Citation: | CHI Dazhao, GANG Tie. Defect detection method based on 2D entropy image segmentation[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(12): 25-28. |
梁硼, 魏艳红, 占小红. 基于B样条曲线的X射线图像焊缝缺陷分割与提取[J]. 焊接学报, 2012, 33(7):109-112. Liang Peng, Wei Yanhong, Zhan Xiaohong. Weld defect segmentation and extraction of X-ray image based on B-spline curve[J]. Transactions of the China Welding Institution, 2012, 33(7):109-112.
|
高炜欣, 胡玉衡, 穆向阳, 等. 基于聚类的埋弧焊X射线焊缝图像缺陷分割算法及缺陷模型[J]. 焊接学报, 2012, 33(4):37-41. Gao Weixin, Hu Yuheng, Mu Xiangyang, et al. Study on sub-arc X-ray welding image defect segmentation algorithm and defect model[J]. Transactions of the China Welding Institution, 2012, 33(4):37-41.
|
Kechida A, DraiR, Khelil M. 2D Gabor functions and FCMI algorithm for flaws detection in ultrasonic images[J]. Transactions on engineering, computing and technology, 2005, (9):1305-5313.
|
KapurJ N, Sahoo P K, Wong A K C. New method for gray-level picture thresholding using the entropy of the histogram[J]. Computer Vision, Graphics, and Image Processing, 1985, 29(3):273-285.
|
MarianoR, Omar O, Marroquin J L. Entropy-controlled quadratic Markov measure field models for efficient image segmentation[J]. IEEE Transactions on Image Processing, 2007, 16(12):3047-3057.
|
迟大钊, 刚铁, 孙昌立. 基于自适应滤波的超声杂波抑制方法[J]. 焊接学报, 2015, 36(11):33-36. Chi Dazhao, Gang Tie, Sun Changli. An ultrasonic clutter suppression method using adaptive filter[J]. Transactions of the China Welding Institution, 2015, 36(11):33-36.
|
迟大钊, 刚铁, 姚英学. 基于非线性小波收缩的超声检测缺陷信号识别方法[J]. 机械工程学报, 2011, 47(18):1-6. Chi Dazhao, Gang Tie, Yao Yingxue. Non-linear wavelet shrinkage based method for defect detection in ultrasonic signal[J]. Journal of Mechanical Engineering, 2011, 47(18):1-6.
|
[1] | WANG Zhen, CHENG Fangjie, ZHANG Yanshen, SHAO Zhujing, WANG Dongpo. Effect of misalignment on fatigue performance of horizontal welded joints in steel catenary riser system[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(3): 123-127. DOI: 10.12073/j.hjxb.2019400084 |
[2] | YANG Song, YANG Yuanming. U-tube local damage analysis and preventable method for AP1000 steam generator during local post weld heat treatment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(6): 90-94. |
[3] | XIE Hongwei, KUANG Yongcong, OUYANG Gaofei, ZHANG Xianmin. Solder joint inspection method regarding misalignment[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (7): 30-34. |
[4] | DAI Wei, XUE Songbai, ZHANG Liang, JI Feng. Reliability analysis of PBGA soldered joints based on Taguchi method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (11): 81-84. |
[5] | DAI Wei, XUE Songbai, ZHANG Liang, SHENG Zhong. Analysis on soldered joint reliability of PBGA package with different arrangement models[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (9): 73-76. |
[6] | LIU Xi. Fatigue reliability evaluation for welding construction containing welding defects[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (1): 89-92,96. |
[7] | LIN Guoxiang, YE Jinbao, QIU Changjun. Calculating method of reliability on anti fatigue fracture of weld[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (1): 50-52. |
[8] | ZHANG Liang, XUE Songbai, LU Fangyan, HAN Zongjie. Finite element analysis on soldered joint reliability of QFP device with different solders[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (10): 45-48, 52. |
[9] | LIU Xiaokang, YANG Shengwen, JANG Chuanwen. Joint optimization and its reliability analysis of hand disk magnetic head[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (8): 83-87. |
[10] | WU Yu-xiu, XUE Song-bai, HU Yong-Fang. Finite element analysis on reliability of soldered joint of J-lead[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (12): 85-88. |
1. |
刘双耀,卢煜成,程文锋,王瑞权,王伟,高建森. 机器人CMT-P焊接参数对4043铝合金焊缝成形影响的试验研究. 金属加工(热加工). 2025(03): 56-62 .
![]() | |
2. |
任香会,梁文奇,王瑞超,韩善果,武威. 焊接模式对电弧增材制造316不锈钢组织及力学性能的影响. 焊接学报. 2024(04): 79-85+92+133-134 .
![]() | |
3. |
姚屏,李文强,陈威,何日恒,张佩美,张广潮. 基于鲸鱼优化算法的焊缝尺寸预测. 焊接学报. 2024(11): 133-139 .
![]() |