Citation: | WEN Xue, WANG Honghui, QIAN Jiankang, LU Yingmin, ZHENG Liang, LEI Zhenglong. Cold crack susceptibility analysis of the copper backing outside root welding joints of X80M pipeline steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(12): 105-112. DOI: 10.12073/j.hjxb.20220408001 |
王炳英, 霍立兴, 张玉凤, 等. X80管线钢焊接接头的硫化氢应力腐蚀试验研究[J]. 压力容器, 2006, 23(7): 15 − 18. doi: 10.3969/j.issn.1001-4837.2006.07.004
Wang Bingying, Huo Lixing, Zhang Yufeng, et al. H2S stress corrosion test of welded joint for X80 pipeline steel[J]. Pressure Vessel Technology, 2006, 23(7): 15 − 18. doi: 10.3969/j.issn.1001-4837.2006.07.004
|
安琳, 徐学利. X80高强度管线钢的焊接性分析[J]. 石油矿场机械, 2008(6): 27 − 30. doi: 10.3969/j.issn.1001-3482.2008.06.008
An Lin, Xu Xueli. Weldability analysis of X80 high strength pipeline steel[J]. Petroleum Field Machinery, 2008(6): 27 − 30. doi: 10.3969/j.issn.1001-3482.2008.06.008
|
Zhao Xiaohui, Wang Hao, Liu Gen, et al. Research on the hydrogen assisted fatigue damage in X80 pipeline steel welded joint[J]. Materialstoday, 2022, 31: 103524.
|
Kasuya T, Yurioka N. Determination of necessary preheat temperature to avoid cold cracking under varying ambient temperature[J]. ISIJ International, 1995, 35(10): 1183 − 1189. doi: 10.2355/isijinternational.35.1183
|
Huang Zhijun, Hu Lunji, Miao Kai. Weldability and SAW welding wire of X80 pipeline steel[J]. China Welding, 2006, 15(1): 74 − 80.
|
张文钺. 焊接冶金学 (基本原理) [M]. 北京: 机械工业出版社, 1999.
Zhang Wenyue. Welding metallurgy: (basic principles) [M]. Beijing: China Machine Press, 1999.
|
张勇, 孙琳琳, 綦秀玲. 曲面冲击头随焊冲击旋转挤压法控制40Cr钢冷裂纹[J]. 中国机械工程, 2017, 28(9): 1097 − 1100. doi: 10.3969/j.issn.1004-132X.2017.09.016
Zhang Yong, Sun Linlin, Qi Xiuling. Research on preventing weld cold crack of 40Cr by impact revolution curved rod[J]. China Mechanical Engineering, 2017, 28(9): 1097 − 1100. doi: 10.3969/j.issn.1004-132X.2017.09.016
|
尹长华, 薛振奎, 闫臣. Nb-Cr X80管线钢冷裂敏感性分析[J]. 焊管, 2010, 33(1): 13 − 17,20. doi: 10.3969/j.issn.1001-3938.2010.01.004
Yin Zhanghua, Xue Zhenkui, Yan Chen. Cold cracking sensitivity analysis of Nb-Cr X80 grade pipeline steel[J]. Welded Pipe and Tube, 2010, 33(1): 13 − 17,20. doi: 10.3969/j.issn.1001-3938.2010.01.004
|
汪宏辉, 董淑磊, 钱建康, 等. 预热及保温对严寒环境X80钢管道全自动外焊焊缝组织与性能的影响[J]. 中国机械工程, 2021, 32(6): 748 − 755. doi: 10.3969/j.issn.1004-132X.2021.06.016
Wang Honghui, Dong Shulei, Qian Jiankang, et al. Effects of preheating and heat preservation on microstructure and properties of fully automatic external welding seams of X80 steel pipes in severe cold environment[J]. China Mechanical Engineering, 2021, 32(6): 748 − 755. doi: 10.3969/j.issn.1004-132X.2021.06.016
|
Turichin G A, Kuznetsov M, Pozdnyako V A, et al. Influence of heat input and preheating on the cooling rate, microstructure and mechanical properties at the hybrid laser-arc welding of API 5L X80 steel[J]. Procedia CIRP, 2018, 74: 748 − 751. doi: 10.1016/j.procir.2018.08.018
|
Cooper R, Silva J H F, Trevisan R E. Influence of preheating on API 5L-X80 pipeline joint welding with self-shielded flux-cored wire[J]. Welding International, 2005, 19(11): 882 − 887. doi: 10.1533/wint.2005.3494
|
Yi H J, Lee Y J, Kim J Y, et al. Effect of microstructure and chemical composition on cold crack susceptibility of high-strength weld metal[J]. Journal of Mechanical Science and Technology, 2011, 25(9): 2185 − 2193. doi: 10.1007/s12206-011-0529-2
|
张璐. X80钢混合气体保护焊焊接性及焊接工艺研究 [D]. 镇江: 江苏科技大学, 2014.
Zhang Lu. The research on GMAW weldability and welding procedure of X80 steel[D]. Zhenjiang: Jiangsu University of Science and Technology, 2014.
|
朱凤艳, 王琳, 张效铭, 等. 某X70管道环焊缝裂纹成因分析[J]. 热加工工艺, 2021, 50(17): 152 − 156.
Zhu Fengyan, Wang Lin, Zhang Xiaoming, et al. Cause analysis of girth weld crack in a X70 pipeline[J]. Hot Working Technology, 2021, 50(17): 152 − 156.
|
迟艳芬, 刘照元, 王振刚, 等. X70管线钢厚板多层多道焊残余应力数值分析[J]. 焊接, 2020(8): 9 − 15,61.
Chi Yanfen, Liu Zhaoyuan, Wang Zhengang, et al. Numerical simulation of multi-pass and multi-layer welding residual stress of X70 steel thick plate[J]. Welding & Joining, 2020(8): 9 − 15,61.
|
Lan L, Qiu C, Zhao D, et al. Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steel[J]. Materials Science & Engineering A, 2011, 529: 192 − 200.
|
You Y, Shang C, Nie W, et al. Investigation on the microstructure and toughness of coarse grained heat affected zone in X-100 multi-phase pipeline steel with high Nb content[J]. Materials Science & Engineering A, 2012, 558(15): 692 − 701.
|
许宁, 王峰会, 罗金恒, 等. X80管线钢焊接接头TEM观察下的断裂行为对比[J]. 中国机械工程, 2016, 27(3): 403 − 407. doi: 10.3969/j.issn.1004-132X.2016.03.022
Xu Ning, Wang Fenghui, Luo Jinheng, et al. Comparison of fracture behaviors of X80 pipeline steel welded joints under TEM observation[J]. China Mechanical Engineering, 2016, 27(3): 403 − 407. doi: 10.3969/j.issn.1004-132X.2016.03.022
|
赵朋成, 刘佳奇, 胡艺腾, 等. 焊缝错位对X80钢管应力分布影响的数值预测[J]. 青岛科技大学学报(自然科学版), 2020, 41(2): 75 − 850.
Zhao Pengcheng, Liu Jiaqi, Hu Yiteng, et al. Numerical prediction of the weld misalignment effect on stress distribution of X80 steel pipeline[J]. Journal of Qingdao University of Science and Technology (Natural Science Edition), 2020, 41(2): 75 − 850.
|
Reddy G M, Mohandas T, Sarma D. Cold cracking studies on low alloy steel weldments: effect of filler metal composition[J]. Science and Technology of Welding and Joining, 2003, 8(6): 407 − 414. doi: 10.1179/136217103225005552
|
刘成, 尹立孟, 姚宗湘, 等. 焊缝余高对复合型坡口X80管线钢多层多道焊接残余应力的影响[J]. 焊接学报, 2018, 39(12): 100 − 104. doi: 10.12073/j.hjxb.2018390306
Liu Cheng, Yin Limeng, Yao Zongxiang, et al. Effect of weld reinforcement on residual stress of multi-layer and multi pass welding of compound groove X80 pipeline steel[J]. Transactions of the China Welding Institution, 2018, 39(12): 100 − 104. doi: 10.12073/j.hjxb.2018390306
|
王炳英, 詹发福, 李慧玲, 等. 超声滚压加工对 X80管线钢焊接残余应力的影响[J]. 焊接学报, 2016, 37(12): 87 − 90.
Wang Bingying, Zhan Fafu, Li Huiling, et al. Effect of ultrasonic rolling on welding residual stress of X80 pipeline steel[J]. Transactions of the China Welding Institution, 2016, 37(12): 87 − 90.
|
李亚娟, 李午申. X80管线钢环焊缝接头残余应力的数值模拟[J]. 焊接学报, 2010, 31(6): 97 − 100.
Li Yajuan, Li Wushen. Numerical simulation of residual stress in wire joint of X80 pipeline[J]. Transactions of the China Welding Institution, 2010, 31(6): 97 − 100.
|
Efimenko L A, Elagina O Y, Kapustin O E, et al. Investigation of the weldability of high-strength pipe steels of X80 strength grade[J]. Welding International, 2010, 24(9): 714 − 717. doi: 10.1080/09507111003655606
|
严春妍, 张浩, 朱子江, 等. X80管线钢多道激光-MIG复合焊残余应力分析[J]. 焊接学报, 2021, 42(9): 28 − 34,41. doi: 10.12073/j.hjxb.20210312001
Yan Chunyan, Zhang Hao, Zhu Zijiang, et al. Residual stress analysis of multi pass laser MIG hybrid welding of X80 pipeline steel[J]. Transactions of the China Welding Institution, 2021, 42(9): 28 − 34,41. doi: 10.12073/j.hjxb.20210312001
|
Jian W, Lu S, Li Y, et al. Cold cracking sensitivity of a newly developed 9Cr2WVTa steel[J]. Journal of Materials Engineering and Performance, 2016, 26(1): 1 − 10.
|
[1] | XIN Chenglai, LI Ning, YAN Jiazhen. Investigation of brazing joints of Al2O3 ceramics to Kovar alloys by Ti+Nb/Mo metallization[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(9): 45-48. DOI: 10.12073/j.hjxb.2018390222 |
[2] | WANG Peng, LI Qiang, GAO Zeng, CHENG Dongfeng, NIU Jitai. Investigation on magnetron sputtering Ti film and vacuum brazing of SiCp/Al composites with high volume fraction[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(4): 43-46,82. |
[3] | WANG Zhenting, GAO Hongming, LIANG Gang, DING Yuanzhu. Microstructure and wear resistance of Ti-based composite coating reinforced by in-situ synthesized TiC and TiB2 particulates on surface of Ti6Al4V alloy with arc cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2014, 35(11): 51-54. |
[4] | ZONG Lin, LIU Zhengjun, GAO Hailiang, LI Lecheng. Research on wear resistance of compound material surfacing alloy with high vanadium content[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (9): 41-44,48. |
[5] | LIU Zhengjun, SONG Xingkui, TANG Xingtao. Microstructure and wear resistance of dissimilar metal surfacing layer[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (4): 99-102. |
[6] | CHANG Yunlong, LI Jingya, YANG Dianchen, JIN Wei. Influence of low frequency magnetic field on microstructure and wear resistance of submerged arc welding cladding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (2): 37-40. |
[7] | WANG Zhenting, QIN Lifu. Microstructure and wear resistance of argon arc cladding Ni-Mo-Zr-WC-B4_C composite coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (8): 13-16. |
[8] | LU Binfeng, LU Fenggui, TANG Xinhua, YAO Shun. Wear resistance of chromium carbides coating alloyed by vacaumelectron beam[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (11): 77-80. |
[9] | WU Ping, JIANG En yong, ZHAO Ci, ZHOU Chang zhi, TANG Xi nan. Influence of laser cladding parameters on microstructure and wear-resistance of Ni-based alloy coatings[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2003, (2): 44-46,50. |
[10] | Tian Baohongl, Huang Jinliang, Wu Lei, Zhang Yimin, Zheng Shi'an. Effect of Rare-earth Oxide and Laser Remelting Technique on Wear Resistant of Composite Alloy Flame Spray Coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1996, (2): 88-93. |
1. |
曲杰,王洋,王强,陈少波. 20G+316L复合钢管焊接工艺研究. 焊接技术. 2023(12): 94-99 .
![]() | |
2. |
刘永滨,杜华,徐哲. 钢质燃气管道贯穿孔固相摩擦塞焊修补方法研究. 机械制造文摘(焊接分册). 2018(06): 39-43 .
![]() |