Microstructure and properties of electron beam welded joints of dissimilar high temperature titanium alloys

GAO Fuyang; GAO Qi; HAN Linju; YU Wei; ZHU Lele; LIU Yinqi

doi:10.12073/j.hjxb.20200706005

TRANSACTIONS OF THE CHINA WELDING INSTITUTION > 2020 > 41(8): 73-78. > DOI: 10.12073/j.hjxb.20200706005

GAO Fuyang, GAO Qi, HAN Linju, YU Wei, ZHU Lele, LIU Yinqi. Microstructure and properties of electron beam welded joints of dissimilar high temperature titanium alloys[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(8): 73-78. DOI: 10.12073/j.hjxb.20200706005

Citation:

PDF (1242 KB)

Microstructure and properties of electron beam welded joints of dissimilar high temperature titanium alloys

GAO Fuyang^{1, 3,},
GAO Qi^{1, 3},
HAN Linju^{1, 3},
YU Wei^{1, 3},
ZHU Lele^{2, 3},
LIU Yinqi^{2, 3}

1.
Luoyang Ship Material Research Institute, Luoyang, 471039, China
2.
Luoyang Shuangrui Precision Casting Titanium Industry Co., Ltd., Luoyang 471039, China
3.
National Local Joint Engineering Research Center of Advanced Titanium and Titanium Alloy Materials Technology, Luoyang, 471039, Cina

More Information

Received Date: July 05, 2020
Available Online: November 04, 2020

Graphical Abstract

Abstract

Abstract

High temperature titanium alloy Ti60 plate and Ti700sr casting were welded by vacuum electron beam welding machine, and the microstructure and mechanical properties of the joint were studied. The results show that the high temperature titanium alloy Ti60 plate and Ti700sr casting have good weldability by electron beam welding, and high quality joint can be obtained. The welding seam in the joint is fine acicular martensite, and there are stacking faults and twins infusion zone of Ti700sr side. The α phasein the HAZ of Ti700sr grow a lot compared with the α phase in the base metal. There are rich rare earth Nd precipitates in the fusion zone and heat affected zone on the Ti60 side. The microhardness of the weld metal is similar to that of Ti60 and Ti700sr, which is about 360 HV. The highest hardness occurs in the heat affected zone of Ti60 side, and the maximum hardness reaches 418 HV. The tensile properties of the joints at 600 and 650 ℃ are 695 and 587 MPa respectively.
- Ti60 alloy,
- Ti700sr alloy,
- electron beam welding,
- microstructure,
- mechanical properties

FullText(HTML)

References (14)

References

赵永庆. 高温钛合金研究[J]. 钛工业进展, 2000(1): 33 − 39. doi: 10.3969/j.issn.1009-9964.2000.01.013

Zhao Yongqing. Research on high temperature titanium alloys[J]. Progress in Titanium Industry, 2000(1): 33 − 39. doi: 10.3969/j.issn.1009-9964.2000.01.013

田永武, 朱乐乐, 李伟东, 等. 高温钛合金的应用及发展[J]. 热加工工艺, 2020, 8: 17 − 20.

Tian Yongwu, Zhu Lele, Li Weidong, et al. Application and development of high temperature titanium alloy[J]. Hot Working Process, 2020, 8: 17 − 20.

魏寿庸, 石卫民, 王鼎春, 等. 600 ℃时高温钛合金(Ti60)的组织与力学性能[J]. 中国有色金属学报, 2010(s1): 801 − 806.

Wei Shouyong, Shi Weimin, Wang Dingchun, et al. Microstructure and mechanical properties of high temperature titanium alloy (Ti60) at 600 ℃[J]. Acta Nonferrous Metals Sinica, 2010(s1): 801 − 806.

万晓慧, 杜欲晓. TC11 钛合金钨极氩弧焊工艺试验研究[J]. 航空制造技术, 2011, 16: 78 − 80. doi: 10.3969/j.issn.1671-833X.2011.22.015

Wan Xiaohui, Du Yuxiao. Experimental study on TIG welding process of TC11 titanium alloy[J]. Aviation Manufacturing Technology, 2011, 16: 78 − 80. doi: 10.3969/j.issn.1671-833X.2011.22.015

Xiong Jinhui, Li Shikai, Gao Fuyang, et al. Microstructure and mechanical properties of Ti6321 alloy welded joint by GTAW[J]. Materials Science and Engineering A, 2015, 640: 419 − 423. doi: 10.1016/j.msea.2015.06.022

李冲健. TA5钛合金TIG焊接工艺及工艺优化模型研究[D]. 大连: 大连理工大学, 2019.

Li Chongjian. Research on TIG welding process and process optimization model of TA5 titanium alloy[D]. Dalian: Dalian University of Technology, 2019.

虞鸿江, 范如意, 黄坚, 等. TC11 高强钛合金激光焊接接头的显微组织与力学性能[J]. 中国有色金属学报, 2015, 1: 1 − 8.

Yu Hongjiang, Fan Ruyi, Huang Jian, et al. Microstructure and mechanical properties of laser welded joint of TC11 high strength titanium alloy[J]. Acta Nonferrous Metals Sinica, 2015, 1: 1 − 8.

Xu Weifeng, Ma Jun, Luo Yuxuan, et al. Microstructure and high-temperature mechanical properties of laser beam welded TC4/TA15 dissimilar titanium alloy joints[J]. Transactions of Nonferrous Metals Society of China, 2020, 30: 160 − 170. doi: 10.1016/S1003-6326(19)65188-5

郭必新. TC4 钛合金的等离子弧焊接工艺研究[M]. 热加工工艺, 2016.

Guo Bixin. Study on plasma arc welding process of TC4 titanium alloy[M]. Hot Working Process, 2016.

高福洋, 高奇, 蒋鹏, 等. 钛合金电子束深熔焊根部缺陷机理分析[J]. 焊接学报, 2018, 39(10): 30 − 34.

Gao Fuyang, Gao Qi, Jiang Peng, et al. Mechanism analysis of root defects in electron beam deep penetration welding of titanium alloy[J]. Transactions of the China Welding Institution, 2018, 39(10): 30 − 34.

陈志勇, 王清江. Ti60电子束焊接接头高温下的失效与变形行为[J]. 金属学报, 2008, 44(3): 263 − 271. doi: 10.3321/j.issn:0412-1961.2008.03.002

Chen Zhiyong, Wang Qingjiang. Failure and deformation behavior of Ti60 electron beam welded joint at high temperature[J]. Acta Metallurica Sinica, 2008, 44(3): 263 − 271. doi: 10.3321/j.issn:0412-1961.2008.03.002

孙峰, 李金山, 寇宏超, 等. Ti60 钛合金α相溶解动力学及固溶组织特征[J]. 中国有色金属学报, 2010(s1): 437 − 441.

Sun Feng, Li Jinshan, Kou Hongchao, et al. Dissolution kinetics and solid solution microstructure of Ti60 titanium alloy[J]. Acta nonferrous metals Sinica, 2010(s1): 437 − 441.

段锐, 蔡建明, 李臻熙. 初生α相含量对近α钛合金TG6 拉伸性能和热稳定性的影响[J]. 航空材料学报, 2007, 27(3): 17 − 22. doi: 10.3969/j.issn.1005-5053.2007.03.004

Duan Rui, Cai Jianming, Li Zhenxi. The effect of primary α phase content on tensile properties and thermal stability of near α titanium alloy TG6[J]. Journal of Aeronautical Materials, 2007, 27(3): 17 − 22. doi: 10.3969/j.issn.1005-5053.2007.03.004

陈国庆. Ti60合金电子束焊接组织及性能研究[C]//中国机械工程学会焊接学会, 第二十次全国焊接会议论文集. 兰州, 2015.

Chen Guoqing. Study on Microstructure and properties of electron beam welding of Ti60 Alloy[C]// Welding Society of China Society of Mechanical Engineering. Proceedings of the 20th National Welding Conference, Lanzhou, 2015.

[1]	HE Qingshan, CUI Zhongming, FU Yucan, WANG Zhixin. Vacuum brazing diamond process under the profile constraint and analysis of agreed height abrasives[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(2): 39-42. DOI: 10.12073/j.hjxb.20191106006
[2]	LU Jinbin, HE Yaxun, ZHANG Wangxi, LI Hua, ZHAO Bin, YIN Zhen, MA Jia. Analysis on vacuum brazing diamond using CuSnTiNi[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(6): 125-128.
[3]	WANG Bo, XIAO Bing, ZHU Yongwei, SHAO Mingjia. Vacuum brazing of diamond with large-grained nickel-based alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(2): 85-88,93.
[4]	YANG Zhibo, XU Jiuhua, LIU Aiju. Analysis on interfacial microstructure of laser brazing diamond grits[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (10): 9-12.
[5]	YUAN Jie, ZHAO Ning, NAN Junma, XU Kewei. Bonding interface of containing-Ti prealloy based CuMn and diamond grit via brazing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (6): 69-72.
[6]	SUN Feng-lian, ZHAO Mi, LI Dan, GU Feng. Interfacial reaction layers and microstructure of brazed joint of CVD diamond film[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (9): 70-72.
[7]	MA Bo-jiang, XU Hong-jun, FU Yu-can, XIAO Bing, XU Jiu-hua. Interfacial characteristics of diamond brazed by high-frequency induction[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (3): 50-54.
[8]	XIAO Bing, XU Hong-jun, WU Zhi-bin, XU Xi-peng. Furnace Brazing of Diamond Grinding Wheel with Ni-Cr Alloy under Vacuum Atmosphere[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (2): 23-26.
[9]	WU Zhi-bin, XU Hong-jun, XIAO Bing. Experimental Investigation on Induction Brazing of Diamond Grinding Wheel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2001, (1): 24-26.
[10]	Sun Fenglian, Yu Yandong, Sun Pingzhong, Zhang Jie, Zhang Jiuhai, Xu Yonghua. Solid-state Bonding of Diamond to Co-Si Alloys[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1997, (3): 177-181.

Cited By

Get Citation

PDF

XML

Article views (765) PDF downloads (26)

Turn off MathJax

Article Contents

Abstract

References

Microstructure and properties of electron beam welded joints of dissimilar high temperature titanium alloys

Abstract

References

Related Articles

Catalog

Microstructure and properties of electron beam welded joints of dissimilar high temperature titanium alloys

Abstract

References

Related Articles

Catalog

Export File

Citation

Format

Content