Advanced Search
LI Qi, LIU Fengmei, YUE Xiong, XIONG Min, YI Yaoyong, GAO Haitao. Effect of heat treatment on microstructure and high temperature properties of IC10 superalloy TLP diffusion welding under 80 μm gap[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(5): 36-44. DOI: 10.12073/j.hjxb.20201209003
Citation: LI Qi, LIU Fengmei, YUE Xiong, XIONG Min, YI Yaoyong, GAO Haitao. Effect of heat treatment on microstructure and high temperature properties of IC10 superalloy TLP diffusion welding under 80 μm gap[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(5): 36-44. DOI: 10.12073/j.hjxb.20201209003
shu

Effect of heat treatment on microstructure and high temperature properties of IC10 superalloy TLP diffusion welding under 80 μm gap

  • China-Ukraine Institute of Welding, Guangdong Academy of Sciences, Guangdong Academy of Sciences Guangdong Provincial Key Laboratory of Advanced Welding Technology, Guangzhou, 510650, China

More Information
  • Received Date: December 08, 2020
  • Available Online: July 04, 2021
    Graphical Abstract
    • Abstract
  • The IC10 superalloy with 80 μm gap was welded by TLP diffusion welding. The microstructure, morphology, modulus of elasticity, microhardness, high temperature tensile strength, high temperature durability and fracture morphology before and after heat treatment of IC10 joints were tested by using scanning electron microscopy (SEM/EDS), nano-indenter and high-temperature tensile testing machine. The results showed that when SBM-3 was used as the intermediate solder and the gap size of the weld was 80 μm, under the welding process conditions of 1 250 ℃, 5 MPa, and 6 h, the morphology and base composition of the weld seam and the base metal were similar. After heat treatment, the tensile strength was 268 MPa, which higher than 97.5% of base metal (275 MPa) at the test temperature of 1 100 ℃. The high temperature durability of the IC10 joints were tested, the creep time of the joints was more than 117 h under the condition of the temperature of 1 100 ℃ and the stress of 36 MPa, which was higher than 90% of the base material. In the joint structure, a larger volume of γ + γ′ phase existed in the weld, and the joint structure transitioned smoothly from the base material to the welded joints. In high-temperature tensile and high-temperature durability tests, cracks started to expand from at the edge of the borides and carbides as well as the edge of the γ + γ′ eutectic. Heat treatment increased the elastic modulus of the base material while reduced the elastic modulus of the weld. The reduction of the joint elastic modulus improves the high-temperature mechanical strength of the TLP diffusion welded joints.
    • FullText(HTML)
    • References (18)
  • Bo L, Lu C, Jinbao H, et al. Microstructure-properties relationship of transient liquid phase diffusion bonded a third generation single crystal superalloy joint[J]. China Welding, 2017, 26(1): 58 − 63.
    柴禄, 侯金保, 张胜. 工艺参数对IC10单晶TLP接头组织和性能的影响[J]. 焊接学报, 2018, 39(8): 114 − 118. doi: 10.12073/j.hjxb.2018390212

    Chai Lu, Hou Jinbao, Zhang Sheng. Process parameters on microstructure and properties of IC10 single crystal TLP joints[J]. Transactions of the China Welding Institution, 2018, 39(8): 114 − 118. doi: 10.12073/j.hjxb.2018390212
    Jinbao H, Youhui W, Lei Z. Transient liquid phase(TLP)diffusion donding of NiAl alloy[J]. Journal of Aeronautical Materials, 2006, 26(3): 329 − 330.
    郎波, 侯金保, 滕俊飞, 等. 新型航空材料及其结构的扩散焊[J]. 航空制造技术, 2014, 464(20): 74 − 75. doi: 10.3969/j.issn.1671-833X.2014.20.012

    Lang Bo, Hou Jinbao, Teng Junfei, et al. Diffusion welding of new aviation materials and structure[J]. Aviation Manufacturing Technology, 2014, 464(20): 74 − 75. doi: 10.3969/j.issn.1671-833X.2014.20.012
    Ye L, Li X, Mao W, et al. Brazing of IC10 superalloy with Ni-based brazing fillers using Hf and Zr as melting-point depressants[J]. Transactions of the China Welding Institution, 2009, 30(2): 137 − 140.
    Li Q, Liu F, Yue X, et al. Effect of interlayer material on microstructure and mechanical properties of diffusion brazd IC10 superalloy[J]. IOP Conference Series: Materials Science and Engineering, 2019, 612(3): 032076.
    Idowu O A, Richards N L, Chaturvedi M C. Effect of bonding temperature on isothermal solidification rate during transient liquid phase bonding of Inconel 738LC superalloy[J]. Materials Science & Engineering A (Structural Materials: Properties, Microstructure and Processing), 2005, 397(1-2): 98 − 112.
    潘林. 不同中间层材料TLP焊FGH97合金及接头凝固行为分析[D]. 南昌: 南昌航空大学, 2012.

    Pan Lin. Analysis of solidification behavior of FGH97 alloy and joints welded by TLP with different interlayer materials[D]. Nanchang: Nanchang University of Aeronautics, 2012.
    韩汾汾, 郭广思, 李辉, 等. 改型K417L镍基高温合金的热疲劳行为[J]. 沈阳理工大学学报, 2008, 27(2): 64 − 68. doi: 10.3969/j.issn.1003-1251.2008.02.016

    Han Fenfen, Guo Guangsi, Li Hui, et al. Thermal fatigue behavior of modified K417L Ni-based superalloy[J]. Journal of Shenyang University of Technology, 2008, 27(2): 64 − 68. doi: 10.3969/j.issn.1003-1251.2008.02.016
    刘纪德. TLP连接对一种镍基单晶高温合金组织和性能的影响[D]. 沈阳: 中国科学院金属研究所, 2007.

    Liu Jide. Effect of TLP bonding on microstructure and properties of a Ni-based single crystal superalloy[D]. Shenyang: Institute of Metals, Chinese Academy of Sciences, 2007.
    张炫, 金涛, 赵乃仁, 等. 一种镍基单晶合金拉伸流变行为及断裂机制的研究[C]//2004年材料科学与工程新进展, 北京: 冶金出版社, 2004: 745−749.

    Zhang Xuan, Jin Tao, Zhao Nairen, et al. Study on tensile rheological behavior and fracture mechanism of a Ni-based single crystal alloy[C]//2004 Collection of New Developments in material Science and Engineering, Beijing: Metallurgical Industry Press, 2004: 745−749.
    Zhang L X, Chang Q, Sun Z, et al. Effects of boron and silicon on microstructural evolution and mechanical properties of transient liquid phase bonded GH3039/ IC10 joints[J]. Journal of Manufacturing Processes, 2019, 38: 167 − 173. doi: 10.1016/j.jmapro.2019.01.016
    Kamaraj M, Serin K, Kolbe M, et al. Influence of stress state on the kinetics of gamma-channel widening during high temperature and low stress creep of the single crystal superalloy CMSX[J]. Materials Science & Engineering A, 2001, 319: 796 − 799.
    Kim D, Sah I, Jang C. Effects of aging in high temperature helium environments on room temperature tensile properties of nickel-base superalloys[J]. Materials Science and Engineering: A, 2011, 528(3): 1713 − 1720. doi: 10.1016/j.msea.2010.10.104
    都贝宁, 盛立远, 赖琛, 等. 一种镍基高温合金蠕变过程中碳、硼化物的演变行为及结构表征[J]. 稀有金属材料与工程, 2017, 46(8): 87 − 93.

    Du Beining, Sheng Liyuan, Lai Chen, et al. Evolution behavior and structure characterization of carbon and borides during creep of a nickel-based superalloy[J]. Rare Metal Materials and Engineering, 2017, 46(8): 87 − 93.
    史振学, 刘世忠, 赵金乾. C含量对一种单晶高温合金组织和持久性能的影响[J]. 有色金属材料与工程, 2018, 39(5): 5 − 10.

    Shi Zhenxue, Liu Shizhong, Zhao Jinqian. Effect of C content on microstructure and durability of a single crystal superalloy[J]. Non-ferrous Metals Materials and Engineering, 2018, 39(5): 5 − 10.
    Li H Y, Kong Y H, Chen G S, et al. Effect of different processing technologies and heat treatments on the microstructure and creep behavior of GH4169 superalloy[J]. Materials Science and Engineering: A, 2013, 582: 368 − 373. doi: 10.1016/j.msea.2013.06.021
    Qin H, Kuang T, Li Q, et al. Stress concentration induced by the crystal orientation in the transient-liquid-phase bonded Joint of single-crystalline Ni3Al[J]. Materials, 2019, 12(17): 2765. doi: 10.3390/ma12172765
    • Related Articles

  • Related Articles

    [1]WANG Dongpo, LIU Kaiyue, DENG Caiyan, GONG Baoming, WU Shipin, XIAO Na. Effects of PWHT on the impact toughness and fracture toughness of the weld metal under restraint welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(8): 63-67, 78. DOI: 10.12073/j.hjxb.20190914001
    [2]LIU Zhengjun, QIN Hua, SU Yunhai, LIU Changjun, LU Yanpeng. Microstructure and low temperature impact toughness of vibration assisted welded BWELDY960Q steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(8): 93-96.
    [3]HU Jie, JIANG Zhizhong, HUANG Jihua, CHEN Shuhai, ZHAO Xingke, ZHANG Hua. Effects of heat treatment processes on microstructure and impact toughness of weld metal of vacuum electron beam welding on CLAM steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (11): 67-71.
    [4]XUE Gang, ZHAO Fuchen, JING Yanhong, NIU Jicheng, ZHANG Yonghui, GAI Dengyu. Effect of carbon on impact toughness of metal deposited with high strength austenite electrodes[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (8): 89-92.
    [5]JI Shude, ZHANG Liguo, FANG Hongyuan, LIU Xue-song. Influence of local heating-cooling on welding residual stress of francis turbine runner[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (2): 71-74.
    [6]JI Shu-de, ZHANG Li-guo, FANG Hong-yuan, LIU Xue-song. Influence of local peening on welding residual stress of francis turbine runner[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (1): 81-84.
    [7]JI Shu-de, FANG Hong-yuan, LIU Xue-song, MENG Qing-guo. Particularity analysis of Francis turbine runner's simulation during welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (7): 71-74.
    [8]JI Shu-de, FANG Hong-yuan, LIU Xue-song, MENG Qin-guo. Influence of blade stress state on invalidation of francis turbine runner[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (2): 52-55.
    [9]JI Shu-de, FANG Hong-yuan, LIU Xue-song, MENG Qing-guo. Simulation on welding stress field of Francis turbine runner simplified model[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (4): 107-110.
    [10]Ma Jin. EFFECT OF TRACE BORON ON IMPACT TOUGHNESS[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1988, (3): 155-161.

Catalog

    Get Citation
    PDF
    XML
    Article views (387) PDF downloads (32) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return