Advanced Search
FANG Chenfu, YU Jiajun, CHEN Shujun, SONG Yonglun. Effects of VPTIG welding current parameters on arc shape and weld quality[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (12): 21-25.
Citation: FANG Chenfu, YU Jiajun, CHEN Shujun, SONG Yonglun. Effects of VPTIG welding current parameters on arc shape and weld quality[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (12): 21-25.

Effects of VPTIG welding current parameters on arc shape and weld quality

More Information
  • Received Date: July 07, 2007
  • With high-speed video system and memory realtime oscilloscope gathering welding current and arc shape information of variable polarity TIG (VPTIG)welding, effects of five parameters including welding current frequency, DCEP(direct current electrode positive)and DCEN (direct current electrode negative)time, DCEP and DCEN current amplitude on arc shape information and quality of weld were analyzed.The experiment showed that arc shape, arc welding pieces of power and heat input can be controlled by regulating the five parameters, which not only could control penetration, both sides of weld and liquidation district width on both sides of weld, but also reduced the loss of tungsten electrode.VPTIG welding craft for aluminum alloy with plate docking and low frequency impulse modulation were adopted, and the depth of fusion of single pass welding could reach 6 mm.Meanwhile, good appearance of weld and reliable quality of welded joint could be obtained
  • Related Articles

    [1]LIANG Enbao, HU Shengsun, WANG Zhijiang. Optimization of GTAW cladding process of Inconel 625 on carbon steel using response surface methodology[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(6): 85-88,108.
    [2]DU Xianchang, WANG Yi, GUO Shulan, YANG Chunguang. Uniform design and optimization of active flux for A-TIG welding of AZ31B magnesium alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(4): 67-70.
    [3]JIANG Wenchun, YANG Bin, ZHANG Yucai, GONG Jianming. Structure optimization of T-nozzle in hydrogenated reactor[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (6): 49-52.
    [4]ZHOU Guangtao, LIU Xuesong, YAN Dejun, FANG Hongyuan. Prediction for welding deformation reducing by welding sequence optimization of upper plate[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (9): 109-112.
    [5]SHU Fuhua. Friction welding technological parameter optimization based on LSSVM and AFSA[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (12): 104-108.
    [6]ZHANG Guodong, XUE Jilin, ZHOU Chang Yu. Optimization on welding procedure of high temperature pipeline based on orthogonal test design[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (11): 53-56.
    [7]ZHAO Xin, ZHANG Yan-song, CHEN Guan-long, ZHANG Xiao-yun. Performance prediction in spot welding of body galvanized steel sheets based on artificial neural network and its optimization[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (12): 77-80,84.
    [8]LIU Xue-mei, YAO Jun-shan, ZHANG Yan-hua. Optimization for friction surfacing parameters[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (6): 99-102.
    [9]Wang Xinzhi, Chen Wuzhu, Cheng Shihong. A New Method for Optimizing Welding Inverter Using Assisting Circuit[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1998, (1): 56-61.
    [10]Gang Tie, Takayoshi OHJI. On-line idcntification of mathematical model parameters and selection of optimized welding parameters[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1992, (4): 225-230.

Catalog

    Article views (306) PDF downloads (198) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return