Advanced Search
DENG Dean, SHOICHI Kiyoshima. Influence of welding sequence on welding residual stress distribution in thick plate joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (12): 55-58.
Citation: DENG Dean, SHOICHI Kiyoshima. Influence of welding sequence on welding residual stress distribution in thick plate joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (12): 55-58.
shu

Influence of welding sequence on welding residual stress distribution in thick plate joint

  • 1.

    College of Materials Science and Engineering, Chongqing University, Chongqing 400045, China

  • 2.

    Research Center of Computational Mechanics, Inc., Tokyo 142-0041, Japan

More Information
  • Received Date: July 05, 2011
    Graphical Abstract
    • Abstract
  • Features of welding residual stress distribution in an austenitic stainless steel thick plate joint were investigated by means of experiment and numerical simulation technology.Through comparing the simulation results and experimental measurements, the prediction accuracy of the developed thermo-elastic-plastic FEM based on Quick Welder was verified. Meanwhile, the influence of welding sequence on the residual stress distribution was clarified using numerical simulation method. The results show that both transverse residual stress and longitudinal residual stress were significantly affected by deposition sequence. The deposition sequence not only largely changes the peak values of residual stress, but also alters the shape of residual stress distribution.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]GUI Xiaoyan, ZHANG Yanxi, YOU Deyong, GAO Xiangdong. Numerical simulation and test for influence of laser arc hybrid welding sequence on 304 stainless steel T-joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(12): 34-39. DOI: 10.12073/j.hjxb.20210324005
    [2]QI Haibo, LI Jiangfei, LIANG Bingchen, REN Deliang. Effects of welding sequence on welding residual deformation in multi-welds plate dryer[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(3): 67-70.
    [3]DONG Wenchao, LU Shanping, LI Dianzhong. Effect of welding sequence on welding distortion of large-sized thin armor steel structure[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(7): 43-46,50.
    [4]WANG Ping, WANG Qiang, LIU Xuesong, FANG Hongyuan. Welding sequence optimization for high-speed rail floor based on FEM[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (8): 45-48.
    [5]LI Chaowen, WANG Yong, HAN Tao. Effect of welding sequences on welding residual stress and distortion of T-joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (10): 37-40.
    [6]ZHANG Xueqiu, YANG Jianguo, LIU Xuesong, CHEN Xuhui, FANG Hongyuan, QU Shen. Finite element anlysis of welding sequence impact on blisk roundness[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (3): 57-60.
    [7]ZHOU Guangtao, LIU Xuesong, YAN Dejun, FANG Hongyuan. Prediction for welding deformation reducing by welding sequence optimization of upper plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (9): 109-112.
    [8]YAN Dejun, LIU Xuesong, ZHOU Guangtao, FANG Hongyuan. Numerical analysis on optimizing welding sequence of large-sized bottom structure for controlling welding distortion[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 55-58.
    [9]ZHANG li-guo, JI Shu-de, FANG Hong-yuan, LIU Xue-song. Influence of welding sequence of subsection welding on residual stress of T joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (12): 109-112.
    [10]CUI Xiao-fang, YUE Hong-jie, ZHAO Wen-zhong, MA Jun. Study of different welding sequences in the bogie frame of the high-speed locomotive[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (1): 101-104,108.

  • Cited by

    Periodical cited type(9)

    1. 金鑫，祝哮，唐鸿洋，田春雨，刘东利. 焊后热处理对6061-T6铝合金激光-MIG复合焊接头力学性能及组织的影响. 铝加工. 2024(06): 64-68 .
    2. 陈清勇，王桂兰，梁立业，张海鸥. ZL114A铝合金电弧-激光微铸锻复合增材制造组织与力学性能研究. 热加工工艺. 2023(07): 125-129 .
    3. 杨文静，权银洙，柴禄，滕俊飞. 6A02铝合金接触反应钎焊接头组织及抗剪强度. 焊接. 2023(06): 31-37 .
    4. 周勇，孙有平，何江美，李旺珍，谢梓文. 激光功率对铝/钢激光对接熔钎焊接头组织与性能的影响. 机械工程材料. 2023(07): 22-30 .
    5. 周金旭，康铭，田春雨，李哲，陈德军，恒俊楠. 焊后热处理对6063铝合金激光填丝焊接头组织与性能的影响. 失效分析与预防. 2022(04): 242-246 .
    6. 陈超，孙国瑞，冯天亭，范成磊，张慧婧. 层间高速摩擦复合WAAM铝合金构件组织与力学性能. 焊接学报. 2022(09): 38-43+115 . 本站查看
    7. 周思鹏，孙有平，何江美，胡一杰，杨春洋. 2524铝合金光纤激光焊接接头的组织与力学性能. 轻合金加工技术. 2021(03): 60-68 .
    8. 周思鹏，孙有平，何江美，杨春洋. 焊接速度对2524铝合金光纤激光焊接头组织及性能的影响. 特种铸造及有色合金. 2020(10): 1134-1138 .
    9. 齐岳峰，王峰，任勇彬，韩天棋. 显微硬度在铝合金钎焊性能分析中的应用. 物理测试. 2019(05): 5-8 .

    Other cited types(4)

Catalog

    Get Citation
    PDF
    XML
    Article views (346) PDF downloads (93) Cited by(13)
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return