Advanced Search
HUANG Jun, ZHAI Ziyang, WANG Kehong, SONG Kai. Simulation and experiment on multi-pass welding of 616 armor steel with thick plate structure[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(11): 89-93. DOI: 10.12073/j.hjxb.2018390279
Citation: HUANG Jun, ZHAI Ziyang, WANG Kehong, SONG Kai. Simulation and experiment on multi-pass welding of 616 armor steel with thick plate structure[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(11): 89-93. DOI: 10.12073/j.hjxb.2018390279

Simulation and experiment on multi-pass welding of 616 armor steel with thick plate structure

More Information
  • Received Date: June 28, 2016
  • Considering the effect of constraint on deformation and residual stress, a finite element model of multi-layer and multi-pass welding of 616 armor steel thick plate structure was developed. The shape and size of the weld bead and residual stress were been calculated by using Sysweld software. The thermal cycles and deformation in multi-pass welding 616 armor steel with thick plate structure was simulate. These simulation results show good agreement with experiments. The results showed that the farer from fusion line, the peak temperature is lower and the time to the peak lag behind. The deformation occurred at the both sides of weld, arc starting and arc extinction position in which high stress exits.
  • Kartal M E, Kang K H, Korsunsky A M, et al. The influence of welding procedure and plate geometry on residual stresses in thick components[J]. International Journal of Solids and Structures, 2016, 80(2): 420 ? 429.
    Park J U, An G, Woo W C, et al. Residual stress measurement in an extra thick multi-pass weld using initial stress integrated inherent strain method[J]. Marine Structures, 2014, 39(12): 424 ? 437.
    Mitra A, Prasad N S, Janakiram G D. Estimation of residual stresses in an 800 mm thick steel submerged arc weldment[J]. Journal of Materials Processing Technology, 2016, 229(3): 181 ? 190.
    He Y S, Xu Y L, Chen Y X, et al. Weld seam profile detection and feature point extraction for multi-pass route planning based on visual attention model[J]. Robotics and Computer-Integrated Manufacturing, 2016, 37(2): 251 ? 261.
    Ikushima K, Shibahara M. Prediction of residual stresses in multi-pass welded joint using idealized explicit FEM accelerated by a GPU[J]. Computational Materials Science, 2014, 93(10): 62 ? 67.
    Ibrahim O A, Lignos D G, Rogers C A. Proposed modeling approach of welding procedures for heavy steel plates[J]. Engineering Structures, 2016, 127(12): 18 ? 30.
    刘 昊, 虞 钢, 何秀丽, 等. 送粉式激光熔覆中瞬态温度场与几何形貌的三维数值模拟[J]. 中国激光, 2013, 40(12): 1 ? 8
    Liu Hao, Yu Gang, He Xiuli, et al. Three dimensional numerical of transient temperature field and coating geometry in powder feeding laser cladding[J]. Chinese Journal of Lasers, 2013, 40(12): 1 ? 8
    Alipooramirabad H, Paradowska A, Ghomashchi R, et al. Quantification of residual stresses in multi-pass welds using neutron diffraction[J]. Journal of Materials Processing Technology, 2015, 226(12): 40 ? 49.
    Liang W, Murakawa H, Deng D. Investigation of welding residual stress distribution in a thick-plate joint with an emphasis on the features near weld end-start[J]. Materials & Design, 2015, 67(2): 303 ? 312.
    Khan M, Paradowska A, Uy B, et al. Residual stresses in high strength steel welded box sections[J]. Journal of Constructional Steel Research, 2016, 116(1): 55 ? 64.
    翟紫阳, 王克鸿. 超高强钢板多层多道焊温度场有限元分析[J]. 电焊机, 2014, 44(5): 203 ? 205
    Zhai Ziyang, Wang Kehong. Finite element analysis of temperature field in multi-pass welding of ultra high strength steel plate[J]. Electric Welding Machine, 2014, 44(5): 203 ? 205
  • Related Articles

    [1]HUANG Jiqiang, GAI Shouxin, XUE Long, HUANG Junfen, CAO Yingyu, ZOU Yong. Multi-pass welding strategy for thick plate with mismatched groove by robot[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(6): 60-66. DOI: 10.12073/j.hjxb.20191127002
    [2]CHEN Jie, WANG Yuhua, ZHU Zhenxin, XIAO Jun, ZHAN Xiaohong. Numerical simulation of multi-layer and multi-passes welding anti-deformation for thick plate Invar alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(4): 84-89. DOI: 10.12073/j.hjxb.2019400105
    [3]LIU Yanjing<sup>1</sup>, CUI Haichao<sup>1,2</sup>, LU Fenggui<sup>1</sup>, TANG Xinhua<sup>1</sup>, LI Fuquan<sup>2</sup>. Research on the fracture toughness of micro zone in the joint based on multi-layer and multi-pass welding of rotor steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(9): 105-108. DOI: 10.12073/j.hjxb.2018390233
    [4]SUN Jiamin, DENG Dean, YE Yanhong, HE Jing, XIA Linying. Numerical simulation of welding residual stress in multi-pass T-joint of thick Q390 high strength steel plate using instantaneous heat source[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(7): 31-34,38.
    [5]XU Guoxiang, DU Baoshuai, DONG Zaisheng, ZHU Jing. Finite element anlysis of temperature field in multi-pass welding of thick steel plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (5): 87-90.
    [6]ZHU Jindan, CHEN Hu, GONG Jianming, TU Shandong. Discussion on numerical simulation of multi-pass welding of thin-plate based on shell element[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (11): 105-108.
    [7]MA Lin, YUAN Jinping, ZHANG Ping, ZHAO Junjun. Finite numerical simulation of temperature field in multi-pass laser cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (7): 109-112.
    [8]JIANG You-qing, GU Lei, LIU Jian-hua. Temperature field numerical simulation of YAG-MIG hybrid welding process for thick aluminum alloy plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (6): 104-107.
    [9]MENG Qing-guo, FANG Hong-yuan, XU Wen-li, JI Shu-de. Numerical simulation of muli-pass welding temperature field taking account of metal filling[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (5): 53-55,59.
    [10]YANG Guang-chen, XUE Zhong-ming, ZHANG Yan-hua. Prediction of angular distortion in thick plate multi-pass weld[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (1): 115-118.
  • Cited by

    Periodical cited type(1)

    1. 闫非凡,许强. 收发组件返修过程中多功能芯片失效原因及解决方法. 航空维修与工程. 2025(04): 54-56 .

    Other cited types(1)

Catalog

    Article views (717) PDF downloads (4) Cited by(2)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return