Advanced Search
WANG Hongfeng, WANG Jianli, ZUO Dunwen, SONG Weiwei, JI Ling. Fatigue analysis of TC11/TC17 heterogeneous titanium alloy linear friction jointing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 81-84.
Citation: WANG Hongfeng, WANG Jianli, ZUO Dunwen, SONG Weiwei, JI Ling. Fatigue analysis of TC11/TC17 heterogeneous titanium alloy linear friction jointing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(5): 81-84.
shu

Fatigue analysis of TC11/TC17 heterogeneous titanium alloy linear friction jointing

  • 1.

    College of Mechanical and Electrical Engineering, Huangshan University, Huangshan 245041, China;College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

  • 2.

    College of Mechanical and Electrical Engineering, Huangshan University, Huangshan 245041, China

  • 3.

    College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

More Information
  • Received Date: November 26, 2015
    Graphical Abstract
    • Abstract
  • Two heterogeneous titanium alloy TC11 and TC17 was jointed by linear friction jointing. The relationship between load and displacement and the relationship between temperature and the fatigue cycle time with increasing temperature under the cyclic loading were analyzed by the fatigue testing machine. The results show that the relationship between load and displacement curve was leaf, and with the increasing of cycle time, leaf width became narrow gradually, finally turned into a straight line. But when the heating temperature increased to more than 1/3 of the titanium alloy melting point, the relationship between load and displacement curve will occur distortion. Temperature increase will reduce the cycle time of jointing plate specimen. The fatigue life reduces with the increase of temperature.
    • FullText(HTML)
    • References (10)
  • Romero J, Athallah M M, Preuss M, et al. Effect of the forging pressure on the microstructure and residual stress development in Ti-6Al-4V linear friction welds[J]. Acta Materialia, 2009, 57: 5582-5592.
    Lang B, Zhang T C, Li X H, et al. Microstructural evolution of a TC11 titanium alloy during linear friction welding[J]. Journal of Materials Science, 2010, 45(2): 6218-6224.
    Karadge M, Preuss M, Lovell C, et al. Texture development in Ti-6A1-4V linear friction welds[J]. Materials Science and Engineering A, 2007, 459: 182-191.
    Vairis A, Frost M. Modelling the linear friction welding of titanium blocks[J]. Materials Science and Engineering A, 2000, 292: 8-17.
    Wanjara P, Jahazi M. Linear friction welding of Ti-6A1-4V: processing, microstructure and mechanical-property inter-relationships[J]. Metallurgical Materials Transactions A, 2005, 36A: 2149-2164.
    季亚娟, 张田仓, 李晓红, 等. TC11/TC17线性摩擦焊飞边及焊缝微区特性分析[J]. 航空制造技术, 2015(11): 62-65. Ji Yajuan, Zhang Tiancang, Li Xiaohong, et al. Micro-area characteristic analysis of TC11/TC17 linear friction welding flash and weld[J]. Journal of Aeronautical Manufacturing Technology, 2015(11): 62-65.
    Li W Y, Ma T J, Zhang Y, et al. Microstructure characterization and mechanical properties of linear friction welded Ti-6A1-4V alloy[J]. Advanced Engineering Materials, 2008, 10 (1-2): 89-92.
    郎 波, 张田仓, 陶 军, 等. TC11钛合金线性摩擦焊界面微观组织演变[J]. 材料工程, 2012(10): 39-43. Lang Bo, Zhang Tiancang, Tao Jun, et al. Microstructral evolution of TC11 titanium alloy at rubbing interface during linear friciton welding[J]. Journal of Material Engineering, 2012(10): 39-43.
    朱小刚, 王联凤, 乔凤斌, 等. 6061-T6铝合金回填式搅拌摩擦点焊疲劳性能分析[J]. 焊接学报, 2014, 35(4): 91-94. Zhu Xiaogang, Wang Lianfeng, Qiao Fengbin, et al. 6061-T6 aluminum alloy backfill type friction stir spot welding fatigue performance analysis[J]. Transactions of the China Welding Institution, 2014, 35(4): 91-94.
    刘 颖, 张田仓, 李 晶, 等. TC4/TC17钛合金线性摩擦焊接头性能分析[C]//西安: 中国航空学会第十届先进材料技术研讨会论文集, 2011.
    • Related Articles

  • Related Articles

    [1]DENG Caiyan, YIN Tinghui, GONG Baoming. Properties of very-high-cycle fatigue of TC11 titanium alloy EBW welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(4): 23-26. DOI: 10.12073/j.hjxb.2018390088
    [2]KONG Da, ZHANG Liang, YANG Fan. Fatigue life prediction of SnAgCu-X solder joints based on Anand model[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(4): 17-21. DOI: 10.12073/j.hjxb.20170404
    [3]HOU Huipeng, TIAN Xiangjun, LIU Dong, WANG Huaming. Microstructure and high-cycle fatigue properties of laser melting deposited TC11 titanium alloy repaired by tungsten argon arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(8): 9-12.
    [4]DENG Caiyan, LIU Xi, WANG Dongpo. Fatigue performance of Q345 steel welded joints by high temperature ultrasonic peening[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(11): 47-50.
    [5]LIN Youzhi, FU Gaosheng, LI Lei, CHEN Jianhong. Non-linear continuum fatigue damage model of TC4 titanium alloy welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (8): 92-96.
    [6]ZHAO Dongsheng, WU Guoqiang, LIU Yujun, LIU Wen, JI Zhuoshang. Effect of welding residual stress on fatigue life of Invar steel welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (4): 93-95,108.
    [7]ZHAO Xiaohui, WANG Dongpo, WANG Xibao, DENG Caiyan, ZU Zhiqiang. Improvement of fatigue performance of TC4 Ti-alloy welded joints by loading ultrasonic peening[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (11): 57-60.
    [8]ZHANG Liang, XUE Songbai, HAN Zongjie, LU Fangyan, YU Shenglin, LAI Zhongmin. Fatigue life prediction of SnAgCu soldered joints of FCBGA device[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (7): 85-88.
    [9]DING Yanchuang, ZHAO Wenzhong. Stiffness coordination strategy for increasing fatigue life and its application in welded structure[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (12): 31-34.
    [10]WU Hua-zhi, GUO Hai-ding, GAO De-ping, XU kai-wang. Establishment of fatigue Fractal damage evolution equation on TC11 Ti alloy welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (12): 93-95,107.

Catalog

    Get Citation
    PDF
    XML
    Article views (501) PDF downloads (290) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return