Advanced Search
LIU Dianbao, LI Fuquan, TAN Caiwang, CHEN Yanbin, ZHAO Yumei. Microstructure and performance of backing weld joint of EH36 steel thick plate by double-sided arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (1): 81-84.
Citation: LIU Dianbao, LI Fuquan, TAN Caiwang, CHEN Yanbin, ZHAO Yumei. Microstructure and performance of backing weld joint of EH36 steel thick plate by double-sided arc welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (1): 81-84.
shu

Microstructure and performance of backing weld joint of EH36 steel thick plate by double-sided arc welding

  • 1.

    State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China;Bohai Shipbuilding Heavy Industry Co. Ltd., Huludao, Liaoning 125004, China

  • 2.

    State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China

  • 3.

    Bohai Shipbuilding Heavy Industry Co. Ltd., Huludao, Liaoning 125004, China

More Information
  • Received Date: October 28, 2009
    Graphical Abstract
    • Abstract
  • EH36 steel thick plate is widely used in shipbuilding industry.In this paper,double-sided arc welding(DSAW) vertical welding of EH36 steel is carried out by robots,which exhibits distinctive merits and broad prospective in application.Backing weld is the most significant procedure in the multi-layer and multi-pass welding,which exhibits important impact on weld joint.Microstructure and performance of back welding joint were studied.The results indicated that proeutectoid ferrite(PF) and acicular ferrite(AF) were the main structure in the weld joint after DSAW.The structure in the back weld was refined after reheating effect in the subsequent multi-layer and multi-pass welding.Microstructure at coarse-grained zone of backing weld joint was bainite and maetensite lath.The hardness of back weld was slightly lower than that of the second layer bead.Joint tensile strength was higher than that of base metal,and the characteristic of fracture appearance was dimple.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]GUAN Jianjun, YANG Nan, ZHONG Hongyuan, CHEN Huaining, CHEN Jing, SHI Xiaoai. Principle of stress-free welding with cold source or displacement-controled load[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(1): 91-96. DOI: 10.12073/j.hjxb.20190829002
    [2]CHEN Jing, KAN Ying, JIANG Yunlu, CHEN Huaining. Numerical simulation of stress determination coefficients for indentation strain-gage method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(1): 147-150. DOI: 10.12073/j.hjxb.2019400029
    [3]DENG Caiyan, NIU Yaru, GONG Baoming, WANG Dongpo, ZHAO Junmei. Improvement of loading ultrasonic peening on fatigue strength of welded joints under high stress ratio[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(7): 72-76. DOI: 10.12073/j.hjxb.20150713001
    [4]XUE Gang, WANG Tao, FANG Hongyuan. Stress concentration factor equation of heterogeneity joint based on slope angle and material difference[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(8): 95-98.
    [5]FU Lei, CHENG Ronglong, YANG Jianguo, WANG Tao, FANG Hongyuan. Analysis of stress concentration factors of overlap joints based on finite element method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (7): 109-112.
    [6]LI Hao, LI Hua. Release coefficients during measuring non-uniform residual stress with blind-hole method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (6): 85-88.
    [7]WANG Jiajie, DONG Zhibo, ZHANG Jingqiang, LIU Xuesong, FANG Hong yuan. Influence of joint geometric parameters on stress concentration factor for under-matched butt joint under three-point bending load[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (1): 73-76.
    [8]CHEN Tuanhai, CHEN Guoming. Numerical analysis on stress concentration factors of joints in welded T-tube[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (11): 45-48.
    [9]ZHAO Zhili, YANG Jianguo, LIU Xuesong, FANG Hongyuan, WU Fangbin. Finite element calculation and regression analysis on stress concentration factors of undermatching butt joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (7): 109-112.
    [10]Wang Lijun, Zhang Yanhua. Statisic characteristics of stress concentration factor at weld toes[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1992, (2): 92-98.

Catalog

    Get Citation
    PDF
    XML
    Article views (237) PDF downloads (124) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return