- Ei Compendex
- Scopus
- DOAJ
- Chinese Science Citation Database (CSCD)
- World Journals Clout Index Report
- T1 level in Directory for Mechanical EngineeringDisciplines
| Citation: |
SUN Qingjie, ZHANG Qinghua, ZHAO Yongqing, GUO Jiawei, LI Tianyou, BAN Huakang, HOU Shaojun. Local dry underwater TIG welding process of positioning pin in nuclear power plant[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2024, 45(2): 7-12. DOI: 10.12073/j.hjxb.20230313003
|
Taking the underwater welding of positioning pin in nuclear power plant as the research object, an underwater TIG welding gun with double-layer gas protection is developed. The motion trajectory is realized by DC motor driving the tungsten pole to rotate around a fixed diameter. The nuclear grade material Z2CN19-10 nitrogen-controlled stainless steel was welded. The weld formation of local dry underwater TIG welding was studied. The process parameters were optimized. The microstructure and mechanical properties of the joint were analyzed by combining the thermal cycle curve and arc shape. The results show that when the inner and outer layers are filled with argon, the weld is well formed and the arc shape is stable. Increasing the welding current or reducing the welding speed increases the weld penetration and the weld width. By comparing the underwater and onshore welded joints, it is found that the rapid cooling of water will promote the ferrite near the fusion line to change from dendritic to lath, reduce the austenite content and refine the grain. The microhardness and mechanical properties of underwater joints are slightly higher than those of onshore joints.
| [1] |
Jia C B, Zhang Y, Zhao B, et al. Visual sensing of the physical process during underwater wet FCAW[J]. Welding Journal, 2016, 95(6): 202 − 209.
|
| [2] |
马兆炫, 刘一搏, 王建峰, 等. 双相不锈钢水下局部干法TIG焊接工艺[J]. 机械工程学报, 2022, 58(4): 48 − 54. doi: 10.3901/JME.2022.04.048
Ma Zhaoxuan, Liu Yibo, Wang Jianfeng, et al. Underwater local dry tig welding of duplex stainless steel[J]. Journal of Mechanical Engineering, 2022, 58(4): 48 − 54. doi: 10.3901/JME.2022.04.048
|
| [3] |
韩雷刚, 钟启明, 陈国栋, 等. 局部干法水下焊接技术的发展[J]. 浙江大学学报, 2019, 53(7): 1252 − 1264.
Han Leigang, Zhong Qiming, Chen Guodong, et al. Development of local dry underwater welding technology[J]. Journal of Zhejiang University, 2019, 53(7): 1252 − 1264.
|
| [4] |
沈相星, 程方杰, 邸新杰, 等. 水下局部干法焊接预热技术及专用排水罩的研制[J]. 焊接学报, 2018, 39(3): 112 − 116.
Shen Xiangxing, Fangjie Cheng, Xinjie Di, et al. Local-dry underwater welding preheating technology and development of special drain cover[J]. Transactions of the China Welding Institution, 2018, 39(3): 112 − 116.
|
| [5] |
Wang Z M, Xie F X, Feng Y L, et al. Underwater robot local dry welding system[J]. China Welding, 2019, 28(4): 22 − 27.
|
| [6] |
Fu Y L, Guo N, Cheng Q, et al. Underwater laser welding for 304 stainless steel with filler wire[J]. Journal of Materials Research and Technology, 2020, 9(6): 15648 − 15661. doi: 10.1016/j.jmrt.2020.11.029
|
| [7] |
Liao H P, Li X Y, Chi P, et al. Effect mechanism of arc oscillation on microstructure and mechanical performance of SUS304 weld seams manufactured by local dry underwater double pulsed MIG welding[J]. Materials Science and Engineering, 2023, 887: 145752. doi: 10.1016/j.msea.2023.145752
|
| [8] |
Guo N, Fu Y L, Xing X, et al. Underwater local dry cavity laser welding of 304 stainless steel[J]. Journal of Materials Processing Technology, 2018, 260: 146 − 155. doi: 10.1016/j.jmatprotec.2018.05.025
|
| [9] |
Han L G, Wu X, Chen G D, et al. Local dry underwater welding of 304 stainless steel based on a microdrain cover[J]. Journal of Materials Processing Technology, 2019, 268: 47 − 53. doi: 10.1016/j.jmatprotec.2018.12.029
|
| [10] |
任伟, 吴冰洁, 邱阳, 等. 控氮304不锈钢热变形过程中的动态再结晶行为研究[J]. 西安交通大学学报, 2021, 55(3): 145 − 154.
Ren Wei, Wu Bingjie, Qiu Yang, et al. Dynamic recrystallization behavior of nitrogen-controlled 304 stainless steel in hot deformation[J]. Journal of Xi'an Jiaotong University, 2021, 55(3): 145 − 154.
|
Supported by:
Beijing Renhe Information Technology Co. Ltd
DownLoad: