化与断裂行为[J].焊接学报, 1998, 19(1):8-12 Du Bing, Li Yan, Jia Yuli. Embrittlement and fracture behavior of fusion zone in dissimilar steel welded joints[J]. Transactions of the China Welding Institution, 1998, 19(1):8-12
    Verena W, Bernhard D, Silvia H, et al. Investigations of dissimilar welds of the temperature steels P91 and PM2000[J]. Fusion Engineering and Design, 2013(88):2539-2542.
    Ming H, Zhang Z, Wang J, et al. Microstructural characterization of an SA508-309L/308L-316L domestic dissimilar metal welded safe-end joint[J]. Materials Characterization, 2014(97):101-115.
    王瑞,王凤会,田华明,等.低碳钢与不锈钢焊接接头弯曲性能的分析[J].焊接学报, 2013, 34(2):58-62 Wang Rui, Wang Fenghui, Tian Huaming, et al. Analysis of dissimilar steels welded joints[J]. Transactions of the China Welding Institution, 2013, 34(2):58-62
    范成磊,孙清洁,赵博,等.双丝窄间隙熔化极气体保护焊的焊接稳定性[J].机械工程学报, 2009, 45(7):265-269 Fan Chenglei, Sun Qingjie, Zhao Bo, et al. Stability of double wires narrow-gap gas metal arc welding[J]. Journal of Mechanical Engineering, 2009, 45(7):265-269
    郑韶先,时哲,韩峰,等.超细颗粒焊剂约束电弧超窄间隙焊接1Cr18Ni9Ti不锈钢的焊缝成形分析[J].焊接学报, 2015, 36(2):67-70 Zheng Shaoxian, Shi Zhe, Han Feng, et al. Ultra-narrow-gap weld of 1Cr18Ni9Ti stainless steel with constricted arc by ultra-fine granular flux[J]. Transactions of the China Welding Institution, 2015, 36(2):67-70
    Zheng S, Li X, Che J, et al. Weld formation and heating mechanism in ultra-narrow gap with constricted arc by ultra-fine granular flux[J]. China Welding, 2012, 21(1):39-43.
    李增荣. Q235钢与1Cr18Ni9Ti不锈钢异种钢焊接接头性能的研究[J].中国新技术新产品, 2012(21):21 Li Zengrong. Research of mechanical property of dissimilar steel joint of Q235/1Cr18Ni9Ti[J]. China New Technologies and Products, 2012(21):21
    • Related Articles

  • Related Articles

    [1]LI Dongjie, LI Qian, WANG Shiwei, YOU Bo. Design of new welding torch for automatic welding of all position intersecting line[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(3): 117-119，123. DOI: 10.12073/j.hjxb.2018390081
    [2]SHEN Chunlong, YU Jingbao, PENG Yong, WANG Kehong. Parametric modeling and vector graphics plotting for welding joint groove[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (11): 17-20.
    [3]XU Lianyong, JING Hongyang, AN Junchao, XU Delu, HAN Yu, CHEN Yucheng. Creep constitutive equations of P92 steel welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (12): 29-32.
    [4]YAN Yanfu, JI Lianqing, ZHANG Keke, YAN Hongxin, FENG Lifang. Foundation of steady state creep constitutive equation of SnCu soldered joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (9): 75-79.
    [5]HUO Meng-you, WANG Xin-gang, YIN Ping. Real-time interpolation algorithm and simulation of seam of intersection line for automatic welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (11): 37-40.
    [6]LUO Zhen, SHAN Ping, ZHENG Zhen-tai, SHI Tao. Stable distribution analysis to statistical evaluation of contact resistance in aluminum alloy spot welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (4): 9-12.
    [7]WU Hua-zhi, GUO Hai-ding, GAO De-ping, XU kai-wang. Establishment of fatigue Fractal damage evolution equation on TC11 Ti alloy welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (12): 93-95,107.
    [8]WANG Da yong, FENG Ji cai. Obtaining of Young Equation by Principle of Energy and Establishment of Wetting Angle Model[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (6): 59-61.
    [9]WANG Zheng, GAO Quan-xue, PI Tao, WEN Jin-song. A Three-dimensional Parametric CAD of Welding Fixture Under Windows[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (4): 69-72.
    [10]Du Suigeng, Liu Xiaowen, Wu Shichun, Li Xiaoxia. Plastic Flow Equation of Weld Metal during Quasi-steady Friction Stage[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1999, (4): 219-224.

Catalog

    Get Citation
    PDF
    XML
    Article views (612) PDF downloads (97) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return