Advanced Search
MAO Xiaodong, GU Ningjie, SONG Xiaoyu, REN Simeng, LU Liying, LI Hutian. Effect of welding wire composition on microstructure and properties of 5E61 aluminum alloy TIG welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(4): 86-93. DOI: 10.12073/j.hjxb.20211024001
Citation: MAO Xiaodong, GU Ningjie, SONG Xiaoyu, REN Simeng, LU Liying, LI Hutian. Effect of welding wire composition on microstructure and properties of 5E61 aluminum alloy TIG welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(4): 86-93. DOI: 10.12073/j.hjxb.20211024001

Effect of welding wire composition on microstructure and properties of 5E61 aluminum alloy TIG welded joints

More Information
  • Received Date: October 23, 2021
  • Available Online: June 14, 2022
  • To study the effect of welding wire composition on the microstructure and properties of 5E61 aluminum alloy ship plates welding joints, the tungsten intert-gas (TIG) welding of 4 mm 5E61-H116 aluminum alloy ship plate was conducted using Wire-1561, Wire-5B71 and Wire-5E61 welding wires. The welded joints' surface morphology, forming quality, microstructure, and mechanical properties were analyzed. The results showed that the welding quality of the three kinds of welding joints performed well under the same welding process, and there were no visible porosities in the welding center zone. The microstructure of the welding zones was different. The grain size of the welding zone by Wire-5B71 was the smallest, followed by Wire-5E61, and the one of Wire-1561 was the largest. Due to the solution strength of the Mg element and the refined crystalline strength of Er element, the microhardness of the welding joint by Wire-5E61 performed the highest. The extension tests of welding joints have proceeded. The results showed the fracture locations of the joints were mainly located along the columnar crystal region near the fusion lines, where the microhardness displayed the lowest. The tensile strength of weld joints prepared by Wire-1561, Wire-5B71 and Wire-5E61 were 322, 323 and 338 MPa, respectively. The welding coefficients were 0.83, 0.84 and 0.88, respectively, and the elongations after fracture were 13.0%, 14.5% and 14.5%, respectively, which can meet practical engineering applications.
  • Xu P, Jiang F, Meng S, et al. Microstructure and mechanical properties of Al-Mg-Sc-Zr alloy variable polarity plasma arc welding joint[J]. Journal of Materials Engineering and Performance, 2018, 27(9): 4783 − 4790. doi: 10.1007/s11665-018-3549-6
    董春林, 赵运强, 温林秀, 等. 1561铝合金搅拌摩擦焊接头微观组织分析[J]. 焊接学报, 2020, 41(10): 1 − 5. doi: 10.12073/j.hjxb.202000709002

    Dong Chunlin, Zhao Yunqiang, Wen Linxiu, et al. Study on microstructures of friction stir welded joint of 1561 aluminum alloy[J]. Transactions of the China Welding Institution, 2020, 41(10): 1 − 5. doi: 10.12073/j.hjxb.202000709002
    雷玉成, 崔展祥, 路广遥, 等. 超声电弧对6061铝合金MIG焊接头组织和性能的影响[J]. 焊接学报, 2020, 41(2): 33 − 38. doi: 10.12073/j.hjxb.20191006002

    Lei Yucheng, Cui Zhanxiang, Lu Guangyao, et al. Effect of arc-ultrasonic on the microstructure and properties of 6061 aluminum alloy joint with MIG welding[J]. Transactions of the China Welding Institution, 2020, 41(2): 33 − 38. doi: 10.12073/j.hjxb.20191006002
    Liu Y, Wang W, Xie J, et al. Microstructure and mechanical properties of aluminum 5083 weldments by gas tungsten arc and gas metal arc welding[J]. Materials Science & Engineering A, 2012, 549(15): 7 − 13.
    Gungor B, Kaluc E, Taban E, et al. Mechanical and microstructural properties of robotic cold metal transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys[J]. Materials and Design, 2014, 54: 207 − 211. doi: 10.1016/j.matdes.2013.08.018
    徐锴, 武鹏博, 梁晓梅, 等. 铝合金激光-多股绞合焊丝MIG复合焊特性分析[J]. 焊接学报, 2021, 42(1): 16 − 23. doi: 10.12073/j.hjxb.20201120003

    Xu Kai, Wu Pengbo, Liang Xiaomei, et al. Analysis of characteristics of aluminum alloy laser multi stranded welding wire MIG hybrid welding[J]. Transactions of the China Welding Institution, 2021, 42(1): 16 − 23. doi: 10.12073/j.hjxb.20201120003
    王虎, 靳立坤, 彭云. 新型Al-Mg-Mn-Er合金TIG焊接头的微观组织及力学性能[J]. 焊接学报, 2020, 41(3): 74 − 79.

    Wang Hu, Jin Likun, Peng Yun. Microstructure and mechanical properties of joints of a new Al-Mg-Mn-Er alloy by TIG welding[J]. Transactions of the China Welding Institution, 2020, 41(3): 74 − 79.
    闫德俊, 韩端锋, 王毅, 等. 1561铝合金双面双弧TIG焊接接头的组织和力学性能[J]. 中国有色金属学报, 2016, 26(10): 2065 − 2070.

    Yan Dejun, Han Duanfeng, Wang Yi, et al. Microstructure and mechanical properties of 1561 aluminum alloy joints made by double-sided arc welding[J]. The Chinese Journal of Nonferrous Metals, 2016, 26(10): 2065 − 2070.
    闫朝阳, 蒋凡, 陈树君, 等. 5E61铝合金VPPAW焊接接头性能分析[J]. 焊接学报, 2018, 39(2): 19 − 23.

    Yan Zhaoyang, Jiang Fan, Chen Shujun, et al. Microstructure and mechanical properties of 5E61 aluminum alloy joint by VPPAW[J]. Transactions of the China Welding Institution, 2018, 39(2): 19 − 23.
    Wen S P, Wang W, Zhao W H, et al. Precipitation hardening and recrystallization behavior of Al-Mg-Er-Zr alloys[J]. Journal of Alloys and Compounds, 2016, 687: 143 − 151. doi: 10.1016/j.jallcom.2016.06.045
    吴浩, 郑志凯, 任思蒙, 等. 微量Er和Zr对Al-Mg合金再结晶行为和焊接性能的影响[J]. 中国有色金属学报, 2021, 31(2): 289 − 297. doi: 10.11817/j.ysxb.1004.0609.2021-39688

    Wu Hao, Zheng Zhikai, Ren Simeng, et al. Effects of Er and Zr micro-additions on recrystallization behavior and welding properties of Al-Mg alloy[J]. The Chinese Journal of Nonferrous Metals, 2021, 31(2): 289 − 297. doi: 10.11817/j.ysxb.1004.0609.2021-39688
  • Cited by

    Periodical cited type(3)

    1. 高成龙,李宪爽,徐祥久. 钛与钢异种材料焊接技术的研究进展. 电站辅机. 2024(01): 23-29 .
    2. 刘自刚,徐睦忠,谭超,傅如斌,代锋先. 钛/钢异种金属熔化焊研究现状与展望. 材料导报. 2024(S2): 358-361 .
    3. 王俊恒,李锡伟,唐兴全,向强,蒋雪梅. TA2阵列式密集焊缝的TIG自动焊技术. 压力容器. 2022(02): 83-88 .

    Other cited types(2)

Catalog

    Article views (228) PDF downloads (35) Cited by(5)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return