Advanced Search

Online First

Online first articles have been peer-reviewed and accepted, which are not yet assigned to volumes/issues, but are citable by Digital Object Identifier (DOI).
Research progress on laser joining of brittle transparent materials
PAN Rui, FENG Yinghao, CHEN Pei, CHEN Shujun, JIANG Fan, YANG Jin, LI Peng
DOI: 10.12073/j.hjxb.20240129003
[Abstract] [PDF]
Formation mechanism of the steel/nickel heterogeneous metal interwoven by the arc additive manufacturing process
ZHANG Benshun, ZHANG Zheng, SUN Hongwei, MIAO Yugang, ZHAO Yuyang, LIU Yu
DOI: 10.12073/j.hjxb.20240321003
[Abstract] [PDF]
Quality Control and Reliability of PQFP Device Solder Joints
ZHANG Wei, LIU Kunpeng, XIANG Gang, ZHANG Yunxuan, YU Muying, WANG Shang, TIAN Yanhong
DOI: 10.12073/j.hjxb.20240416001
[Abstract] [PDF]
A semi physical and semi intelligent heat source model based on keyhole heat transfer and energy decay
HU Guangxu, GAO Jing, LIU Yang, DING Renjie, GONG Qingtao
DOI: 10.12073/j.hjxb.20240527002
[Abstract] [PDF]
Microstructure evolution of 2195 Al-Li alloy friction stir welded joint and enhancing performance by laser shock peening
SHEN Kexin, ZHANG Sicong, ZHAO Yue, LI Quan, WAN Zhandong, WU Aiping
DOI: 10.12073/j.hjxb.20240226002
[Abstract] [PDF]
Effect of Ce content on the microstructure and its evolution of the deposited metal in submerged arc welding of 1000 MPa grade high strength steel
LI Chunjian, XU Kai, LIU Xin, HAO Qianyu, FENG Wei, ZHAO Jiangyao
DOI: 10.12073/j.hjxb.20250227001
[Abstract] [PDF]
Impact toughness influence law and weldability analysis of 800 MPa grade steel for photovoltaic brackets
ZHANG Yonglin, CHENG Huichao, YANG Haifeng, LIU Ning, LIANG Yuandong
DOI: 10.12073/j.hjxb.20240428001
[Abstract] [PDF]
Analysis of the microstructure and mechanical properties of the interface between diamond and oxygen free copper brazing joints
LI Yulong, SONG Ziming, WU Qi, LIN Wei, ZHANG Lin, PAN Pan, LEI Min
DOI: 10.12073/j.hjxb.20240415001
[Abstract] [PDF]
Reliability optimization of solder joints in large-sized COTS devices based on solder mask layer design
LI Geng, WANG Shang, SUN Yuxin, MENG Junhao, WU Wenzhi, TIAN Yanhong
DOI: 10.12073/j.hjxb.20240319003
[Abstract] [PDF]
Prediction of GTAW penetration state based on enhanced knowledge of dynamic morphology molten pool
HONG Yuxiang, XIE Xiangzhi, HE Xingxing, DU Dong, CHANG Baohua
DOI: 10.12073/j.hjxb.20240115003
[Abstract] [PDF]
Enhancing mechanical properties and corrosion resistance through coating SiC during wire arc additive manufacturing of 2205 duplex stainless steel
WANG Haidong, XU Shuang, LIU Jili, LI Xide, QIU Dawei
DOI: 10.12073/j.hjxb.20240203002
[Abstract] [PDF]
Physical characteristics and stable combustion mechanism of coupled tetra-tungsten TIG arc
LIANG Xiaomei, DU Bing, ZHOU Xin, TENG Bin, HUANG Ruisheng, ZHANG Yandong, CHEN Xiaoyu
DOI: 10.12073/j.hjxb.20241115002
[Abstract] [PDF]
Research progress on the improvement of electrode lifespan of spot welding for aluminum alloy
PAN Xiaoqian, LIU Pengpeng, LUO Lin, BAI Qingwei, QU Miaojin, WANG Xiaoling, LIU Shengxiang
DOI: 10.12073/j.hjxb.20240218001
[Abstract] [PDF]
Microstructure and corrosion properties of 625 Ni-based alloy surfacing layer on the inner-wall material by twin tungsten electrode TIG welding with heat wire
PU Juan, SHI Sutong, WEI Hongbing, WU Mingfang, SUN Huawei, LONG Weimin
DOI: 10.12073/j.hjxb.20240207001
[Abstract] [PDF]
Degradation behavior and mechanisms of strength and toughness in double-wire narrow-gap submerged arc welded joints of 2.25Cr-1Mo-0.25V steel thick plates for hydrogenation reactors
WAN Yu, ZHANG Xuyang, JIANG Wenchun, ZHANG Baisheng, LEI Chenglong, LI Zhijie
DOI: 10.12073/j.hjxb.20240706001
[Abstract] [PDF]
Optimization of local dry underwater laser welding process for stainless steel based on orthogonal experiment
LI Xingshuai, ZHANG Qinghua, ZHAO Yongqing, CHEN Yingjie, SUN Qingjie, LIU Yibo, TIAN Yifeng
DOI: 10.12073/j.hjxb.20240131001
[Abstract] [PDF]
Liquid-phase assisted diffusion bonding of 6063 Al-alloy with AlSiMgCu brazing material
HU Ruoqi, ZHANG Junjie, WANG Ying, ZHANG Dongxue, MU Ruijie, YANG Zhenwen
DOI: 10.12073/j.hjxb.20240320002
[Abstract] [PDF]
Online inspection technology for weld formation quality of welded structural components
WANG Hao, CHI Yupeng, FANG Rongchao, CHEN Chao, ZHAO Xiaohui
DOI: 10.12073/j.hjxb.20240409002
[Abstract] [PDF]
Interfacial microstructure and mechanical property of Ti60 and Ti2AlNb joint brazed with TiZrNiCu filler metal
XU Jingxin, HU Shengpeng, SONG Xiaoguo, CHEN Xu, BIAN Hong, CAO Jian, SHEN Yuanxun
DOI: 10.12073/j.hjxb.20240330001
[Abstract] [PDF]
The microstructure and mechanical properties of CMT-WAAM Al-5%Mg alloy with interlayer ultrasonic impact combined
ZHOU Le, CHEN Furong, CAO Silong, SUN Zhenbang
DOI: 10.12073/j.hjxb.20240914001
[Abstract] [PDF]
Transient liquid phase bonding of Mg/Al dissimilar alloys with auxiliary pulse current Process research
WANG Han, CHEN Menghe, XIE Lansheng, FENG Rui, OUYANG Jindong
DOI: 10.12073/j.hjxb.20240304001
[Abstract] [PDF]
The influence of welding thermal cycle on the grain structure of friction stir welded 5083 aluminum alloy joint
XU Nan, XU Yuzhui, GAO Tianxu, SONG Qining, BAO Yefeng
DOI: 10.12073/j.hjxb.20240315001
[Abstract] [PDF]
Numerical simulation of hybrid additive and subtractive manufacturing and evolution behavior of stress and deformation
CHEN Shujun, NI Qingmian, LIU Haibin, CHEN Pingping, YAN Chaoyang, XIE Ruishan
DOI: 10.12073/j.hjxb.20240131002
[Abstract] [PDF]
Study on the organization, strengthening and toughening of 1000 MPa grade deposited metals under different welding methods
CAO Zhilong, AN Tongbang, ZUO Yue, ZENG Daoping, MA Chengyong, PENG Yun
DOI: 10.12073/j.hjxb.20240305001
[Abstract] [PDF]
Radiographic Detection of Welding Defects Based on Neural Ordinary Differential Equations
WU Wenyong, CHENG Hongyu, ZHANG Qican
DOI: 10.12073/j.hjxb.20241031001
[Abstract] [PDF]
Effect of tempering treatment on the microstructure and properties of supermartensitic stainless steel deposited metal
JIAO Shuaijie, WANG Guofu, CHEN Bo, GUO Xuchao, BI Yanping, HAN Ying, LIU Manyu
DOI: 10.12073/j.hjxb.20240703001
[Abstract] [PDF]
σ-phase precipitation in weld metal of austenitic stainless steels and its effect on properties
GUO Xuchao, ZHANG Xuegang, JIAO Shuaijie, WANG Meng, CHEN Yan, SUN Tingting, HU Pengliang
DOI: 10.12073/j.hjxb.20240401002
[Abstract] [PDF]
Title: Vacuum diffusion bonding of TC4 titanium alloy to 316L stainless steel with AlCoCrNiCuAg high-entropy alloy interlayer
ZHAO Chenhao, LI Peng, LI Chao, WANG Yinchen, DONG Honggang
DOI: 10.12073/j.hjxb.20240328001
[Abstract] [PDF]
Strengthing and toughening mechanism of weld metal of 690 MPa grade high strength steel
KANG Tianyou, SUN Lei, WANG Xinghua, ZHANG Yuxiang, WANG Renfu, ZHANG Youjing
DOI: 10.12073/j.hjxb.20240108001
[Abstract] [PDF]
Analysis of in-situ heat treatment on microstructure and mechanical properties by quadruple-electrode gas tungsten arc additive manufacturing of 00Cr13Ni5Mo stainless steel
ZHOU Xin, HUANG Ruisheng, LIANG Xiaomei, TENG Bin
DOI: 10.12073/j.hjxb.20240202001
[Abstract] [PDF]
Influence of Wire Feeding Mode on Formation of Single-pass Multilayer Inclined Parts in Laser Wire Additive Manufacturing
HAN Hongbiao, ZHANG Peng, YAN Chenxiao, HU Jiayang
DOI: 10.12073/j.hjxb.20241012001
[Abstract] [PDF]
Microstructure and properties of Inconel 718 cladding layer efficiently fabricated by laser metal deposition with hot wire
SU Guoxing, SHI Yu, ZHU Ming, ZHANG Gang
DOI: 10.12073/j.hjxb.20240628003
[Abstract] [PDF]
Influence of WC addition on the wear resistance mechanism of laser additively manufactured Fe-Mn-Si-Cr-Ni alloys
ZHAO Yufeng, SONG Laidong, WANG Hongyu, JIANG Yinfang, HU Zhanming
DOI: 10.12073/j.hjxb.20240721001
[Abstract] [PDF]
Plastic deformation and microstructures evolution in pure copper ultrasonic welding
LI Huan, LI Jun, LI Zhe, GAO Zhenze, XU Linqian, WANG Shanlin
DOI: 10.12073/j.hjxb.20240704002
[Abstract] [PDF]
The Development Status On Advanced Packaging Copper Pillar Bump Interconnection Technology and Reliability
LIU Xudong, SA Zicheng, FENG Jiayun, LI Haozhe, TIAN Yanhong
DOI: 10.12073/j.hjxb.20240718001
[Abstract] [PDF]
Review on Regualtion Means in Wire Arc Additive Manufacturing of Aluminum Alloy
QI Bojin, CAI Linwei
DOI: 10.12073/j.hjxb.20240515002
[Abstract]
Multi-information fusion welding defect identification combining neighborhood rough set and optimized SVM
FENG Zhiqiang, ZENG Xianping, FANG Naiwen, ZHAO Daidi, LI Quan, LUO Jiutian, LI Xin
DOI: 10.12073/j.hjxb.20240712001
[Abstract] [PDF]
Laser ablation behavior subjected to subsonic airflow at different spatial positions
LIU Xiaoying, WEI Chenghua, HUANG Shuyu, LU Fenggui
DOI: 10.12073/j.hjxb.20240407002
[Abstract] [PDF]
Effect of spiral scanning laser power on arc thermal field in double pulsed CMT
ZHANG Gang, LIU Zhongyi, MENG Xu, SHI Yu, FAN Ding
DOI: 10.12073/j.hjxb.20240617001
[Abstract] [PDF]
Research on automatic classification of spot welding joint strength based on PSO-SVM
WU Gang, CHEN Tian, YU LiangHui, LIU Zhipeng
DOI: 10.12073/j.hjxb.20220829001
[Abstract] [PDF]
Microstructure and mechanical properties of CuCrZr /316LN laser welding joints on HEPS thin wall vacuum box
Wang Xujian, Tan Caiwang, Dong Haiyi, He Ping, Fan Chenglei, Guo Dizhou
DOI: 10.12073/j.hjxb.20220414001
[Abstract] [PDF]
Microstructure and Mechanical Properties of Electron Beam Welded Joints in Different State of TC4
Taiqi Yan, Yu Wu, Xu Cheng, An Li, Shuquan Zhang
[Abstract] [PDF]
Development of a narrow gap welding experiment system for oscillating arc sensing
Wenji Liu, Zhenyu Guan, Liangyu Li, Jianfeng Yue
[Abstract] [PDF]
Laser Welding of T91 Martensite Heat-resistant Steel with Feeding Wire
Xiaoyong Qi, Bing Ye, Shiwen Yu, Liang Yu
DOI: 10.12073/j.hjxb.201940
[Abstract] [PDF]