Advanced Search
FAN Chenglei, CHEN Chao, LIN Sanbao, YANG Chunli, DI zhongju. Effect of welding parameters on holographic interferometric fringe in TIG[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(2): 1-5. DOI: 10.12073/j.hjxb.20190115004
Citation: FAN Chenglei, CHEN Chao, LIN Sanbao, YANG Chunli, DI zhongju. Effect of welding parameters on holographic interferometric fringe in TIG[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(2): 1-5. DOI: 10.12073/j.hjxb.20190115004

Effect of welding parameters on holographic interferometric fringe in TIG

More Information
  • Received Date: January 14, 2019
  • Available Online: July 12, 2020
  • The effect of welding current, welding arc length and gas flow rate on holographic interference fringe was investigated. During holographic interference test, the reasonable range of the welding parameters is presented, and the calculation of the holographic interferometric arc temperature field is enumerated. the results shown that when the welding current less than100 A, welding arc length 4 ~ 14 mm and protecting air flow less than 6 L/min, the clear of holographic interference fringes can be obtain. The influence degree of welding current (R1), welding arc length (R2) and the protection of gas flow (R3) on the number of interference fringes (N1) on the tungsten tip, the center of circle transverse diameter (d1) and that of the radial diameter (d2) are R2 > R1 > R3, R2 > R3 > R1 and R2 > R1 > R3.
  • 秦国梁, 冯超, 江海红, 等. 电弧能量匹配对前后列置双TIG高速焊接焊缝组织与性能的影响[J]. 焊接学报, 2019, 40(11): 39 − 44.

    Qin Guoliang, Feng Chao, Jiang Haihong, et al. Microstructure and properties of weld by high-speed tandem TIG welding of different arc power matching[J]. Transactions of the China Welding Institution, 2019, 40(11): 39 − 44.
    郭楠, 余永健, 殷咸青, 等. 薄板TIG堆焊屈曲变形的预测[J]. 焊接学报, 2019, 40(10): 116 − 120.

    Guo Nan, Yu Yongjian, Yin Xianqing, et al. Prediction on thin plate welding buckling of TIG bead welding[J]. Transactions of the China Welding Institution, 2019, 40(10): 116 − 120.
    Awais A, Dong Honggang, Xia Yueqing, et al. Lap joining Al5052 to Ti6Al4V by GTAW with AlSi5 filler wire[J]. China Welding, 2019, 28(2): 15 − 23.
    刘政军, 李宇航, 苏允海. Ar与H 2混合气体保护下GTAW电弧特性数值模拟[J]. 焊接学报, 2019, 40(7): 67 − 71. doi: 10.12073/j.hjxb.2019400183

    Liu Zhengjun, Li Yuhang, Su Yunhai. Numerical simulation of arc characteristics under mixtures of argon and hydrogen in gas tungsten arc welding[J]. Transactions of the China Welding Institution, 2019, 40(7): 67 − 71. doi: 10.12073/j.hjxb.2019400183
    Varma S S, Srivastava A. Real-time two-color interferometric technique for simultaneous measurements of temperature and solutal fields[J]. International Journal of Heat & Mass Transfer, 2016, 98: 662 − 674.
    Martínez-González A, Moreno-Hernández D, Monzón-Hernández D, et al. Wide range instantaneous temperature measurements of convective fluid flows by using a schlieren system based in color images[J]. Optics & Lasers in Engineering, 2017, 93: 66 − 75.
    彭劲松, 冯斌. 大功率晶体三极管温度场的激光全息干涉测量[J]. 半导体光电, 2001, 22(5): 369 − 371. doi: 10.3969/j.issn.1001-5868.2001.05.020

    Peng Jinsong, Feng Bin. Laser holographic interferometry of temperature field in high power transistor[J]. Semiconductor Optoelectronics, 2001, 22(5): 369 − 371. doi: 10.3969/j.issn.1001-5868.2001.05.020
    雷岚, 曹娜, 曹亮, 等. 有限宽全息干涉技术对等离子体电子密度的诊断[J]. 中国激光, 2015, 42(1): 74 − 78.

    Lei Lan, Cao Na, Cao Liang, et al. Diagnosis of plasma electron density by finite width holographic interferometry[J]. Chinese Journal of Lasers, 2015, 42(1): 74 − 78.
    肖文, 赵晨晓, 潘锋, 等. 基于数字全息层析的温度场三维检测方法[J]. 现代电子技术, 2015(4): 121 − 124. doi: 10.3969/j.issn.1004-373X.2015.04.033

    Xiao Wen, Zhao Chenxiao, Pan Feng, et al. Three dimensional temperature field detection method based on digital holography[J]. Modern Electronics Technique, 2015(4): 121 − 124. doi: 10.3969/j.issn.1004-373X.2015.04.033
    Ma H, Zhang Y. Application of the real-time digital holograph in the measurement of temperature field[J]. Laser Journal, 2009, 30(3): 24 − 25.
  • Related Articles

    [1]WANG Yongdong, GONG Shulin, TANG Mingri, SONG Min. Effect of laser cladding process on the microstructure and properties of high entropy alloys[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2023, 44(8): 116-122. DOI: 10.12073/j.hjxb.20220928001
    [2]LI Peng, LIAN Runkang, MA Chaoqun, DONG Honggang. Effect of processing pass on the microstructure and properties of high entropy alloy reinforced aluminum matrix composites via FSP[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2022, 43(6): 11-19. DOI: 10.12073/j.hjxb.20211230001
    [3]WANG Leilei, LIU Ting, DUAN Shuyao, ZHAN Xiaohong. Effect of element distribution on the microstructure of FeCoCrNi high entropy alloy coating[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2021, 42(11): 57-64. DOI: 10.12073/j.hjxb.20210707004
    [4]YIN Yan, KANG Ping, LU Chao, ZHANG Yuan, ZHANG Ruihua. Microstructure and microhardness analysis of laser welded dissimilar steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2020, 41(7): 71-77. DOI: 10.12073/j.hjxb.20191227002
    [5]YIN Yan, PAN Cunliang, ZHAO Chao, ZHANG Ruihua, QU Yuebo. Formation mechanism of microstructure of laser cladding high chromium Fe-based alloy and its effect on microhardness[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(7): 114-120. DOI: 10.12073/j.hjxb.2019400192
    [6]WANG Ke, ZHENG Zhentai, XUE Haitao, SONG Hongwei. Microstructure of 254SMO/Q235B dissimilar steel welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2013, (2): 105-108.
    [7]WANG Jianxin, YIN Ming, LAI Zhongmin, LI Xue. Wettability and microstructure of Sn-Ag-Cu-In solder[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2011, (11): 69-72.
    [8]MA Chong, JING Hongyang, XU Lianyong, XU Delu, CHEN Yucheng. Microstructure investigation on Type Ⅳ cracking in P92 steel[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2009, (8): 49-52.
    [9]TIAN Jun, HAO Hu, SHI Yao-wu, XIA Zhi-dong. Microstructure of lead-free solder for a SnAgCuEr system[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2006, (9): 31-34.
    [10]LIU Xiu-zhong, YANG De-xin, ZOU Zeng-Da, DAI Jia-hui. Microstructure and characteristics of soldered joint of high strength ZA alloy[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2004, (6): 59-61,65.
  • Cited by

    Periodical cited type(0)

    Other cited types(1)

Catalog

    Article views (383) PDF downloads (14) Cited by(1)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return