Advanced Search
YUE Jianfeng, XIE Chang, ZHAO Jintao, ZHOU Wei, LIU Wenji, HUANG Junfen. Arc heat input distribution of fillet welding of dissimilar steel with applied transverse magnetic field[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(8): 83-90, 97. DOI: 10.12073/j.hjxb.20221008001
Citation: YUE Jianfeng, XIE Chang, ZHAO Jintao, ZHOU Wei, LIU Wenji, HUANG Junfen. Arc heat input distribution of fillet welding of dissimilar steel with applied transverse magnetic field[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(8): 83-90, 97. DOI: 10.12073/j.hjxb.20221008001
shu

Arc heat input distribution of fillet welding of dissimilar steel with applied transverse magnetic field

  • 1.

    Tianjin Key Laboratory of Modern Mechatronics Equipment Technology, Tiangong University, Tianjin, 300387, China

  • 2.

    Beijing Institute of Petrochemical Technology, Beijing, 102617, China

More Information
  • Received Date: October 07, 2022
  • Available Online: July 13, 2023
    Graphical Abstract
    • Abstract
  • In this paper, a method of applying transverse magnetic field to the arc is proposed to change the arc heat distribution on both sides of the weld by deflecting the arc, so as to improve the weld forming quality. In order to understand the influence mechanism of applied transverse magnetic field on arc heat input distribution, the rule of GTAW arc heat input distribution was studied. A three-dimensional model of GTAW arc pool coupling in dissimilar steel fillet weld under applied transverse magnetic field was established, and the coupling calculation of arc temperature field, electromagnetic field and flow field was carried out. Two kinds of arc heat distribution methods of deflecting the torch and external transverse magnetic field deflected arc were compared and analyzed. On the basis of the above work, the effect of magnetic induction intensity on the penetration form and the heat distribution of arc under the applied transverse magnetic field deflected arc was studied. The results show that the adaptability of deflection welding gun is poor in fillet welding, while the deflection arc with applied transverse magnetic field can obtain better welding quality. The relevant research can provide technical support for the optimization of welding process parameters of this kind of dissimilar steel fillet welding.
    • FullText(HTML)
    • References (13)
  • Yin Yan, Kang Ping, Zhang Ruihua, et al. Effect of heat treatment on microstructure and properties of VG10 and 3Cr13 dissimilar welded joints[J]. China Welding, 2021, 30(1): 21 − 29.
    Dak G, Pandey C. A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application[J]. Journal of Manufacturing Processes, 2020, 58: 377 − 406. doi: 10.1016/j.jmapro.2020.08.019
    Maurya A K, Pandey C, Chhibber R. Dissimilar welding of duplex stainless steel with Ni alloys: A review[J]. International Journal of Pressure Vessels and Piping, 2021, 192: 104439. doi: 10.1016/j.ijpvp.2021.104439
    Echezona N, Akinlabi S A, Jen T C, et al. TIG welding of dissimilar steel: A review[C]// Advances in Material Science and Engineering: Selected Articles from ICMMPE , 2020: 1-9.
    郑韶先, 曾道平, 孟倩, 等. 填充ER309焊丝的异种钢接头二型边界形成机理[J]. 焊接学报, 2021, 42(4): 56 − 61. doi: 10.12073/j.hjxb.20200902001

    Zheng Shaoxian, Zeng Daoping, Meng Qian, et al. Formation mechanism analysis of the type-II boundary of dissimilar steel joint with the filler metal of ER309[J]. Transactions of the China Welding Institution, 2021, 42(4): 56 − 61. doi: 10.12073/j.hjxb.20200902001
    王海燕, 牛春菊, 崔国涛, 等. 焊接工艺对TP304/SS400异种钢焊接接头组织和性能的影响[J]. 焊接学报, 2019, 40(5): 131 − 136. doi: 10.12073/j.hjxb.2019400140

    Wang Haiyan, Niu Chunju, Cui Guotao, et al. Effect of welding process on microstructure and properties of welded joint of TP304/SS400 dissimilar steel[J]. Transactions of the China Welding Institution, 2019, 40(5): 131 − 136. doi: 10.12073/j.hjxb.2019400140
    郭舒, 王海涛, 韩恩厚. 核电站接管安全端异种金属焊接接头残余应力预测的研究现状[J]. 机械工程材料, 2021, 45(10): 1 − 12. doi: 10.11973/jxgccl202110001

    Guo Shu, Wang Haitao, Han Enhou. Research status of residual stress prediction of dissimilar metal welded Joint at safetye end of nozzles in nuclear power plants[J]. Materials for Mechanical Engineering, 2021, 45(10): 1 − 12. doi: 10.11973/jxgccl202110001
    杨庆旭, 王学, 马君鹏, 等. 超超临界锅炉水冷壁T23/12Cr1MoV异种钢焊接接头焊后热处理裂纹分析[J]. 金属热处理, 2021, 46(7): 218 − 222.

    Yang Qingxu, Wang Xue, Ma Junpeng, et al. Post-weld heat treatment crack analysis of water wall T23/12Cr1MoV dissimilar steel welded joint of ultra-supercritical boiler[J]. Heat Treatment of Metals, 2021, 46(7): 218 − 222.
    Rakesh C, Asha I, Kanak K. Stress analysis of dissimilar metal weld between carbon steel and stainless steel formed by transition grading technique[J]. Materials Today: Proceedings, 2015, 2(4-5): 1657 − 1664.
    蔡建鹏, 叶延洪, 张彦杰, 等. 坡口形式对Q345/SUS304异种钢对接接头残余应力和变形的影响[J]. 机械工程学报, 2015, 51(10): 55 − 61. doi: 10.3901/JME.2015.10.055

    Cai Jianpeng, Ye Yanhong, Zhang Yanjie, et al. Effect of groove form on residual stress and deformation of butt joint of Q345/SUS304 dissimilar steel[J]. Journal of Mechanical Engineering, 2015, 51(10): 55 − 61. doi: 10.3901/JME.2015.10.055
    Rong Y M, Xu J J, Lei T, et al. Magnetism aided mitigation of deformation and residual stress in dissimilar joint 316L with EH36[J]. Journal of Materials Processing Technology, 2018, 259: 23 − 32. doi: 10.1016/j.jmatprotec.2018.04.022
    Li R, Yuan X J, Zhang H B, et al. Effect of axial magnetic field on TIG welding-brazing of AA6061 aluminum alloy to HSLA350 steel[J]. Journal of Materials Research and Technology-Jmr & T, 2021, 12: 882 − 893.
    Yan F, Wang X W, Chai F, et al. Improvement of microstructure and performance for steel/Al welds produced by magnetic field assisted laser welding[J]. Optics and Laser Technology, 2019, 113: 164 − 170.
    • Related Articles

  • Related Articles

    [1]QI Bojin, CAI Linwei. Review on Regualtion Means in Wire Arc Additive Manufacturing of Aluminum Alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION. DOI: 10.12073/j.hjxb.20240515002
    [2]LI Ke, NIU Ben, PAN Linlin, YI Jianglong, ZOU Xiaodong. Effect of heat input on microstructure and mechanical properties of wire arc additive manufactured super duplex stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(10): 94-101. DOI: 10.12073/j.hjxb.20221214003
    [3]ZHOU Zhaoyi, ZHANG Yanan, WANG Xiaofeng, LIU Jun. Weld surface defect detection based on improved two-dimensional principal component analysis[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(11): 70-76. DOI: 10.12073/j.hjxb.20210412001
    [4]LI Lei, YU Zhishui, ZHANG Peilei, ZHUANG Qiaoqiao, NIE Yunpeng. Microstructural characteristics of wire and arc additive layer manufacturing of TC4 components[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(12): 37-43. DOI: 10.12073/j.hjxb.2018390294
    [5]TANG Xiaohong, PANG Tao. Blowhole and alloy element burning loss of Al-Mg-Si 6082 alloy joint welded by argon arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (4): 21-24.
    [6]NIU Ruifeng, LIN Binghua, WANG Yani, YANG Xingfei. Evaporation loss of Mg element in pulsed laser welding of 5A05 aluminum alloy and distribution of micro-hardness of welding joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (3): 81-84.
    [7]LI Zhigang, ZHANG Hua, JIA Jianping. Plasma component calculation in underwater wet welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (4): 13-16.
    [8]WANG Xing-jun, HUANG Wen-rong, WEI Qi-long, SHEN Xian-Feng. Evaporation loss of Mg element in 5A06 aluminium alloy electron beam welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (11): 61-64.
    [9]SUN Guang, HE Jian-ping, ZHANG Chun-bo, BAI Ri-hui, WU Yi-xiong. Parameters regulated multi slope waveform control gas metal arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (3): 63-66.
    [10]Yang Hai-lan, Cai Yan, Chen Geng-jun, Wu Yi-xiong. Principal component analysis based artificial neural networks for arc welding quality control[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (4): 55-58,64.

  • Cited by

    Periodical cited type(1)

    1. 孙全喜，王伟，石智成，宋亚辉，李海豹，梁家煜，尹飞. 基于焊接角变形的辅具优化设计. 机械制造文摘(焊接分册). 2023(05): 42-45+48 .

    Other cited types(0)

Catalog

    Get Citation
    PDF
    XML
    Article views (163) PDF downloads (53) Cited by(1)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return