Advanced Search
WEI Yanhong, XU Yanli, SUN Yanjie, DONG Zhibo, YANG Chunli. Mechanism of increasing welding penetration with A-TIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (2): 37-40.
Citation: WEI Yanhong, XU Yanli, SUN Yanjie, DONG Zhibo, YANG Chunli. Mechanism of increasing welding penetration with A-TIG welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (2): 37-40.
shu

Mechanism of increasing welding penetration with A-TIG welding

  • 1.

    School of Material Science and Technology, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China;State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology University, Harbin 150001, China

  • 2.

    The Second Academy of China Aerospace Science and Industry Corp, 283 Factory, Beijing 100854, China;State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology University, Harbin 150001, China

  • 3.

    The Second Academy of China Aerospace Science and Industry Corp, 283 Factory, Beijing 100854, China

  • 4.

    State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology University, Harbin 150001, China

More Information
  • Received Date: September 15, 2008
    Graphical Abstract
    • Abstract
  • A-TIG welding has obvious function of increasing welding penetration compared with conventional TIG welding.In this paper, welding flow field and temperature field of nimonic 263 with TIG and A-TIG were simulated and the simulated weld shape and penastration were compared with the experimental results.It is found that the depth of welded molten pool of A-TIG is deeper than that of TIG welding and its width is smaller when the welding current is the same.Moreover, with increasing welding current or decreasing travel speed the depth of welded molten pool of A-TIG increases linealy and the increase is more remarkable for the A-TIG than the TIG welding.The mechanism of increasing welding penetration by A-TIG welding is further deduced by simulating the fluid flow mode in the welded molten pool.It is indicated that flow mode in welding pool is the major factor which causees the increase of welding penetration.The flow rate in the center is obviously larger than that at the edge of the welded molten pool and the circular flow from the outside to the inside is the leading flow direction and brings the fluid with high temperature in the edge to the center which leads to the increase of metal melting rate in the center than that in the edge.Besides, the effect of increasing welding penetration is enhanced constantly by increasing welding current.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]HUANG Chaoqun1, LI Huan1, LUO Chuanguang1,2, SONG Yonglun3. Comparative study of blind hole method and indentation method in measuring residual stress of 2219 aluminum alloy arc-welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(7): 54-58. DOI: 10.12073/j.hjxb.20150710004
    [2]SUN Jiantong, LI Xiaoyan, ZHANG Liang, YAO Wentao. Study of residual stress measurement of rolling aluminum alloy using x-Ray diffraction method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(1): 61-64.
    [3]LIU Chuan, FENG Jun, ZHU Haiyang, LI Liangbi. Internal residual stress measurement of inertia friction welding joints based on contour method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(6): 1-4.
    [4]LI Hao, LIU Yihua. Residual stress field in hole-drilling method-part II:application[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (10): 33-36.
    [5]FU Peng-fei, LIU Fang-jun, FUGang, MAO Zhi-yong. Weld residual stress distribution of GH536 superalloy with EBW measuned by Mathar method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (11): 21-23.
    [6]YA Min, DAI Fu-long, LU Jian. Study on Residual Stress of Friction Stir Welding by Moiré Interferometry and Hole-Drilling Method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (5): 53-56.
    [7]REN Wei-jia, WU Ai-ping, ZHAO Hai-yan, ZOU Gui-sheng. Finite Element Method Analysis on Welding Residual Stresses of Large Electromotor Rotor[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (2): 92-96.
    [8]QI Xin, CHEN Juan, LIU Dian-kui. Assembly by Means of Local Magnetization Method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (3): 1-4.
    [9]Chen Huaining, Chen Liangshan, Dong Xiuzhong. Drilling strains in measuring residual stress with hole-drilling strain-gage method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (4): 276-280.
    [10]Meng Gongge. Reliability and precision of blind hole drilling method for determining high residual stresses[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1991, (4): 235-238.

Catalog

    Get Citation
    PDF
    XML
    Article views (274) PDF downloads (175) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return