Advanced Search

column
Progress on the control of intermetallic compounds in aluminum/steel friction stir welding
MA Xiaotian, YAN Dejun, MENG Xiangchen, WAN Long, HUANG Yongxian
2020, 41(7): 1-11. DOI: 10.12073/j.hjxb.20200617001
[Abstract] [PDF]
Effect mechanism of dilution on solidification crack in ENiCrFe-7 buffering layer of deposited metal
YAN Yingjie, ZHANG Kaijia, WANG Ruomeng, JIANG Yong, CAO Rui, CHEN Jianhong
2020, 41(7): 12-17. DOI: 10.12073/j.hjxb.20200202001
[Abstract] [PDF]
Analysis on fatigue characteristics of spot welded joints of stainless steel car body
YANG Long, YANG Bing, YANG Guangwu, XIAO Shoune, ZHU Tao, WANG Feng
2020, 41(7): 18-24. DOI: 10.12073/j.hjxb.20191204005
[Abstract] [PDF]
Investigation on the radiation resistance of quenching and tempering CLAM steel weld
LEI Yucheng, LIU Dan, YAO Yiqiang, DING Xiangbin, ZHU Qiang
2020, 41(7): 25-31. DOI: 10.12073/j.hjxb.20200528001
[Abstract] [PDF]
Microstructure and properties of nickel-based single crystal superalloy brazed joints
SUN Yuan, ZHAO Xu, SU Jin, HOU Xinyu, WANG Shiyang, DING Yuantian
2020, 41(7): 32-38. DOI: 10.12073/j.hjxb.20200410002
[Abstract] [PDF]
Microstructure investigation and residual stress numerical simulation on welded joint of 304/Q345R composite plate
HU Xiaodong, WANG Jitao, YANG Yicheng, SONG Ming, QI Pengfei
2020, 41(7): 39-45. DOI: 10.12073/j.hjxb.20190915001
[Abstract] [PDF]
Effect of Ga2O3 on of microstructure and properties of brazed joints obtained by Ag30CuZnSn flux cored brazing filler metal and brass
PU Juan, XUE Songbai, WU Mingfang, LONG Weimin, WANG Shuiqing, LIN Tiesong
2020, 41(7): 46-52. DOI: 10.12073/j.hjxb.20200324002
[Abstract] [PDF]
Effect of powder addition ratio on the microstructure and abrasive wear resistance of hardfacing alloys deposited by composite powder particles and solid wire
GONG Jianxun, YAO Huiwen, CHENG Shiyao, LIU Chao, HUANG Hongjiang
2020, 41(7): 53-58. DOI: 10.12073/j.hjxb.20200429002
[Abstract] [PDF]
Welding deviation measurement method based on welding torch contour feature extraction
WANG Zhongren, WANG Xiaogang, LIU Dezheng, LIU Haisheng
2020, 41(7): 59-64. DOI: 10.12073/j.hjxb.20191026002
[Abstract] [PDF]
Parameter optimization of laser cladding ceramic repair layer of H13 steel
LIU Lijun, LIU Dayu, WANG Xiaolu, LI Jiqiang, CUI Yuanbiao, JIA Zhixin
2020, 41(7): 65-70. DOI: 10.12073/j.hjxb.20200508002
[Abstract]
Microstructure and microhardness analysis of laser welded dissimilar steel
YIN Yan, KANG Ping, LU Chao, ZHANG Yuan, ZHANG Ruihua
2020, 41(7): 71-77. DOI: 10.12073/j.hjxb.20191227002
[Abstract] [PDF]
Microstructure and shear strength of the C/SiC and Q235 brazing joints
ZHANG Yukun, CHEN Jichun, ZHANG Jinsong
2020, 41(7): 78-82. DOI: 10.12073/j.hjxb.20191010001
[Abstract] [PDF]
Failure analysis and control of gold-plated lead solder joint cracks
CAO Rui, WU Yaning, NI Xiaoliang, WANG Zhibin, WANG Xu
2020, 41(7): 83-90. DOI: 10.12073/j.hjxb.20200319004
[Abstract] [PDF]
Microstructure and low temperature toughness of HAZ of domestic 06Ni9DR Steel
LI Liying, WANG Xiaolei, LIU Zhenhong, ZHOU Cong, HAN Bin
2020, 41(7): 91-96. DOI: 10.12073/j.hjxb.20200202002
[Abstract] [PDF]