Advanced Search
DONG Xiaojing, LI Huan, YANG Lijun, LIANG Yu. Microstructure and mechanical properties of pulse MIG aluminum alloy welded joints by means of a novel multi-strands composite welding wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(11): 61-67. DOI: 10.12073/j.hjxb.2019400289
Citation: DONG Xiaojing, LI Huan, YANG Lijun, LIANG Yu. Microstructure and mechanical properties of pulse MIG aluminum alloy welded joints by means of a novel multi-strands composite welding wire[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(11): 61-67. DOI: 10.12073/j.hjxb.2019400289
shu

Microstructure and mechanical properties of pulse MIG aluminum alloy welded joints by means of a novel multi-strands composite welding wire

  • 1.

    Tianjin Key Laboratory of Advanced Joining Technology, Tianjin University, Tianjin 300072, China

  • 2.

    Jiangsu Lianjie Welding Technology Co.,Ltd., Jiangyin 214400, China

More Information
  • Received Date: April 12, 2019
    Graphical Abstract
    • Abstract
  • In this study, a novel multi-strand composite welding wire was adopted in 5A06 aluminum pulse MIG welding method, and the microstructures and properties of aluminum alloy multi-strand composite wire welded joints were compared with those of traditional TIG welded joint. The results show that the welded joint used by this novel wire has a better tensile strength, which reaches up to 340 MPa (86.7% of the base metal). The performance of MIG welded joint is similar to that of TIG welded joint, and it can improve welding efficiency by about 4 times. It is also found that the softening of the heat affected zone of the welded joint is mainly affected by the larger grain size and the higher recrystallization ratio, the lower Mg content as well as the coarsening and reduction of the precipitated phase caused by higher heat input. In addition, the pulse MIG welding method with this novel wire can reduce the heat input in welding process, refine grains, and can significantly weaken the loss of Mg element and precipitation. Based on these advantages, the softening of the pulse MIG welded joint decreases and the excellent properties of welded joint can be obtained.
    • FullText(HTML)
    • References (15)
  • Hadadzadeh A, Ghaznavi M M, Kokabi A H. HAZ softening behavior of strain-hardened Al-6.7 Mg alloy welded by GMAW and pulsed GMAW processes[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(5-8):2255-2265.
    Wang Y, Wei B, Guo Y, et al. Microstructure and mechanical properties of the joint of 6061 aluminum alloy by plasma-MIG hybrid welding[J]. China Welding, 2017, 26(2):58-64.
    Hadadzadeh A, Ghaznavi M M, Kokabi A H. The effect of gas tungsten arc welding and pulsed-gas tungsten arc welding processes parameters on the heat affected zone-softening behavior of strain-hardened Al-6.7 Mg alloy[J]. Materials & Design, 2014, 55(3):335-342.
    金礼, 徐敏, 薛家祥, 等. 热输入对铝合金双脉冲MIG焊接头性能的影响[J]. 焊接学报, 2018, 39(1):89-92 Jin Li, Xu Min, Xue Jiaxiang, et al. Effect of line energy on properties of aluminum alloy joints in double pulsed MIG welding[J]. Transactions of the China Welding Institution, 2018, 39(1):89-92
    陆江旭. 5A06铝合金TIG焊焊接接头性能研究与高韧性高强度铝合金焊丝研制[D]. 杭州:浙江大学, 2016.
    高顶, 阿兰?托马斯?麦尔, 郝锋. 中国矿业大学. 一种多股绞合焊丝:中国, 201455562U[P]. 2010–05–12.
    Fang C, Chen Y, Yang Z, et al. Cable-type welding wire submerged arc surfacing[J]. Journal of Materials Processing Technology, 2017, 249(11):25-31.
    Yan S, Nie Y, Zhu Z, et al. Characteristics of microstructure and fatigue resistance of hybrid fiber laser-MIG welded Al-Mg alloy joints[J]. Applied Surface Science, 2014, 298(11):12-18.
    李念奎, 凌昊, 聂波, 等. 铝合金材料及其热处理技术[M]. 北京:冶金工业出版社, 2012.
    Dongxia Y, Xiaoyan L, Dingyong H, et al. Effect of minor Er and Zr on microstructure and mechanical properties of Al-Mg-Mn alloy (5083) welded joints[J]. Materials Science and Engineering A, 2013, 561(3):226-231.
    Kim Dongyoon, Kim Dongcheol, Kang Munjin, et al. Effect of aluminum welding wire Mg content on the mechanical properties of Al 5083 alloy weld metal[J]. Journal of Korean Institute of Metal and Materials, 2017, 55(10):716-723.
    Howeyze M, Arabi H, Eivani A R, et al. Strengthening of AA5052 aluminum alloy by equal channel angular pressing followed by softening at room temperature[J]. Materials Science and Engineering A, 2018, 720(12):160-168.
    Lu J, Wu X, Liu Z, et al. Microstructure and mechanical properties of ultrafine-grained copper produced using intermittent ultrasonic-assisted equal-channel angular pressing[J]. Metallurgical and Materials Transactions A, 2016, 47(9):4648-4658.
    Chen Y, Miao Y, Li L, et al. Joint performance of laser-TIG double-side welded 5A06 aluminum alloy[J]. Transactions of Nonferrous Metals Society of China, 2009, 19(1):26-31.
    Zhang L, Li X, Nie Z, et al. Comparison of microstructure and mechanical properties of TIG and laser welding joints of a new Al-Zn-Mg-Cu alloy[J]. Materials & Design, 2016, 92(4):880-887.
    • Related Articles

  • Related Articles

    [1]CHEN Haiyong, DU Xiaolin, DONG Yan. Tiny visual feature extraction of random changing weld[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 97-101.
    [2]CHI Dazhao, MAI Chengle, SUN Changli, GANG Tie. Wavelet package based ultrasonic defect detection method for testing austenitic stainless steel weldment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 43-46.
    [3]ZHAO Huihuang, ZHOU Dejian, WU Zhaohua, LI Chunquan, LI Kangman. SMT soldering image denoising based on wavelet packet transform and adaptive threshold[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (11): 73-76.
    [4]LIU Lijun, LAN Hu, WEN Jianli, YU Zhongwei. Feature extraction of penetration arc sound in MIG welding via wavelet packet frequency-band energy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (1): 45-49.
    [5]WEN Jianli, LIU Lijun, LAN Hu. Penetration state recognition of MIG welding based on genetic wavelet neural network[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (8): 41-44.
    [6]DI Xinjie, LI Wushen, BAI Shiwu, LIU Fangming. Metal magnetic memory signal recognition by neural network for welding crack[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (3): 13-16.
    [7]LI Hexi, WANG Guorong, SHI Yonghua, ZHANG Weimin. Automatic recognition of welding targets based on normalized singular value decomposition of image matrix[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (2): 35-39.
    [8]TIAN Songya, WU Dongchun, SUN Ye, FU Weiliang. Wavelet detection of short circuit signal in CO2 arc welding based on DSP[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (7): 65-68.
    [9]YANG Lijun, XU Licheng, ZHANG Xiaonan, LI Junyue. Wavelet filtering of electric signals in short circuit CO2 welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (8): 31-34,38.
    [10]QU Wen-tai, ZHU jing. Research on Technology of Detecting Welding Seam Based on Gauss Wavelet[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (4): 64-68.

  • Cited by

    Periodical cited type(10)

    1. 赵昀，梁乐，孙宏伟，陈卫彬，张本顺. 层间冷却对电弧增材制造钛合金构件性能的影响. 焊接. 2024(02): 26-30 .
    2. 玄明昊，吴斌，邢本东，于京令. 基于TA15电弧熔丝制件的激光沉积连接力学性能研究. 飞机设计. 2024(03): 13-18 .
    3. 杨培智，张钧，杨海欧. TC4钛合金混合制造技术的研究与进展. 铸造技术. 2023(11): 977-987 .
    4. 滕树满. 电弧熔丝增材制造研究进展(续完). 有色金属加工. 2022(02): 9-15+43 .
    5. 夏玉峰，滕海灏，张雪，郑德宇，权国政. Ti-6Al-4V合金电弧熔丝增材的组织性能研究进展. 重庆大学学报. 2022(04): 87-99 .
    6. 孔斌，杜心伟，海沁雨，陈纪城，刘仁培，魏艳红. Ti6Al4V薄板脉冲激光拼焊焊缝成形及力学性能. 焊接. 2022(09): 10-16 .
    7. 董万鹏，高华兵，果春焕，董涛，杨振林，李海新，姜风春. 增材制造工艺及热处理对Ti-6Al-4V合金组织和性能的影响. 航空材料学报. 2022(06): 22-32 .
    8. 孔斌，杜心伟，海沁雨，陈纪城，刘仁培，魏艳红. Ti6Al4V薄板脉冲激光拼焊的焊缝成形及力学性能. 机械制造文摘(焊接分册). 2022(05): 1-7 .
    9. 刘云鸾，敖三三，罗震，相茜. 焊接与智能制造(下)——第25届北京·埃森焊接与切割展览会焊接国际论坛综述. 焊接技术. 2021(08): 1-3 .
    10. 权国政，杨焜，盛雪，余炎泽. 电弧熔丝增材制造残余应力控制方法综述. 塑性工程学报. 2021(11): 1-10 .

    Other cited types(2)

Catalog

    Get Citation
    PDF
    XML
    Article views (369) PDF downloads (5) Cited by(12)
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return