Citation: | GUO Lei, LI Sihao, GUO Lixia, WANG Jun, CHEN Pingping, ZHU Jiantao. Optimization of PCCP welding process parameters based on improved MULTIMOORA method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(3): 74-79. DOI: 10.12073/j.hjxb.20211018001 |
胡少伟. PCCP在我国的实践与面临问题的思考[J]. 中国水利, 2017, 18: 25 − 29. doi: 10.3969/j.issn.1000-1123.2017.11.009
Hu Shengwei. Considerations on practice and problems of PCCP in China[J]. China Water Resources, 2017, 18: 25 − 29. doi: 10.3969/j.issn.1000-1123.2017.11.009
|
董晓农, 窦铁生, 赵丽君, 等. 预应力钢筒混凝土管安全评估概述[J]. 水利水电技术, 2020, 51(10): 72 − 80.
Dong Xiaonong, Dou Tiesheng, Zhao Lijun, et al. An overview on safety assessment of prestressed concrete cylinder pipe (PCCP)[J]. Water Conservancy and Hydropower Technology, 2020, 51(10): 72 − 80.
|
胡少伟, 沈捷, 王东黎, 等. 超大口径预存裂缝的预应力钢筒混凝土管结构分析与试验研究[J]. 水利学报, 2010, 41(7): 876 − 882.
Hu Shaowei, Shen Jie, Wang Dongli, et al. Analysis and experimental research on the structure of pre-stressed concrete cylinder pipe with super large diameter and pre-existing cracks[J]. Journal of Hydraulic Engineering, 2010, 41(7): 876 − 882.
|
陈湧城, 温晓英, 李世龙, 等. 大口径PCCP管应用的关键技术问题解析[J]. 中国给水排水, 2012, 28(8): 1 − 5. doi: 10.3969/j.issn.1000-4602.2012.08.001
Chen Yongcheng, Wen Xiaoying, Li Shilong, et al. Analysis of key technical issues in the application of large-diameter PCCP pipes[J]. China Water & Wastewater, 2012, 28(8): 1 − 5. doi: 10.3969/j.issn.1000-4602.2012.08.001
|
Shaoqing Ge, Sunil Sinha. Failure analysis, condition assessment technologies, and performance prediction of prestressed-concrete cylinder pipe: state-of-the-art literature review[J]. Journal of Performance of Constructed Facilities, 2014, 28(3): 618 − 628. doi: 10.1061/(ASCE)CF.1943-5509.0000424
|
肖文波, 何银水, 袁海涛, 等. 镀锌钢GMAW焊缝成形特征与焊枪方向同步实时检测[J]. 焊接学报, 2021, 42(12): 78 − 82. doi: 10.12073/j.hjxb.20201021001
Xiao Wenbo, He Yinshui, Yuan Haitao, et al. Synchronous real-time detection of weld bead geometry and the welding torch in galvanized steel GAMW[J]. Transactions of the China Welding Institution, 2021, 42(12): 78 − 82. doi: 10.12073/j.hjxb.20201021001
|
李亚杰, 李峰峰, 吴志生, 等. 工艺参数对AZ31镁合金搅拌摩擦焊接头组织和性能的影响[J]. 焊接学报, 2020, 41(4): 31 − 37.
Li Yajie, Li Fengfeng, Wu Zhisheng, et al. Influence of technological parameters on microstructure and mechanical properties of FSW AZ31 magnesium alloy joints[J]. Transactions of the China Welding Institution, 2020, 41(4): 31 − 37.
|
张理, 郭震, 周伟, 等. 焊接速度和焊接电流对竖向高速GMAW驼峰焊缝的影响[J]. 焊接学报, 2020, 41(4): 56 − 61. doi: 10.12073/j.hjxb.20191021001
Zhang Li, Guo Zhen, Zhou Wei, et al. Effect of welding speed and welding current on humping bead of vertical high-speed GMAW[J]. Transactions of the China Welding Institution, 2020, 41(4): 56 − 61. doi: 10.12073/j.hjxb.20191021001
|
史亚贝. 激光工艺参数对AM80镁合金焊接接头性能的影响研究[J]. 兵器材料科学与工程, 2021, 44(4): 97 − 101.
Shi Yabei. Effect of laser process parameters on the properties of AM80 magnesium alloy welded joint[J]. Weapon Material Science and Engineering, 2021, 44(4): 97 − 101.
|
陈云霞, 冯菲玥, 李芳, 等. 焊接工艺参数对铝/镀锌钢板CMT搭接接头组织与性能的影响[J]. 焊接技术, 2021, 50(5): 21 − 25.
Chen Yunxia, Feng Feiyue, Li Fang, et al. Effect of welding parameters on microstructure and properties of aluminum alloy/galvanized steel CMT welded joint[J]. Welding Technology, 2021, 50(5): 21 − 25.
|
张玉, 马国印, 任晖邦, 等. 基于有限元的管道焊缝裂纹干涉问题研究[J]. 北京理工大学学报, 2020, 40(1): 23 − 28,47.
Zhang Yu, Ma Guoyin, Ren Huibang, et al. Research on the interference problem of pipeline weld cracks based on ANSYS[J]. Journal of Beijing Institute of Technology, 2020, 40(1): 23 − 28,47.
|
李志林, 杨璐, 崔瑶, 等. 焊接工艺对不锈钢角焊缝连接试件力学性能影响研究[J]. 工程力学, 2021, 38(2): 179 − 186,210. doi: 10.6052/j.issn.1000-4750.2020.04.0232
Li Zhilin, Yang Lu, Cui Yao, et al. Investigation on the influence of welding processeson mechanical properties of stainless steelfillet weld connections[J]. Engineering Mechanics, 2021, 38(2): 179 − 186,210. doi: 10.6052/j.issn.1000-4750.2020.04.0232
|
王龙, 毛琪钦, 刘挺松. 双面不锈钢复合板焊接工艺及组织性能[J]. 焊接技术, 2021, 50(5): 135 − 138,180.
Wang Long, Mao Qiqin, Liu Tingsong. Welding technology and microstructure properties of double-sided stainless steel clad plate[J]. Welding Technology, 2021, 50(5): 135 − 138,180.
|
朱亚辉, 高逦. 基于Hamacher范数的广义概率犹豫模糊MULTIMOORA决策方法[J]. 西北工业大学学报, 2020, 38(6): 1361 − 1369. doi: 10.3969/j.issn.1000-2758.2020.06.028
Zhu Yahui, Gao Li. Decision method of probabilistic hesitant fuzzy information based on hamacher aggregation operators and MULTIMOORA[J]. Journal of Northwestern Polytechnical University, 2020, 38(6): 1361 − 1369. doi: 10.3969/j.issn.1000-2758.2020.06.028
|
周文财, 魏朗, 邱兆文,等. 模糊环境下汽车故障模式风险水平综合评价方法[J]. 机械科学与技术, 2021, 40(12): 1 − 9.
Zhou Wencai, Wei Lang, Qiu Zhaowen, et al. Comprehensive evaluation method of risk level of automobile failure mode in fuzzy environment[J]. Mechanical Science and Technology For Aerospace Engineering, 2021, 40(12): 1 − 9.
|
张文宇, 刘思洋, 张茜. 基于犹豫概率模糊语言集的改进MULTIMOORA决策方法[J]. 统计与决策, 2020, 36(6): 25 − 30.
Zhang Wenyu, Liu Siyang, Zhang Qian. Improved MULTIMOORA decision-making method based on hesitant probabilistic fuzzy linguistic sets[J]. Statistics and Decision, 2020, 36(6): 25 − 30.
|
代文锋, 仲秋雁. 基于前景理论和区间二元语义MULTIMOORA的多属性决策方法[J]. 系统管理学报, 2019, 28(2): 222 − 230. doi: 10.3969/j.issn.1005-2542.2019.02.002
Dai Wenfeng, Zhong Qiuyan. Multi-attribute decision-making method based on prospect theory and interval two-tuple linguistic MULTIMOORA[J]. Journal of Systems Management, 2019, 28(2): 222 − 230. doi: 10.3969/j.issn.1005-2542.2019.02.002
|
齐春泽. 基于梯形模糊MULTIMOORA的混合多属性群决策方法[J]. 统计与决策, 2019, 35(5): 41 − 45.
Qi Chunze. A hybrid multi-attribute group decision-making method based on trapezoidal fuzzy MULTIMOORA[J]. Statistics and Decision, 2019, 35(5): 41 − 45.
|
熊升华, 陈振颂, 陈勇刚, 等. 基于指标模糊分割和MULTIMOORA的航空公司机队可靠性识别模型[J]. 计算机集成制造系统, 2019, 25(2): 431 − 438.
Xiong Shenghua, Chen Zhensong, Chen Yonggang, et al. Reliability recognition model of airline fleet based on index fuzzy segmentation and MULTIMOORA[J]. Computer Integrated Manufacturing Systems, 2019, 25(2): 431 − 438.
|
刘竞妍, 张可, 王桂华. 综合价中数据标准化方法比较研究[J]. 数字技术与应用, 2018, 36(6): 84 − 85.
Liu Jingyan, Zhang Ke, Wang Guihua. Comparative study on data standardization methods in comprehensive evaluation[J]. Digital Technology and Application, 2018, 36(6): 84 − 85.
|
Yager R R. Families of OWA operators[J]. Fuzzy Sets & Systems, 1993, 59(2): 125 − 148.
|
关罡, 李伟伟, 韩海坤. 基于熵权TOPSIS法的城镇污水治理绩效评价[J]. 人民长江, 2019, 50(6): 20 − 24.
Guan Gang, Li Weiwei, Han Haikun. Evaluation of urban sewage treatment performance based on entropy TOPSIS method[J]. Yangtze River, 2019, 50(6): 20 − 24.
|
杨林丰, 许广权. 二氧化碳焊接机器人焊接特性试验研究[J]. 焊接技术, 2020, 49(11): 68 − 70.
Yang Linfeng, Xu Guangquan. Experimental research on welding characteristics of carbon dioxide welding Robots[J]. Welding Technology, 2020, 49(11): 68 − 70.
|
朱海, 孙朝伟, 孙金睿, 等. 2024铝合金搅拌摩擦焊工艺参数对焊接质量的影响研究[J]. 热加工工艺, 2019, 48(23): 159 − 162.
Zhu Hai, Sun Zhaowei, Sun Jinrui, et al. 2024 Research on the influence of friction stir welding process parameters on the welding quality of aluminum alloys[J]. Hot Working Technology, 2019, 48(23): 159 − 162.
|
权国政, 施瑞菊, 卢顺, 等. 自动化平板堆焊的单层多道焊缝表面平整度研究[J]. 塑性工程学报, 2020, 27(10): 203 − 211. doi: 10.3969/j.issn.1007-2012.2020.10.028
Quan Guozheng, Shi Ruiju, Lu Shun, et al. Study on the surface flatness of single-layer multi-pass welds in automatic flat surfacing welding[J]. Chinese Journal of Plasticity Engineering, 2020, 27(10): 203 − 211. doi: 10.3969/j.issn.1007-2012.2020.10.028
|
[1] | LIU Wei, REN Zeliang, WANG Gang, XIU Yanfei, LI Yanqing, DOU Cunyin, GONG Limiao. A-TIG weld shaping and joint mechanical properties of austenitic stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(10): 105-114. DOI: 10.12073/j.hjxb.20240524001 |
[2] | REN Xianghui, LIANG Wenqi, WANG Ruichao, HAN Shanguo, WU Wei. Effects of different welding modes on microstructure and mechanical properties of 316 stainless steel by wire arc additive manufacturing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(4): 79-85, 92. DOI: 10.12073/j.hjxb.20230413002 |
[3] | CHANG Jinghuan, YU Gang, CAO Rui, YAN Yingjie, SUI Ran, XI Xiaobei. Microstructure and properties of titanium alloy/copper-nickel/stainless steel welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(7): 48-55. DOI: 10.12073/j.hjxb.20220820002 |
[4] | Mingdong ZHU, Bingjie WU, Liyan CAO, Yanru LI, Runhao ZHANG, Jiayue WU. Microstructure and property of cobalt alloy by laser cladding on 304LN stainless steel surface[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(8): 48-53, 86. DOI: 10.12073/j.hjxb.20220508001 |
[5] | CAO Rui, QIAO Lixue, CHE Hongyan, LI Shang, WANG Tiejun, DONG Hao. Microstructure and mechanical properties of flash butt welding high carbon martensitic stainless steel M390 and austenitic stainless steel 304[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(2): 27-33. DOI: 10.12073/j.hjxb.20210616005 |
[6] | ZHANG Min, WANG Boyu, XU Shuai, TONG Xiongwei, ZHU Ziyue, GOU Chuandong. Effect of Cr content on microstructures and mechanical properties of G520 stainless steel welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(6): 52-57. DOI: 10.12073/j.hjxb.20200829001 |
[7] | CHANG Jinghuan, CAO Rui, YAN Yingjie. Microstructure and properties of titanium alloy/stainless steel joint by cold metal transfer joining technology[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(6): 44-51. DOI: 10.12073/j.hjxb.20210114001 |
[8] | LI Hongmei, SUN Daqian, WANG Wenquan, XUAN Zhaozhi, REN Zhenan. Microstructure and mechanical properties of austenite stainless steel wire joints welded by laser[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 71-74. |
[9] | YANG Jing, LI Chang-xiang, ZHU Jin-xia, LIU Xiao-rong. Properties of Ag95CuNiLi fIler metal brazing titanium alloy and stainless steel Ⅰ.Corrosion of filler metal[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (6): 60-62,68. |
[10] | Guo Jiuzhu, Zhou Zhenhua, Li Xiangduo, Zhang Xuchen, Son Zhaiming, Zheng Tie. Friction welding of thin walled tubes of stainless steel and aluminium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1992, (4): 231-236. |
1. |
刘烁,贾旭,陈树海,余腾义,周磊磊. 电弧熔炼Fe-V合金的凝固组织与转变规律研究. 金属加工(热加工). 2024(04): 89-95 .
![]() | |
2. |
余曦,李琪,常荣辉,秦彬皓,张宇鹏,尹立孟,王海燕. 焊接工艺参数对TA15/304不锈钢真空扩散焊接头组织与抗剪强度影响. 焊接学报. 2024(05): 64-73 .
![]() | |
3. |
周自宝. 铜-镍中间层对钛/钢激光焊接头组织与性能的影响. 安徽职业技术学院学报. 2024(02): 20-25 .
![]() | |
4. |
孔华,赵振家,邹江林,王紫,黄泽泓. 匙孔内光纤激光致喷发蒸汽对焊接过程的影响. 焊接学报. 2023(05): 20-26+130 .
![]() | |
5. |
刘自刚,代锋先,陆刚,张航,沈志永. 钛合金激光焊研究现状与展望. 材料导报. 2023(S1): 354-359 .
![]() | |
6. |
杨环宇,徐信坤,巴现礼,陶星空,刘黎明. 低功率激光-双电弧焊接钛合金中厚板工艺及机理. 机械制造文摘(焊接分册). 2023(03): 1-8 .
![]() | |
7. |
常敬欢,余刚,曹睿,闫英杰,隋然,席筱蓓. 钛合金/铜-镍/不锈钢焊接接头的组织与性能. 焊接学报. 2023(07): 48-55+131-132 .
![]() | |
8. |
张世豪. 304不锈钢与PMMA异种材料激光焊接试验研究. 中国新技术新产品. 2023(15): 30-32 .
![]() | |
9. |
杨环宇,徐信坤,巴现礼,陶星空,刘黎明. 低功率激光-双电弧焊接钛合金中厚板工艺及机理. 焊接学报. 2022(12): 12-19+113-114 .
![]() |