Citation: | BAI Shiwu, LI Wushen, DI Xinjie, WU Qiang. Toughness mechanism of CGHAZ of 07MnNiCrMoVDR steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (3): 25-28. |
[1] | DONG Xianchun, ZHANG Nan, ZHANG Xiazhou, TIAN Zhiling. Analysis of reheat embrittlement and softening of coarse-grained zone of Q960E welding joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(5): 56-62. DOI: 10.12073/j.hjxb.20210702002 |
[2] | LI Liying, WANG Xiaolei, LIU Zhenhong, ZHOU Cong, HAN Bin. Microstructure and low temperature toughness of HAZ of domestic 06Ni9DR Steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(7): 91-96. DOI: 10.12073/j.hjxb.20200202002 |
[3] | ZHANG Lihong, CHEN Furong, CHANG Jiangang. Effect of weld thermal cycle on low temperature toughness of 09MnNiDR steel heat affected zone[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(3): 91-96. DOI: 10.12073/j.hjxb.20190911002 |
[4] | DONG Liming, YANG Li, DAI Jun, PAN Xin, ZHANG Yu. Development of submerged arc welding wire for fabrication of hot bend low-temperature pipeline steel K65 pipe[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(12): 120-124. |
[5] | LIU Junsong, CHEN Xuedong, BU Huaquan. Analyses of reheat cracking sensitivity and test methods for 07MnNiVDR steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(4): 71-74. |
[6] | YAN Keng, YE Fengyu, LIU Wei. Effect of heat inputs on low temperature toughness of F550Z steel welding joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(3): 93-96. |
[7] | LI Liying, WANG Yong, LI Hongwei, HAN Tao, LI Chaowen. Microstructure and toughness in reheated CGHAZ of ASTM4130 steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (6): 33-36. |
[8] | YAN Chunyan, LI Wushen, XUE Zhenkui, BAI Shiwu, FENG Bin. ffects of welding parameters on cryogenic toughness in heat-affected zones for 9% Ni steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (10): 101-104. |
[9] | ZHANG Jianjun, LI Wushen, DI Xinjie, WU Qiang. Prediction of performance of heat affected zone and optimization on welding parameters of 07MnNiCrMoVDR steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (3): 29-32. |
[10] | YAO Qin. Mechanism of HQ-80 steel reheat crack[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (6): 77-81. |