Advanced Search
YANG Weiran, JI Tongtong, DING Yu, WANG Fengjiang. Effect of Bi addition on interfacial microstructures and properties of Sn-1.0Ag-0.5Cu Pb-free solder joints during isothermal aging and thermal cycling[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(11): 157-162. DOI: 10.12073/j.hjxb.20220709003
Citation: YANG Weiran, JI Tongtong, DING Yu, WANG Fengjiang. Effect of Bi addition on interfacial microstructures and properties of Sn-1.0Ag-0.5Cu Pb-free solder joints during isothermal aging and thermal cycling[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(11): 157-162. DOI: 10.12073/j.hjxb.20220709003
shu

Effect of Bi addition on interfacial microstructures and properties of Sn-1.0Ag-0.5Cu Pb-free solder joints during isothermal aging and thermal cycling

  • Jiangsu University of Science and Technology, Zhenjiang, 212000, China

More Information
  • Received Date: July 08, 2022
  • Available Online: November 06, 2022
    Graphical Abstract
    • Abstract
  • Effect of Bi addition into Sn-1.0Ag-0.5Cu (SAC105) Pb-free solder on the interfacial microstructural evolution in BGA solder joints was studied, and the shear properties of solder joints during isothermal aging and thermal cycling were analyzed The results showed that 2wt.% Bi addition into SAC105 depressed the growth intermetallic compound (IMC) thickness at the interface of solder joints during thermal cycling, and also depressed the breaking of interfacial IMC layer caused by thermal mismatch of solder joints during the thermal cycle. However, Bi addition can also increase the shear strength of SAC105 solder joints during thermal cycling or isothermal aging, while the effect of thermal cycling treatment on shear properties on SAC105-2Bi solder joints is little. Compared with SAC105 solder joints, Bi addition changed the failure mode from ductile to brittle mode of SAC105-2Bi solder joints during thermal conditions. Therefore, Bi addition decreased the thermal cycling reliability of SAC105 solder joints.
    • FullText(HTML)
    • References (19)
  • Terashima S, Kariya Y, Hosoi T, et al. Effect of silver content on thermal fatigue life of Sn-xAg-0.5Cu flip-chip interconnects[J]. Journal of Electronic Materials, 2003, 32(12): 1527 − 1533. doi: 10.1007/s11664-003-0125-z
    Shnawah A A, Said S, Sabri M, et al. Microstructure, mechanical, and thermal properties of the Sn-1Ag-0.5Cu solder alloy bearing Fe for electronics applications[J]. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2012, 551: 160 − 168. doi: 10.1016/j.msea.2012.04.115
    El-Daly A A, Fawzy A, Mansour S F, et al. Thermal analysis and mechanical properties of Sn-1.0Ag-0.5Cu solder alloy after modification with SiC nano-sized particles[J]. Journal of Materials Science: Materials in Electronics, 2013, 24(8): 2976 − 2988. doi: 10.1007/s10854-013-1200-8
    Qu J F , Xu J, Hu Q, et al. Modification of Sn-1.0Ag-0.5Cu solder using nickel and boron[J]. Rare Metals, 2015, 34(11): 783 − 788. doi: 10.1007/s12598-014-0221-7
    王丽凤, 孙凤莲, 刘晓晶, 等. Sn-Ag-Cu-Bi钎料合金设计与组织性能分析[J]. 焊接学报, 2008, 29(7): 9 − 12. doi: 10.3321/j.issn:0253-360X.2008.07.003

    Wang Lifeng, Sun Fenglian, Liu Xiaojing, et al. Design of Sn-Ag-Cu-Bi solder alloy and analysis on microstructure and properties[J]. Transactions of the China Welding Institution, 2008, 29(7): 9 − 12. doi: 10.3321/j.issn:0253-360X.2008.07.003
    Wen Y N, Zhao X C, Chen Z, et al. Reliability enhancement of Sn-1.0Ag-0.5Cu nano-composite solders by adding multiple sizes of TiO2 nanoparticles[J]. Journal of Alloys and Compounds, 2017, 696: 799 − 807. doi: 10.1016/j.jallcom.2016.12.037
    Shnawah A A, Sabri M F M, Badruddin I A, et al. The bulk alloy microstructure and mechanical properties of Sn-1Ag-0.5Cu-xAl solders (x=0, 0.1 and 0.2 wt. %)[J]. Journal of Materials Science Materials in Electronics, 2012, 23(11): 1988 − 1997. doi: 10.1007/s10854-012-0692-y
    Cheng H K, Huang C W, Lee H, et al. Interfacial reactions between Cu and SnAgCu solder doped with minor Ni[J]. Journal of Alloys and Compounds, 2015, 622: 529 − 534. doi: 10.1016/j.jallcom.2014.10.121
    Leong Y M, Haseeb A. Soldering characteristics and mechanical properties of Sn-1.0Ag-0.5Cu solder with minor aluminum addition[J]. Materials, 2016, 9(7): 522. doi: 10.3390/ma9070522
    吴洁, 薛松柏, 于志浩, 等. Nd对Sn-3.8Ag-0.7Cu/Cu焊点高温可靠性的影响[J]. 焊接学报, 2021, 42(7): 9 − 13. doi: 10.12073/j.hjxb.20201211002

    Wu Jie, Xue Songbai, Yu Zhihao, et al. Effect of Nd on the high temperature reliability of Sn-3.8Ag-0.7Cu/Cu solder joint[J]. Transactions of the China Welding Institution, 2021, 42(7): 9 − 13. doi: 10.12073/j.hjxb.20201211002
    梁伟良, 薛鹏, 何鹏, 等. 超低银SAC钎料焊点界面显微组织演化[J]. 焊接学报, 2018, 39(11): 39 − 42. doi: 10.12073/j.hjxb.2018390269

    Liang Weiliang, Xue Peng, He Peng, et al. Microstructures evolution of low silver SnAgCu solder joint[J]. Transactions of the China Welding Institution, 2018, 39(11): 39 − 42. doi: 10.12073/j.hjxb.2018390269
    Leong Y M, Haseeb A, Nishikawa H, et al. Microstructure and mechanical properties of Sn-1.0Ag-0.5Cu solder with minor Zn additions[J]. Journal of Materials Science Materials in Electronics, 2019, 30(13): 11914 − 11922. doi: 10.1007/s10854-019-01532-5
    Mandavifard M H, Sabri M, Said S M, et al. High stability and aging resistance Sn-1Ag-0.5Cu solder alloy by Fe and Bi minor alloying[J]. Microelectronic Engineering, 2019, 208: 29 − 38. doi: 10.1016/j.mee.2019.01.011
    孟涛, 杨莉. Bi元素对SAC305钎料合金组织和性能的影响[J]. 热加工工艺, 2015, 44(7): 209 − 211. doi: 10.14158/j.cnki.1001-3814.2015.07.062

    Meng Tao, Yang Li. Effect of Bi element on microstructure and property of SAC305 solder alloy[J]. Hot Working Technology, 2015, 44(7): 209 − 211. doi: 10.14158/j.cnki.1001-3814.2015.07.062
    Chen Y, Meng Z C, Gao L Y, et al. Effect of Bi addition on the shear strength and failure mechanism of low-Ag lead-free solder joints[J]. Journal of Materials Science: Materials in Electronics, 2021, 32(2): 2172 − 2186. doi: 10.1007/s10854-020-04982-4
    Waduge G D, Baty G, Lee Y, et al. Isothermal aging effect on Sn-58Bi solder interconnect mechanical shear stability[J]. Journal of Electronic Materials, 2022, 51(3): 1169 − 1179. doi: 10.1007/s11664-021-09379-5
    Shang P J, Liu Z Q, Li D X, et al. Bi-induced voids at the Cu3Sn/Cu interface in eutectic SnBi/Cu solder joints[J]. Scripta Materialia, 2008, 58(5): 409 − 412. doi: 10.1016/j.scriptamat.2007.10.025
    Liu C Z, Zhang W. Bismuth redistribution induced by intermetallic compound growth in SnBi/Cu microelectronic interconnect[J]. Journal of Materials Science, 2009, 44(1): 149 − 153. doi: 10.1007/s10853-008-3118-8
    Kang T Y, Xiu Y Y, Liu C Z, et al. Bismuth segregation enhances intermetallic compound growth in SnBi/Cu microelectronic interconnect[J]. Journal of Alloys and Compounds, 2011, 509(5): 1785 − 1789. doi: 10.1016/j.jallcom.2010.10.040
    • Related Articles

  • Related Articles

    [1]FAN Jiaxing, HAN Yongquan, ZHANG Liguo, SUN Zhenbang. Microstructure and mechanical properties of 2A12 aluminum alloy VPPA welded joint with Ar-He mixed shielding gas[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2025, 46(1): 112-120. DOI: 10.12073/j.hjxb.20231019001
    [2]CHEN Daming, HU Lifang, SHI Fangrong, MENG Qinsen. Mechanism and mechanical property of Si-glass-Si anodic bonding process[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(2): 123-127. DOI: 10.12073/j.hjxb.2019400054
    [3]ZHAO Xiaokang1, CAO Rui1, ZHANG Xiaobo1, ZHANG Ruihua2, CHEN Jianhong1. Microstructure and mechanical properties of multilayered steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(1): 45-49. DOI: 10.12073/j.hjxb.2018390011
    [4]QIAO Jisen, GOU Ningnian, XU Xuemei, CHEN Jianhong. Mechanical property testing and analysis of T-joints in sandwich panels[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (5): 13-16.
    [5]ZHENG Lijuan, CHAI Xuan, HAN Xiaojuan, FU Yuming. Analysis on electromagnetic heat strengthening of welded joint with embedding crack and mechanical performance testing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (10): 5-8.
    [6]LIANG Caiping, ZHANG Yansong, LAI Xinmin, CHEN Guanlong. Mechanical properties of ring nugget in sheet-to-tube joining[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (8): 49-53.
    [7]QIAO Ji-sen, ZHOU Qing-lin, ZHU Liang, CHEN Jian-hong. Characterization of mechanical properties for aluminium alloy welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (11): 41-44,49.
    [8]HAO Guo-jian, LIN Zhi, LIN Jun-pin, WANG Yan-li, CHEN Guo-liang. Analysis of microstructure and mechanical properties of Be/Al weld[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (5): 89-92.
    [9]Sun Daqian, Zhou Zhenfeng, Ren Zhenan. Microstructure and Mechanical Properties of Austempered Ductile Iron Welds[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1995, (4): 202-207.
    [10]Shi Yaowu, Zhou Ningning, Zhang Xinping, Tang Wei, Lei Yongping. Microshear test and its evaluation to mechanical properties of welded joints[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (4): 235-240.

Catalog

    Get Citation
    PDF
    XML
    Article views (378) PDF downloads (59) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return