Advanced Search
ZHU Chenying, SUN Zhipeng, WANG Yu. Properties of induction brazing diamond/Ni-based alloy composite coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(2): 106-112. DOI: 10.12073/j.hjxb.20210521003
Citation: ZHU Chenying, SUN Zhipeng, WANG Yu. Properties of induction brazing diamond/Ni-based alloy composite coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(2): 106-112. DOI: 10.12073/j.hjxb.20210521003

Properties of induction brazing diamond/Ni-based alloy composite coating

More Information
  • Received Date: May 20, 2021
  • Available Online: February 24, 2022
  • Diamond /Ni-based alloy composite coating was made on the surface of 45 steel by induction brazing process. The hardness and wear resistance of the coating were tested by Rockwell hardness tester and abrasive wear tester, and the morphology of the coating, brazing filler metal and diamond were observed by ultra-depth of field microscopy and scanning electron microscopy, the micro-region compositions on the diamond surface were analyzed by energy dispersive spectroscopy. The micro-morphology, wear laws and mechanisms of the coating were preliminarily studied. The results showed that the diamond is dispersed in the Ni-based alloy composite coating and achieved a good metallurgical bond with the brazing alloy. The increase in the content of diamond particles can significantly improve the hardness and wear resistance of the coating. When the mass fraction is 20%, the macrohardness reached 63 HRC, which was 1.5 times higher than that of the pure brazing coating; under the same wear test conditions, the wear loss of the pure brazing filler metal coating reached 0.335 4 g while the 20% diamond/Ni-based alloy composite coating was 0.097 9 g, which was only 29.2% of the pure brazing filler metal coating.
  • 曹忠溪, 周玉梅, 张凤林, 等. 钎焊金刚石耐磨涂层制备及其磨损性能[J]. 金刚石与磨料磨具工程, 2019, 39(3): 93 − 101.

    Cao Zhongxi, Zhou Yumei, Zhang Fenglin, et al. Preparation and wear resistance of brazed diamond wear resistant coatings[J]. Diamond & Abrasives Engineering, 2019, 39(3): 93 − 101.
    Cui Bin, Tao Shanren, Xue Xingya, et al. A brief review of brazing diamond in cutting tools[J]. China Welding, 2019, 28(2): 56 − 64.
    Oskolkova T N, Glezer A M. Wear-resistant coatings on WC–Co hard alloys synthesized by concentrated energy flows[J]. Inorganic Materials: Applied Research, 2019, 10(1): 146 − 154.
    Kang A S, Cheema G S, Singla S. Wear behavior of hardfacings on rotary tiller blades[J]. Procedia Engineering, 2014, 97: 1442 − 1451. doi: 10.1016/j.proeng.2014.12.426
    赵建国, 李建昌, 王安, 等. 喷焊余温淬火改善深松铲尖铁基涂层耐磨性[J]. 农业工程学报, 2018, 34(3): 65 − 71. doi: 10.11975/j.issn.1002-6819.2018.03.009

    Zhao Jianguo, Li Jianchang, Wang An, et al. Improvement of wear resistance of iron base coating on deep loosen spade tip by spray-welding residual temperature quenching[J]. Transactions of the Chinese Society of Agricultural Engineering, 2018, 34(3): 65 − 71. doi: 10.11975/j.issn.1002-6819.2018.03.009
    Karoonboonyanan S, Salokhe V M, Niranatlumpong P. Wear resistance of thermally sprayed rotary tiller blades[J]. Wear, 2007, 263(1): 604 − 608.
    宋月鹏, 王伟, 高东升, 等. 基于表面工程技术制备农机刃具的研究现状[J]. 中国农机化学报, 2018, 39(1): 27 − 31.

    Song Yuepeng, Wang Wei, Gao Dongsheng, et al. Research status of agricultural machinery cutting tools based on surface engineering technology[J]. Journal of Agricultural Mechanization, 2018, 39(1): 27 − 31.
    赫青山, 崔仲鸣, 傅玉灿, 等. 型面约束下的真空钎焊金刚石工艺及其等高性分析[J]. 焊接学报, 2020, 41(2): 39 − 42. doi: 10.12073/j.hjxb.20191106006

    He Qingshan, Cui Zhongming, Fu Yucan, et al. brazing diamond process and contour analysis under profile constraint[J]. Transactions of the China Welding Institution, 2020, 41(2): 39 − 42. doi: 10.12073/j.hjxb.20191106006
    秦建, 龙伟民, 路全彬, 等. 金刚石/NiCrBSi钎涂接头组织与耐磨性能分析[J]. 材料导报, 2020, 34(S2): 1457 − 1461.

    Qin Jian, Long Weimin, Lu Quanbin, et al. Microstructure and wear resistance analysis of diamond /NiCrBSi brazing joints[J]. Materials Review, 2020, 34(S2): 1457 − 1461.
    Huang Guoqin, Wang Yingda, Zhang Meiqin, et al. Brazing diamond grits onto AA7075 aluminium alloy substrate with Ag–Cu–Ti filler alloy by laser heating[J]. Chinese Journal of Aeronautics, 2021, 34(6): 67 − 78.
    Qin Jian, Huang Junlan, Long Weimin, et al. Evolution behavior of phase and performance in Ni-based coating layer based on high temperature thermal field[J]. China Welding, 2020, 29(4): 25 − 32.
    Qi Wenchun, Lu Jinbin, Li Yang, et al. Vacuum brazing diamond grits with Cu-based or Ni-based filler metal[J]. Journal of Materials Engineering and Performance, 2017, 26(8): 4112 − 4120. doi: 10.1007/s11665-017-2804-6
    Prithviraj Mukhopadhyay, D Raghava Simhan, Amitava Ghosh. Challenges in brazing large synthetic diamond grit by Ni-based filler alloy[J]. Journal of Materials Processing Technology, 2017, 250: 390 − 400. doi: 10.1016/j.jmatprotec.2017.08.004
    Long Weimin, Liu Dashuang, Wu Aiping, et al. Influence of laser scanning speed on the formation property of laser brazing diamond coating[J]. Diamond and Related Materials, 2020(110): 108085.
    Jiang Chengyu, Liu Geng, Zhang Dinghua, et al. Induction brazing diamond grinding wheel with Ni-Cr filler alloy[J]. Materials Science Forum, 2006, 51: 377 − 380.
    龙伟民, 郝庆乐, 傅玉灿, 等. 金刚石工具钎焊用连接材料研究进展[J]. 材料导报, 2020, 34(23): 23138 − 23144. doi: 10.11896/cldb.20100102

    Long Weimin, Hao Qingle, Fu Yucan, et al. Research progress of joints for brazing of diamond tools[J]. Materials Review, 2020, 34(23): 23138 − 23144. doi: 10.11896/cldb.20100102
    Burkhard G, Zieglich B, Poletius M, 等. 用有序排列的金刚石或立方氮化硼磨料作切削加工[J]. 超硬材料工程, 2006(3): 50 − 55.

    Burkhard G, Zieglich B, Poletius M, et al. Cutting with ordered array of diamond or cubic boron nitride abrasives[J]. Superhard Materials Engineering, 2006(3): 50 − 55.
    李灿, 刘小萍, 郑强, 等. 等离子喷涂含金刚石微粉的Cr2O3涂层干摩擦磨损性能研究[J]. 真空科学与技术学报, 2016, 36(8): 873 − 879.

    Li Can, Liu Xiaoping, Zheng Qiang, et al. Study on dry friction and wear properties of Cr2O3 coating with diamond powder by plasma spraying[J]. Journal of Vacuum Science and Technology, 2016, 36(8): 873 − 879.
    王志军. 激光钎焊金刚石颗粒界面结合特征及磨损性能研究[D]. 长沙: 长沙理工大学, 2020.

    Wang Zhijun. Research on the interface bonding characteristics and wear properties of laser brazed diamond particles[D]. Changsha: Changsha University of Science and Technology, 2020.
    Chen Yan, Fu Yucan, Su Honghua, et al. The effects of solder alloys on the morphologies and mechanical properties of brazed diamond grits[J]. International Journal of Refractory Metals and Hard Materials, 2014, 42: 23 − 29. doi: 10.1016/j.ijrmhm.2013.10.003
    邓钺. 金刚石磨损特征评价及其对材料加工影响研究[D]. 泉州: 华侨大学, 2020.

    Deng Yue. Evaluation of diamond wear characteristics and its influence on material processing[D]. Quanzhou: Huaqiao University, 2020.
  • Related Articles

    [1]LIU Zhengjun, LI Lecheng, ZONG Lin, SU Yunhai, SU Ming. Microstructures and wear resistance of Ni-based PLA surfacing layer with introducing magnetic field[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (2): 53-56.
    [2]ZONG Lin, LIU Zhengjun, GAO Hailiang, LI Lecheng. Research on wear resistance of compound material surfacing alloy with high vanadium content[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (9): 41-44,48.
    [3]WANG Zhenting, QIN Lifu. Microstructure and wear resistance of argon arc cladding Ni-Mo-Zr-WC-B4_C composite coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (8): 13-16.
    [4]LU Jinbin, LIANG Cun, PENG Zhuqin, ZHANG Zhaojun. Microstructure and wear resistance of plasma cladding Al2O3+TiO2/Fe alloy composite coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (12): 33-36.
    [5]LU Binfeng, LU Fenggui, TANG Xinhua, YAO Shun. Wear resistance of chromium carbides coating alloyed by vacaumelectron beam[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (11): 77-80.
    [6]HE Dingyong, XU Jing, MA Ran, JIANG Jianmin, WANG Zhihui. Wear resistance properties of micron-WC reinforced Ni60 coating by high frequency induction cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (8): 1-4.
    [7]WANG Zhong-wei, ZHANG Qing-hui, XIAO Yi-feng. Nickel-based high temperature wear-resistant non-slag hardfacing electrode and its heat treatment process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (1): 109-112.
    [8]SI Song-hua, YUAN Xiao-min, XU Kun, He Yi-zhu. Effect of B4C particles on microstructure and wear resistance of Co-based alloy laser cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (3): 61-64.
    [9]WU Ping, JIANG En yong, ZHAO Ci, ZHOU Chang zhi, TANG Xi nan. Influence of laser cladding parameters on microstructure and wear-resistance of Ni-based alloy coatings[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (2): 44-46,50.
    [10]Tian Baohongl, Huang Jinliang, Wu Lei, Zhang Yimin, Zheng Shi'an. Effect of Rare-earth Oxide and Laser Remelting Technique on Wear Resistant of Composite Alloy Flame Spray Coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1996, (2): 88-93.
  • Cited by

    Periodical cited type(6)

    1. 王星星,田家豪,武胜金,康克家,凌自成,杜全斌,温国栋. WC含量对WC增强镍基复合涂层界面组织的影响. 焊接学报. 2024(01): 40-46+131-132 . 本站查看
    2. 詹怡阳,汪勇杰,栗正新. 金刚石耐磨涂层在水轮机叶片上的应用研究进展. 超硬材料工程. 2024(04): 25-31 .
    3. 吴奇隆,董显,张雷,钟素娟,陈治强,贾连辉,罗灵杰. WC对感应钎涂金刚石涂层组织及性能的影响. 金刚石与磨料磨具工程. 2023(05): 579-585 .
    4. 孙志鹏,张雷,朱晨颖,盛惠朋,李宇佳,钱志敏,孙华为. 农业旋耕刀具耐磨降阻减粘技术研究. 电焊机. 2023(12): 51-57 .
    5. 秦建,杨骄,龙伟民,钟素娟,刘攀,杨浩哲. 金刚石及其复合材料增材技术研究进展. 机械制造文摘(焊接分册). 2023(06): 1-11 .
    6. 秦建,杨骄,龙伟民,钟素娟,刘攀,杨浩哲. 金刚石及其复合材料增材技术研究进展. 焊接学报. 2022(08): 102-112+120 . 本站查看

    Other cited types(3)

Catalog

    Article views (352) PDF downloads (32) Cited by(9)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return