Advanced Search
DENG Caiyan, ZENG Chao, GONG Baoming, WANG Jinsheng, WANG Dongpo. Modification and application of ultrasonic fatigue stress calculation methods based on numerical methods[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(7): 1-6. DOI: 10.12073/j.hjxb.20211202007
Citation: DENG Caiyan, ZENG Chao, GONG Baoming, WANG Jinsheng, WANG Dongpo. Modification and application of ultrasonic fatigue stress calculation methods based on numerical methods[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(7): 1-6. DOI: 10.12073/j.hjxb.20211202007

Modification and application of ultrasonic fatigue stress calculation methods based on numerical methods

More Information
  • Received Date: December 01, 2021
  • Available Online: August 01, 2022
  • Finite element method was used to design the dimensions of ultrasonic fatigue specimens of 6082-T6 aluminium alloy base material and its joints, where taking into account the effect of amplifiers (here called the holistic method). A comparison made with the dimensions of ultrasonic fatigue specimens designed by the conventional analytical method, shows that the resonant frequencies of the specimens obtained by the holistic method are closer to the test frequencies, and were almost independent of the preload and applied loads. Howerver, the stress-displacement coefficients differed significantly from those of the conventional analytical method. The ultrasonic fatigue test data of friction stir welding joints of 6082-T6 aluminium alloy at stress ratios of R = −1 and R = 0.1 were also compared and analysed by two methods. It is found that the fatigue strength obtained by the holistic method is high when R = −1, but there is almost no difference between the two methods when R = 0.1.
  • 丁叁叁, 陈大伟, 刘加利. 中国高速列车研发与展望[J]. 力学学报, 2021, 53(1): 35 − 50.

    Ding Sansan, Chen Dawei, Liu Jiali. Research, development and prospect of China high-speed train[J]. Chinese Journal of Theoretical and Applied Mechanics, 2021, 53(1): 35 − 50.
    王颖, 王东坡, 丁吉坤, 等. 薄板对接超声疲劳试样设计方法及其误差分析[J]. 焊接学报, 2019, 40(1): 71 − 74. doi: 10.12073/j.hjxb.2019400014

    Wang Ying, Wang Dongpo, Ding Jikun, et al. Design method and error analysis of thin plate butt welded joint specimen for ultrasonic fatigue test[J]. Transactions of the China Welding Institution, 2019, 40(1): 71 − 74. doi: 10.12073/j.hjxb.2019400014
    Kikukawa M, Ohji K, Ogura K. Push-pull fatigue strength of mild steel at very high frequencies of stress up to 100 kc/s[J]. Transactions of the Japan Society of Mechanical Engineers, 1965, 32(235): 363 − 370.
    Naito T, Ueda H, Kikuchi M. Fatigue behavior of carburized steel with internal oxides and nonmartensitic microstructure near the surface[J]. Metallurgical Transactions A, 1984, 15(7): 1431 − 1436. doi: 10.1007/BF02648572
    Liu F, Zhang H, Liu H, et al. Influence of welded pores on very long-life fatigue failure of the electron beam welding joint of TC17 titanium alloy[J]. Materials, 2019, 12(11): 1825 − 1841.
    Jin X, Xu L, Yu W, et al. Effect of hydrogen on the very high cycle fatigue properties of quenched and tempered steels containing (Ti, Mo)C precipitates[J]. Rare Metal Materials and Engineering, 2021, 50(2): 458 − 468.
    Nie B, Chen D, Zhao Z, et al. Notch effect on the fatigue behavior of a TC21 titanium alloy in very high cycle regime[J]. Applied ences, 2018, 8(9): 1614 − 1626.
    Wang Yue, Chai Peng, Guo Xiaojuan, et al. Effect of connection processes on mechanical properties of 7B04 aluminum alloy structures[J]. China Welding, 2021, 30(2): 50 − 57.
    Yang K, Zhong B, Huang Q, et al. Stress ratio effect on notched fatigue behavior of a Ti-8Al-1Mo-1V alloy in the very high cycle fatigue regime[J]. International Journal of Fatigue, 2018, 116: 80 − 89.
    吴良晨. 超声频分量双周疲劳载荷作用下焊接接头的疲劳性能[D]. 天津: 天津大学, 2008.

    Wu Liangchen. Fatigue performance of welded joints under combined cycle fatigue with ultrasonic component[D]. Tianjin: Tianjin University, 2008.
    韩青松. 焊后热处理对7050-T7451铝合金搅拌摩擦焊接头力学行为的影响[D]. 天津: 天津大学, 2020.

    Han Qingsong. Effects of PWHT on the mechanical behaviors of 7050-T7451 aluminum friction stir welding joint[D]. Tianjin: Tianjin University, 2020.
    王勖成, 邵敏. 有限单元法基本原理和数值方法[M]. 北京: 清华大学出版社, 1997.

    Wang Xucheng, Shao Min. Basic principles and numerical methods of the finite unit method[M]. Beijing: Tsinghua University Press, 1997.
  • Related Articles

    [1]WAN Yu, ZHANG Xuyang, JIANG Wenchun, ZHANG Baisheng, LEI Chenglong, LI Zhijie. Degradation behavior and mechanisms of strength and toughness in double-wire narrow-gap submerged arc welded joints of 2.25Cr-1Mo-0.25V steel thick plates for hydrogenation reactors[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2025, 46(5): 113-120. DOI: 10.12073/j.hjxb.20240706001
    [2]ZHOU Guangtao, KUANG Jingzhen, WEN Qiuling, CAI Zupeng, SU Liji. Microstructure and property of copper laser welding joint assisted by the surface pretreated by nanosecond laser direct writing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(4): 21-29. DOI: 10.12073/j.hjxb.20220908002
    [3]LIU Xinquan, FANG Chao, LIU Jin, SONG Kuijing, JI Yukai, WEI Yong, LUO Junrui. Microstructure analysis of additive manufacturing produced RAFM steel laser welding joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(9): 44-49. DOI: 10.12073/j.hjxb.20211213003
    [4]TENG Bin, WU Pengbo, LI Xiaoguang, ZOU Jipeng, WANG Shiyang, CHEN Xiaoyu, JIA Lichao. Microstructure and properties of GH3128 alloy laser welding joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(7): 82-87. DOI: 10.12073/j.hjxb.20220406001
    [5]CUI Li, LI Xiaoyan, HE Dingyong, CHEN Li, GONG Shuili. Microstructure investigation of Nd:YAG laser welded 5A90 aluminium-lithium alloys[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (9): 77-80,84.
    [6]LI Hongmei, SUN Daqian, WANG Wenquan, XUAN Zhaozhi, REN Zhenan. Microstructure and mechanical properties of austenite stainless steel wire joints welded by laser[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (6): 71-74.
    [7]ZHANG Min, YAO Cheng-wu, LIU Bin, LI Ji-hong. Agglomerated alkali flux for submerged arc welding of high strength-toughness steel X80[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (10): 29-32.
    [8]WEN Peng, ZHANG Xu-dong, CHEN Wu-zhu, Henry Peng. Buckling distortion of laser welded thin plates and its control by dynamic cooling[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (9): 99-102.
    [9]YU Sheng-fu, ZHANG You-shou, LEI Yi, XIE Zhi-qiang, WU Dong-zhou, LIU Ping. Mechanisms of rotational magnetic field stirring of laser welded nonmagnetic alloy for laser welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (3): 109-112.
    [10]HAN Guo-ming, LI Jian-qiang, YAN Qing-liang. Modeling and simulating of temperature field of laser welding for stainless steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (3): 105-108.

Catalog

    Article views (416) PDF downloads (81) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return