Advanced Search
WANG Leilei, ZHANG Zhanhui, XU Dewei, XUE Jiaxiang, ZENG Min. Numerical simulation and mechanism study of grain refinement during double pulsed wire arc additive manufacturing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(4): 137-140. DOI: 10.12073/j.hjxb.2019400114
Citation: WANG Leilei, ZHANG Zhanhui, XU Dewei, XUE Jiaxiang, ZENG Min. Numerical simulation and mechanism study of grain refinement during double pulsed wire arc additive manufacturing[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2019, 40(4): 137-140. DOI: 10.12073/j.hjxb.2019400114
shu

Numerical simulation and mechanism study of grain refinement during double pulsed wire arc additive manufacturing

  • 1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China;

  • 2. State Grid HLJ Electric Power T & T Engineering Co., Ltd., Harbin 150070, China

More Information
  • Received Date: December 01, 2017
    Graphical Abstract
    • Abstract
  • Arc additive manufacturing has the advantages of low cost and high efficiency. However, there are few reports on grain refinement. Double pulsed arc additive manufacturing experiments were carried out by using self-developed gas metal arc welding equipment, grain refinement phenomenon was predicted by using the cooling rate; experimental results also verified the grain refinement phenomenon. Results indicated that remelting phenomenon occurred near the trailing edge due to the expansion of the molten pool. Therefore, double pulsed arc features higher cooling rate and finer grain than conventional single pulsed arc under same heat input. Grain refinement could be achieved by changing pulsing parameters instead of conventionally changing heat input.
    • FullText(HTML)
    • References (13)
  • Miao Yugang, Zeng Yang, Wang Teng, et al. Additive manufacturing process of aluminum/steel dissimilar metal based on BC-MIG welding[J]. Transactions of the China Welding Institution, 2015, 36(7): 5 − 8
    苗玉刚, 曾 阳, 王 腾, 等. 基于BC-MIG焊的铝/钢异种金属增材制造工艺[J]. 焊接学报, 2015, 36(7): 5 − 8
    柏久阳, 范成磊, 杨雨晨, 等. 2219铝合金TIG填丝堆焊成形薄壁试样组织特征[J]. 焊接学报, 2016, 37(6): 124 − 128
    Bai Jiuyang, Fan Chenglei, Yang Yuchen, et al. Microstructures of 2219-Al thin-walled parts produced by shaped metal deposition[J]. Transactions of the China Welding Institution, 2016, 37(6): 124 − 128
    Zhang Yu, Luo Zhen, Tan Hui, et al. Hybrid 3D processing technology based on build-up welding and electrolytic machining[J]. Transactions of the China Welding Institution, 2015, 36(8): 39 − 42
    张 禹, 罗 震, 谈 辉, 等. 基于堆焊-电解的复合3D加工技术[J]. 焊接学报, 2015, 36(8): 39 − 42
    刘一搏, 孙清洁, 姜云禄, 等. 基于冷金属过渡技术快速成形工艺[J]. 焊接学报, 2014, 35(7): 1 − 4
    Liu Yibo, Sun Qingjie, Jiang Yunlu, et al. Rapid prototyping process based on cold metal transfer arc welding technology[J]. Transactions of the China Welding Institution, 2014, 35(7): 1 − 4
    柏久阳, 王计辉, 林三宝, 等. 铝合金电弧增材制造焊道宽度尺寸预测[J]. 焊接学报, 2015, 36(9): 87 − 90
    Bai Jiuyang, Wang Jihui, Lin Sanbao, et al. Width prediction of aluminium alloy weld additively manufactured by TIG arc[J]. Transactions of the China Welding Institution, 2015, 36(9): 87 − 90
    柏久阳, 范成磊, 林三宝, 等. 基板散热作用对电弧堆焊成形中熔宽调控的影响[J]. 焊接学报, 2016, 37(3): 115 − 119
    Bai Jiuyang, Fan Chenglei, Lin Sanbao, et al. Effects of base-plate's heat sink on the control strategies of weld width during GTA-additive manufacturing[J]. Transactions of the China Welding Institution, 2016, 37(3): 115 − 119
    David S A, Vitek J M. Correlation between solidification parameters and weld microstructures[J]. International Materials Rev-iews, 1989, 34(1): 213 − 245.
    • Related Articles

  • Related Articles

    [1]HUANG Chaoqun1, LI Huan1, LUO Chuanguang1,2, SONG Yonglun3. Comparative study of blind hole method and indentation method in measuring residual stress of 2219 aluminum alloy arc-welded joint[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(7): 54-58. DOI: 10.12073/j.hjxb.20150710004
    [2]SUN Jiantong, LI Xiaoyan, ZHANG Liang, YAO Wentao. Study of residual stress measurement of rolling aluminum alloy using x-Ray diffraction method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2017, 38(1): 61-64.
    [3]LIU Chuan, FENG Jun, ZHU Haiyang, LI Liangbi. Internal residual stress measurement of inertia friction welding joints based on contour method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2015, 36(6): 1-4.
    [4]LI Hao, LIU Yihua. Residual stress field in hole-drilling method-part II:application[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2008, (10): 33-36.
    [5]FU Peng-fei, LIU Fang-jun, FUGang, MAO Zhi-yong. Weld residual stress distribution of GH536 superalloy with EBW measuned by Mathar method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2005, (11): 21-23.
    [6]YA Min, DAI Fu-long, LU Jian. Study on Residual Stress of Friction Stir Welding by Moiré Interferometry and Hole-Drilling Method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (5): 53-56.
    [7]REN Wei-jia, WU Ai-ping, ZHAO Hai-yan, ZOU Gui-sheng. Finite Element Method Analysis on Welding Residual Stresses of Large Electromotor Rotor[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2002, (2): 92-96.
    [8]QI Xin, CHEN Juan, LIU Dian-kui. Assembly by Means of Local Magnetization Method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 2000, (3): 1-4.
    [9]Chen Huaining, Chen Liangshan, Dong Xiuzhong. Drilling strains in measuring residual stress with hole-drilling strain-gage method[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1994, (4): 276-280.
    [10]Meng Gongge. Reliability and precision of blind hole drilling method for determining high residual stresses[J]. TRANSACTIONS OF THE CHINA WELDING INSTITUTION, 1991, (4): 235-238.

Catalog

    Get Citation
    PDF
    XML
    Article views (257) PDF downloads (25) Cited by()
    Turn off MathJax
    Article Contents
    Abstract
    References
    Related Articles

    Website Copyright © Editorial Office of Transactions of the China Welding Institution, Welding Journals Publishing HouseTel：0451-86323218Address：No. 2077, Chuangxin Road, Songbei District, Harbin

    Supported by: Beijing Renhe Information Technology Co. Ltd    Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return