Advanced Search
LANG Bo, HOU Jinbao, GUO Delun, WU Song. Transient liquid phase (TLP) diffusion bonded single crystal superalloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 93-96.
Citation: LANG Bo, HOU Jinbao, GUO Delun, WU Song. Transient liquid phase (TLP) diffusion bonded single crystal superalloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(12): 93-96.

Transient liquid phase (TLP) diffusion bonded single crystal superalloy

More Information
  • Received Date: March 09, 2014
  • Microstructure of transient liquid phase (TLP) diffusion bonded single crystal superalloy joint was investigated [HJ1.2mm]by using scanning electron microscopy (SEM), and mechanical properties test of joint was carried out, for obtaining relationship between microstructure and mechanical properties of joint. The results showed that the joint was contained by the bonding zone and parent material zone. Before isothermal solidification process was finished, the bonding zone was contained isothermal solidification zone and rapid solidification zone. Metallographic examination revealed that isothermal solidification zone consisted of γ and γ' phases, rapid solidification zone consisted of eutectics. When homogenization process was not enough under the condition of finishing isothermal solidification process, the bonding zone would contain isothermal solidification zone and borides at the interface. It is effectively improved for mechanical properties of joint by welding procedure of "isothermal solidification at relatively low welding temperature and homogenization at relatively high welding temperature".
  • Kim D U, Nishimoto K. Creep rupture and fatigue properties of transient liquid phase bonded joints of Ni base single crystal superalloy[J]. Materials Science and Technology, 2003, 19: 456-460.
    Nishimoto K, Saida K, Kim D, et al. Bonding phenomena and joint properties of transient liquid phase bonding of Ni-base single crystal superalloys[J]. Welding Research Abroad, 1998, 44(11): 48-58.
    李晓红, 毛 唯, 郭万林, 等. DD6单晶合金过渡液相扩散焊工艺[J]. 焊接学报, 2005, 26(4): 51-54. Li Xiaohong, Mao Wei, Guo Wanlin, et al. Transient liquid phase diffusion bonding of a single crystal superalloy DD6[J]. Transactions of the China Welding Institution, 2005, 26(4): 51-54.
  • Related Articles

    [1]DONG Xianchun, ZHANG Nan, ZHANG Xiazhou, TIAN Zhiling. Analysis of reheat embrittlement and softening of coarse-grained zone of Q960E welding joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(5): 56-62. DOI: 10.12073/j.hjxb.20210702002
    [2]CAO Rui, YANG Zhaoqing, LI Jinmei, LEI Wanqing, ZHANG Jianxiao, CHEN Jianhong. Influence of fraction of coarse-grained heat affected zone on impact toughness for 09MnNiDR welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(5): 7-13. DOI: 10.12073/j.hjxb.20190818003
    [3]ZHANG Nan<sup>1,2</sup>, TIAN Zhiling<sup>2</sup>, DONG Xianchun<sup>1</sup>, ZHANG Xi<sup>1</sup>, YANG Jianwei<sup>1</sup>. Research on relationship between ΔKth and fatigue life of heat-affected coarse grain zone in Q960E[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(7): 106-110. DOI: 10.12073/j.hjxb.2018390185
    [4]L&#220; Xiaochun, HE Peng, QIN Jian, DU Bing, HU Zhongquan. Effect of welding thermal cycle on microstructure and properties of intercritically reheated coarse grained heat affected zone in SA508-3 steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(12): 47-49.
    [5]HU Meijuan, WANG Peng, HAN Xinli, JI Lingkang. Microstructure and properties of coarse grain region for high-strain pipeline X80 steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (9): 93-96.
    [6]ZHENG Huaibei, YE Xiaoning, ZHANG Xuefeng, JIANG Laizhu, LIU Zhenyu, WANG Guodong. Microstructure transformation,grain growth and precipitated phase of 12%Cr ferritic stainless steel in coarse grain zone[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (6): 37-40.
    [7]CHAI Feng, SU Hang, YANG Caifu, LUO Xiaobing. Coarse grained region microstructure and properties of high heat input welding DH36 steels[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (12): 25-28.
    [8]ZHANG Xiaoyong, GAO Huilin, ZHUANG Chuanjing, JI Lingkang. Influence of welding heat input on microstructure and properties of coarse grain heat-affected zone in X100 pipeline steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (3): 29-32.
    [9]ZHANG Yingqiao, ZHANG Hanqian, LIU Weiming. Effects of M-A constituent on toughness of coarse grain heat-affected zone in HSLA steels for oil tanks[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (1): 109-112.
    [10]CHAI Feng, YANG Cai-fu, ZHANG Yong-quan, SU Hang, XU Zhou. Coarse-grained heat affected zone microstructure and toughness of copper-bearing age-hardening steels[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (6): 56-60.
  • Cited by

    Periodical cited type(3)

    1. 洪海涛,王璐,王学龙,邵岳锐. 变极性等离子弧焊接电弧光谱数据的预处理算法. 内蒙古工业大学学报(自然科学版). 2021(02): 120-126 .
    2. 张勇,唐家成,葛泽龙,杨泽宇,綦秀玲. 高铝粉煤灰活性剂影响TIG电弧行为研究. 材料科学与工艺. 2020(05): 90-96 .
    3. 董康,吴强. 电弧增材制造过程在线监测技术研究现状与趋势. 表面工程与再制造. 2019(02): 23-27 .

    Other cited types(9)

Catalog

    Article views (458) PDF downloads (211) Cited by(12)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return