Advanced Search
ZHAO Dawei, WANG Yuanxun, LIANG Dongjie, Yuriy Bezgans. Prediction of nugget diameter in resistance spot welding of titanium alloys based on dynamic characteristics of power signals[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(1): 55-59. DOI: 10.12073/j.hjxb.20210828001
Citation: ZHAO Dawei, WANG Yuanxun, LIANG Dongjie, Yuriy Bezgans. Prediction of nugget diameter in resistance spot welding of titanium alloys based on dynamic characteristics of power signals[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(1): 55-59. DOI: 10.12073/j.hjxb.20210828001

Prediction of nugget diameter in resistance spot welding of titanium alloys based on dynamic characteristics of power signals

More Information
  • Received Date: August 27, 2020
  • Available Online: February 14, 2022
  • The power signal in the welding process was employed for the thickness of 0.4 mm TC2 titanium alloy in order to monitor and predict the nugget diameter. The voltage between the upper and lower electrode was obtained using the twisted pair cable and the welding current was acquired based on the Rogowski coil. On this basis, the welding power curve during the resistance spot welding process was obtained. The changes of the welding power curve during the welding process were analyzed, and the characteristic values that characterize the welding quality were extracted. The results show that the welding power curve was not only consistent with the change of the dynamic resistance curve, but also more related to the input of welding heat input. The correlation coefficient between welding heat input, accurately extracted from welding power curve, and nugget diameter is as high as 0.9. A mathematical model for predicting the nugget diameter with the eigenvalues of the dynamic power curve can be obtained through the powerful nonlinear mapping ability of the kriging algorithm. The maximum relative error between the predicted value and the actual value of the model was about 8.7%, which can effectively predict and monitor the welding quality of TC2 resistance spot welding with a thickness of 0.4 mm in real time.
  • 杨龙, 杨冰, 阳光武, 等. 不锈钢车体点焊接头疲劳特性分析[J]. 焊接学报, 2020, 41(7): 18 − 24. doi: 10.12073/j.hjxb.20191204005

    Yang Long, Yang Bing, Yang Guangwu, et al. Analysis on fatigue characteristics of spot welded joints of stainless steel car body[J]. Transactions of the China Welding Institution, 2020, 41(7): 18 − 24. doi: 10.12073/j.hjxb.20191204005
    Xia Y J, Shen Y, Zhou L, et al. Expulsion intensity monitoring and modeling in resistance spot welding based on electrode displacement signals[J]. Journal of Manufacturing Science and Engineering, 2021, 143(3): 031008. doi: 10.1115/1.4048441
    Summerville C, Adams D, Compston P, et al. Nugget diameter in resistance spot welding: a comparison between a dynamic resistance based approach and ultrasound C-scan[J]. Procedia Engineering, 2017, 183: 257 − 263. doi: 10.1016/j.proeng.2017.04.033
    Bag S, DiGiovanni C, Han X, et al. A phenomenological model of resistance spot welding on liquid metal embrittlement severity using dynamic resistance measurement[J]. Journal of Manufacturing Science and Engineering, 2020, 142(3): 031007. doi: 10.1115/1.4046162
    Guan S, He X, Wang X, et al. Multiphysics simulation of the resistance spot welding detection using electromagnetic ultrasonic transverse wave[J]. The International Journal of Advanced Manufacturing Technology, 2020, 110(1): 79 − 88.
    陈树君, 郝键, 李方, 等. 铝合金电阻点焊压力信号的动态特征分析[J]. 焊接学报, 2020, 41(3): 1 − 6. doi: 10.12073/j.hjxb.20190124002

    Chen Shujun, Hao Jian, Li Fang, et al. Dynamic characteristics analysis of resistance spot welding pressure signal of aluminum alloy[J]. Transactions of the China Welding Institution, 2020, 41(3): 1 − 6. doi: 10.12073/j.hjxb.20190124002
    曾凯, 孙晓婷, 邢保英, 等. DP780高强钢胶接点焊的工艺优化及断裂特征分析[J]. 焊接学报, 2020, 41(4): 77 − 83. doi: 10.12073/j.hjxb.20191017001

    Zeng Kai, Sun Xiaoting, Xing Baoying, et al. Process optimization and fracture characteristic analysis of DP780 high strength steel weld-bonding[J]. Transactions of the China Welding Institution, 2020, 41(4): 77 − 83. doi: 10.12073/j.hjxb.20191017001
    Bin W, Shuili G, Li C, et al. Microstructure and mechanical properties of TC2 titanium alloy laser welded joints[J]. Rare Metal Materials and Engineering, 2013, 42: 136 − 138.
    Fatmahardi I, Mustapha M, Ahmad A, et al. An exploratory study on resistance spot welding of titanium alloy Ti-6Al-4V[J]. Materials, 2014, 14(9): 2336.
    孔谅, 刘思源, 王敏. 先进高强钢电阻点焊接头的断裂模式分析与预测[J]. 焊接学报, 2020, 41(1): 12 − 17.

    Kong Liang, Liu Siyuan, Wang Min. Failure mode analysis and prediction of resistance spot welding joints of advanced high strength steel[J]. Transactions of the China Welding Institution, 2020, 41(1): 12 − 17.
    Zhao D, Ivanov M, Wang Y, et al. Welding quality evaluation of resistance spot welding based on a hybrid approach[J]. Journal of Intelligent Manufacturing, 2021, 32: 1819 − 1832. doi: 10.1007/s10845-020-01627-5
    García-Gutiérrez A, Gonzalo J, Domínguez D, et al. Stochastic optimization of high-altitude airship envelopes based on kriging method[J]. Aerospace Science and Technology, 2020, 120: 107251.
    吕小青, 王旭, 徐连勇, 等. 基于组合模型的MAG焊工艺参数多目标优化[J]. 焊接学报, 2020, 41(2): 6 − 11. doi: 10.12073/j.hjxb.20190629001

    Lü Xiaoqing, Wang Xu, Xu Lianyong, et al. Multi-objective optimization of MAG process parameters based on ensemble models[J]. Transactions of the China Welding Institution, 2020, 41(2): 6 − 11. doi: 10.12073/j.hjxb.20190629001
  • Related Articles

    [1]WAN Rui1,2, LUO Yi1,2, ZHU Liang1,2, XU Jie1,2. Analysis of the resistance characteristics of nugget nucleation in the resistance spot welding with TiO2 powder addition[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2018, 39(3): 71-74. DOI: 10.12073/j.hjxb.2018390071
    [2]YAN Fuyu, LI Yang, LUO Zhen, TAN Hui, LUO Tong. Effect of external magnetic field on nugget shift of aluminum alloy resistance spot weld with unequal thickness[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2016, 37(2): 67-70.
    [3]JI Chuntao, DENG Lipeng. Data characteristics of resistance spot welding of aluminum and mild steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (3): 102-104.
    [4]WANG Hao, LUO Zhen, ZHOU Linshu, ZHANG Di. Study on influence of CNT to nugget of aluminum alloy spot welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (2): 49-52.
    [5]SHEN Jie, LIN Haolei, ZHANG Yansong, CHEN Guanlong. Control method for nugget size of resistance spot welding of three-layer steels with different thickness and strength[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2012, (1): 33-36.
    [6]LIU Kai, GANG Tie. Ultrasonic echo features and nugget diameter measuring for welding spot of aluminum alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (8): 105-108.
    [7]XUE Zhiqing, LUO Zhen, SHAN Ping, LIU Ying, Wang Rui. Inversion imaging of nugget cross-section in aluminum alloy resistance spot welding[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2010, (2): 87-90.
    [8]ZHANG Xuqiang, ZHANG Yansong, LIU Yancong, CHEN Guanlong. Effect of pitting on nugget formation in spot welding hot-galvanization steels with high strength[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (5): 17-20.
    [9]TANG Xinxin, SHAN Ping, LUO Zhen, YE Mao. Inverse design of spot welding nugget sizes and current parameters[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2007, (11): 45-48.
    [10]LI Yong-bing, LIN Zhong-qin, LAI Xin-min, CHEN Guan-long. Analysis of nugget formation process in resistance spot welding based on magnetic fluid dynamics theory[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (7): 41-44.
  • Cited by

    Periodical cited type(7)

    1. 韩念梅,冯迪,陈家劲,吴彤,张保玲,唐建国. 焊前状态对7055铝合金焊接接头组织与性能的影响. 材料热处理学报. 2025(03): 226-238 .
    2. 许楠,张柏硕,齐天祥,刘朝阳,徐玉缀,宋亓宁,包晔峰. HSn70-1锡黄铜冷源辅助搅拌摩擦焊搅拌区的强化机制和应变硬化行为. 焊接学报. 2024(01): 17-22+130 . 本站查看
    3. 陈文雅,宋娓娓,汪洪峰. 聚丙烯塑料搅拌摩擦连接区性能分析. 塑料科技. 2024(12): 93-96 .
    4. 程哲闻,张可,吕晓辉,蒋元宁,石磊. 铝锂合金的搅拌摩擦焊及其改型工艺研究进展. 电焊机. 2023(03): 46-53+71 .
    5. 徐桂芳,张杰,宋瑞智,王嘉. 人工时效对喷射成形2195-T4搅拌摩擦焊接头组织与性能的影响. 材料热处理学报. 2023(05): 217-226 .
    6. 张贤昆,石磊,武传松,李胜利. 铝/钛异种金属超声振动强化搅拌摩擦焊接工艺试验研究. 航天制造技术. 2023(04): 7-11 .
    7. 苏海龙,骆宗安,谢广明,王浩. 真空搅拌摩擦焊机的研制. 焊接. 2022(10): 37-42 .

    Other cited types(7)

Catalog

    Article views (311) PDF downloads (34) Cited by(14)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return