Advanced Search

column
Arc burning stability of variable polarity TIG welding and control with constant duty cycle
LIU Bo, ZHU Zhiming, YANG Zhongyu, FU Pingpo
2019, 40(1): 1-4. DOI: 10.12073/j.hjxb.2019400001
[Abstract] [PDF]
Brazing ZrO2 ceramic and TC4 alloy using Ag-Cu+WC composite filler
WANG Zichen, CAO Jian, DAI Xiangyu, FENG Jicai
2019, 40(1): 5-9. DOI: 10.12073/j.hjxb.2019400002
[Abstract] [PDF]
Burn through holes and porosities during laser welding of titanium alloy in vertical position and their numerical model
DORUK Yelkenci, CHEN Junhong, WEN Peng, CHANG Baohua, SHAN Jiguo
2019, 40(1): 10-14. DOI: 10.12073/j.hjxb.2019400003
[Abstract] [PDF]
Microstructure and properties of weld by high-speed tandem TIG welding of thin 304 stainless steel plate
JIANG Haihong, QIN Guoliang, FENG Chao, CHEN Yong, WANG Shilu
2019, 40(1): 15-18. DOI: 10.12073/j.hjxb.2019400004
[Abstract] [PDF]
Condition detection in Al alloy welding process based on deep mining of arc spectrum
ZHANG Zhifen, YANG Zhe, REN Wenjing, WEN Guangrui
2019, 40(1): 19-25. DOI: 10.12073/j.hjxb.2019400005
[Abstract] [PDF]
Effects of axial force on microstructures and mechanical properties of underwater friction taper plug welding for dissimilar steel
LIN Wei, YANG Xinqi, XIONG Junzhen, LIU Kaixuan
2019, 40(1): 26-31. DOI: 10.12073/j.hjxb.2019400006
[Abstract] [PDF]
Composition design and heat treatment procedure optimization for the medium-C Fe-Cr-C surfacing alloy
YANG Jian, ZHOU Yefei, CHEN Shuhai, HUANG Jihua, YANG Qingxiang
2019, 40(1): 32-36. DOI: 10.12073/j.hjxb.2019400007
[Abstract] [PDF]
Quality monitoring technology of laser welding process based on coaxial image sensing
GONG Jianfeng, LI Huizhi, LI Liqun, Wang Gang
2019, 40(1): 37-42. DOI: 10.12073/j.hjxb.2019400008
[Abstract] [PDF]
Analysis on low cycle fatigue damage of Ti-6Al-4V based on combined hardening model
SONG Song, HAN Yongdian, XU Lianyong, JING Hongyang, ZHAO Lei
2019, 40(1): 43-48. DOI: 10.12073/j.hjxb.2019400009
[Abstract] [PDF]
Three-dimensional reconstruction of molten pool appearance in GMA additive manufacturing based on ACT stereo matching algorithm
YIN Ziqiu, XIONG Jun
2019, 40(1): 49-52. DOI: 10.12073/j.hjxb.2019400010
[Abstract] [PDF]
Porosity and microstructure characteristic of 1060Al laser welded joint under high frequency micro-vibration condition
CAI Zunwu, LU Qinghua, ZHANG Cheng, ZHANG Wei
2019, 40(1): 53-58. DOI: 10.12073/j.hjxb.2019400011
[Abstract] [PDF]
Influence of age-hardening treatment on anti-wear performance of WC/Cu-Ni-Mn hardfacing coatings
XIA Weisheng, MENG Xuewei, YANG Rongguo, YANG Shuai, GUI Chibin
2019, 40(1): 59-64. DOI: 10.12073/j.hjxb.2019400012
[Abstract] [PDF]
Multi-layer explosive welding of 304 stainless steel to Q235 steel
YANG Ming, MA Honghao, SHEN Zhaowu, LI Xuejiao, WANG Bo
2019, 40(1): 65-70. DOI: 10.12073/j.hjxb.2019400013
[Abstract] [PDF]
Design method and error analysis of thin plate butt welded joint specimen for ultrasonic fatigue test
WANG Ying, WANG Dongpo, DING Jikun, DENG Caiyan, WU Liangchen
2019, 40(1): 71-74. DOI: 10.12073/j.hjxb.2019400014
[Abstract] [PDF]
Microstructure and property of fusion welding butt joints of TA2/Q235 composite plate with Ni alloy transition layers
ZHANG Yayun, WEI Jinshan, QI Yanchang, MA Chengyong, XU Yusong
2019, 40(1): 75-79. DOI: 10.12073/j.hjxb.2019400015
[Abstract] [PDF]
Effect of holding time on the interfacial microstructure and mechanical properties of K9 glass/B2O3-Bi2O3-TiO2/pure Ti brazing joints
WANG Meirong, LEI Yuzhen, TANG Dongyan, SONG Xiaoguo
2019, 40(1): 80-83. DOI: 10.12073/j.hjxb.2019400016
[Abstract] [PDF]
Modeling of material flow during friction stir welding and the application for defect prediction
LONG Ling, SHI Qingyu, LIU Tie, LIU Xi, SUN Zhanguo
2019, 40(1): 84-88. DOI: 10.12073/j.hjxb.2019400017
[Abstract] [PDF]
Effect of humidity on crack sensitivity of aluminum alloy weld joint and its mechanism
RUAN Ye, SU Jinlong, QIAO Jianyi, QIU Xiaoming, XING Fei
2019, 40(1): 89-93. DOI: 10.12073/j.hjxb.2019400018
[Abstract] [PDF]
Study on influence factor and formation mechanism of porosities in CMT welding of galvanized steel sheet
LI Chaohao, HUA Xueming, ZHANG Yuelong, GU Yong, XU Zelin
2019, 40(1): 94-98. DOI: 10.12073/j.hjxb.2019400019
[Abstract] [PDF]
Microstructure and performance of backing welding joint of high strength steel by bypass-current wire-heating PAW
MIAO Yugang, MA Zhaowei, ZHAO Huihui, YANG Xiaoshan, LIU Ji
2019, 40(1): 99-103. DOI: 10.12073/j.hjxb.2019400020
[Abstract] [PDF]
Effects of nitrogen content and welding current on microstructure and properties of the weld of high nitrogen austenite steel
MING Zhu, WANG Kehong, WANG Wei, FAN Chenglei, WANG Youqi
2019, 40(1): 104-108. DOI: 10.12073/j.hjxb.2019400021
[Abstract] [PDF]
Finite element analysis on wear of stirring tool considering temperature effect
CHEN Zhuofan, WANG Qingxia, WANG Ming, ZHAO Huihui, YIN Yuhuan
2019, 40(1): 109-112. DOI: 10.12073/j.hjxb.2019400022
[Abstract] [PDF]
Effect of rapid cooling on mechanical properties of welded joint in laser welding of DP1000 dual phase steel
WANG Jinfeng, YANG Lijun, SUN Mingsheng, LI Cong, LI Bing
2019, 40(1): 113-118. DOI: 10.12073/j.hjxb.2019400023
[Abstract] [PDF]
Study on microstructure and mechanical properties of spot welded joints of TRIP980 high strength steel
XIE Ruijun, LI Congzeng, ZHENG Gang, CHEN Furong
2019, 40(1): 119-123. DOI: 10.12073/j.hjxb.2019400024
[Abstract] [PDF]
Discussion of HAZ crack initiation behaviour of mismatched welded joints
LING Kun, HUANG Xiaomei
2019, 40(1): 124-130. DOI: 10.12073/j.hjxb.2019400025
[Abstract] [PDF]
Study on CO2 corrosion behavior of 5Cr steel fusion welded joint based on electrochemical method
LIU Fang, ZHOU Guangtao, WU Shikai, SU Liji, CHEN Meifeng
2019, 40(1): 131-136. DOI: 10.12073/j.hjxb.2019400026
[Abstract] [PDF]
Analysis on the process of metal flow under the shoulder
SUN Hongyu, ZHOU Qi, ZHU Jun, PENG Yong, WANG Kehong
2019, 40(1): 137-140. DOI: 10.12073/j.hjxb.2019400027
[Abstract] [PDF]
Microstructures and microhardness of TA1/Q235B joints welded by TIG with Cu-based flux-cored wire
LUO Hailong, ZHANG Ming, MU Erlong, WANG Xiaowei, DING Xu
2019, 40(1): 141-146. DOI: 10.12073/j.hjxb.2019400028
[Abstract] [PDF]
Numerical simulation of stress determination coefficients for indentation strain-gage method
CHEN Jing, KAN Ying, JIANG Yunlu, CHEN Huaining
2019, 40(1): 147-150. DOI: 10.12073/j.hjxb.2019400029
[Abstract] [PDF]
Effect of surface nanocrystallization on welding liquation cracking of nickel-base superalloy
LI Le, LU Yuanyuan, TANG Feng, GUO Xixi, LIU Dejian
2019, 40(1): 151-155. DOI: 10.12073/j.hjxb.2019400030
[Abstract] [PDF]
Life prediction of creep-fatigue for 304H with welded joints
ZHANG Liwen, ZHONG Yuping, LI Shiqian, CHEN Youheng
2019, 40(1): 156-160. DOI: 10.12073/j.hjxb.2019400031
[Abstract] [PDF]